Firebee/m68k-bdm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
e3c583ab3667bc65a392bcb78e0222f1ddd6d576
m68k-bdm/m68k/README
Bernd Mueller adfd70813f initial push
2026-06-17 13:44:30 +02:00

910 lines
35 KiB
Plaintext
Raw Blame History

BDM GDB DRIVER AND LIBRARY PACKAGE
==================================
INTRODUCTION
============
This package contains everything you need to know to be able to run GDB on
Linux, FreeBSD, SCO Unix, and Windows and control a Motorola CPU32+ (68360) or
Coldfire (V2/V3/V4) target through a standard PC parallel port or via a USB
pod.
o The CPU32 interfaces supported are PD and the IDC interface. GDB
should now operate with the CPU32 processor without error.
o The Coldfire interface is the TBLCF USB pod or P&E parallel port type
interface.
o You can build Insight if you apply the Insight patch. See the
Insight README in this directory.
o For WindowsNT or Window2000 you will need the GiveIO package. You
are best to search the net for the GiveIO (giveio.sys) package. You
will also need the INSTDRV.EXE file that is also available on the net.
GiveIO has been test on Windows 2000 and Windows XP.
o For Unix users the library is built with I/O perm support by
default. The same library allows an application to directly
access the hardware or use an installed BDM kernel driver. On FreeBSD
this the "/dev/io" support.
I/O Permission is a means of getting at the parallel port hardware
without the need for a kernel driver. This BDM package still provides
support to build a kernel driver, but you do not need to if you want to
avoid kernel drivers. Some people wish to use kernel drivers and some do
not.
If you wish to learn more about I/O Perm support please refer to the
section at the end of the file.
You can disable I/O perm support by editing the Makefile. It is hoped
autoconf support in the future will provide a better way to handle this.
o To support the TBLCF UDB pod you will need the libusb package. For Windows
this means the LibUSB-Win32 package.
o Support for an initialisation script called '.m68kbdminit'. See the
section on Initialisation Scripts.
The subdirectories contain:
config
Autotools support files.
driver
Source for a Linux, SCO, FreeBSD, I/O Perm, and Windows BDM device
driver module.
gdbPatches
Move to outside this tree. Please refer to the Sourceforge
project for the patches.
gdbScripts
Example GDB command scripts that show how to initialize and run
a Motorola 68360 system using standard GDB commands.
gdbserver
A GDB Remote protocol server. Needs GDB 6.7 or later.
lib
User-level library routines for accessing the BDM device driver.
flashlib
Library for flash support. This library currently supports host-only
and host-assisted operation modes of 29Fxxx and 49Fxxx chips in
any combination of bus_width=[1|2|4] and chip_width=[1|2|4]. It is
already prepared for target-only operation mode and addition of different
flash algorithms.
local_scripts
Scripts to run on the host machine the driver is being installed
on.
server
The BDM server. This is a daemon which interfaces to the local BDM
driver remotely. The BDM library can be built to support local and remote,
just local or just remote access.
tblcf
The TBLCF code from Daniel Malik. It include the various tools for managing
the pod.
test
Programs to test the BDM library and driver routines.
utils
contains some utilities which might be useful.
README Files
============
There are 4 README files which document the BDM package. They are:
o README
This is the top level README file and the one you are currently readling.
o README.cvs
If you use the code from CVS you should read this file. It explains how
to bootstrap the package to create the configure script and Makefiles.
o README.bdmgdbserver
This file documents the BDM GDB Server. It explains why you should use
the BDM GDB Server to interface to GDB and how to build GDB.
o README.insight
This is an old README and may be useful to anyone still wanting to
use Insight as a GUI interface to GDB. A current Insight with a current
GDB should work with the BDM GDB Server.
WINDOWS
=======
Windows is supported on Windows 98, Windows 2000 and Windows XP. It may run on
other version of Windows, but the ones listed have been tested. Windows 2000,
Windows XP and beyond need to the GiveIO driver to gain direct access to the
parallel port hardware if you are using a parallel port pod. A USB pod need the
libusb software for Windows.
You can download the GiveIO package from the net plus you will need the
INSTDRV.EXE program. To install GiveIO place the 'giveio.sys' and INSTDRV.EXE
in a directory and log in as an Administrator or equivalent then:
c:\tmp> insdrv givio c:\tmp\giveio.sys
The package builds under Cygwin and MinGW.
The MinGW support provides you with a version that directly accesses the
Windows APIs and does not need a Cygwin DLL. To build with MinGW you need to
get the MinGW and MSYS packages from the MinGW web site:
http://www.mingw.org/
The MinGW package provides the compiler and MSYS provides a shell capable of
running the configure script.
To build the TBLCF USB pod support you need to obtain the LibUsb-Win32 package
from:
http://libusb-win32.sourceforge.net/
Click the Downloads link and move the Sourceforge download page then select the
libusb-win32-device-bin package. I have tested with the 0.1.12 version. Unpack
the tar file to a directory on your machine ready to use. Make sure you do not
have any spaces in the path. Spaces cause problems with the autoconf test for
the libusb library.
QUICK START
===========
You have unpacked the package. Next to the top of the package create an empty
directory and enter it, configure the package, make, then install.
$ tar xzf bdm-xx.tar.gz
$ mkdir build
$ cd build
$ ../gdb-bdm-xxx/m68k/configure
$ make
$ make install
Note: this process by default creates an IOPERM type parallel BDM driver and a
TBLCF USB driver. If you wish to build a Linux kernel driver please follow the
INSTALLATION directions.
INSTALLATION
============
The Makefiles in all the subdirectories are set up to install their
results in /usr/{bin,lib,.....}.
On FreeBSD remember to use `gmake' rather than `make'.
Notes:
1. For Windows move to Step 2 as the driver is built into the library. You
may also need to add `CC=gcc' to make's command line.
2. For I/O Permission or USB users move to step 2 as the driver is built
into the library.
3. Driver users will still have a library with I/O perm support unless the
default of the library Makefile is manually changed.
4. You can specify a different `prefix' for the installation directory by
running all the `make install' commands described below as:
$ make prefix=/some/directory install
Step 1 -- Compile and install the BDM device driver
If you do not wish to use a driver and just want the I/O perm support move to
Step 2.
Make sure the kernel source code is installed under the /usr/src path.
Support for more than Linux has been added. You must enter the OS specific
directory then enter the make command. We assume Linux for the remainder of
this file.
If your Linux kernel has been configured for module versions you must
uncomment the #MODVERSIONS=-DMODVERSIONS line in driver/linux Makefile. If
the kernel is configured for module versions and you fail to uncomment this
line the driver will install and work properly, but depmod will complain
about unresolved symbols.
For Coldfire users the driver now looks for the debug module version and will
use the PST signals if it detects a version 1 debug module. The debug version
1 is found on the 5307.
Disable the TBLCF code with the configure option '--disable-tblcf'.
# cd driver/linux
# make all install
You may get a bunch of error messages like:
In file included from /usr/include/linux/fs.h:277,
from linux-bdm.c:63:
/usr/include/linux/hpfs_fs_i.h:5: parse error before `ino_t'
/usr/include/linux/hpfs_fs_i.h:5: warning: no semicolon at \
end of struct or union
/usr/include/linux/hpfs_fs_i.h:12: parse error before `:'
If this happens, try adding `-I /usr/include' to the beginning of the CFLAGS
definition in the Makefile in driver/linux.
A script is provided in `local_scripts' called MAKEDEV which create the
special files needed for the CPU32 and Coldfire.
To make the special files by hand you can enter:
# mknod /dev/bdmcpu320 c 34 0
^^ ^
| |
| +--Minor device number (see below).
|
+--This value must match the
BDM_MAJOR_NUMBER in driver/bdm.h
To have the module module loaded by kerneld when needed
adding to /etc/conf.modules the line:
alias char-major-34 bdm
To automaticially load the driver into the kernel every time
you reboot you can add the line:
# /sbin/insmod bdm
to your startup script, such as /etc/rc.d/rc.local.
You will need to create the device names. The local script MAKEDEV can do
this for you:
# ./local_scripts/MAKEDEV
Step 2 -- Compile and install the library and user programs
The package provides a configure script that you use to build the
package. All testing I have performed is not to build in the source tree. For
the default configuration just run the configure script:
$ mkdir build
$ cd build
$ ../gdb-bdm-xx/m68k/configure
You will need to change the 'gdb-bdm-xx' to the name of the directory in the
version of the package you have downloaded.
On Windows if building the TBLCF driver you need to provide the location of
the libusb package. The details to download and obtain the libusb package for
Windows is detail above. Provide the path to the top of the libusb package:
$ ../gdb-bdm-xx/m68k/configure \
--with-usblib-dir="c:/work/libusb-win32-device-bin-0.1.12.1"
The above command is run inside the MSYS shell.
Once the package has configured itself you can make it:
$ make
To install you may need to obtain the appropriate permissions. Once you have:
$ make install
The library can be built to access a BDM driver locally via the kernel's
driver interface, remotely via a TCP/IP socket interfacei, or with direct
hardware access via the ioperm system call. You can have a library which
supports all or a mix of interfaces. This allows you to build the
library and therefore gdb on a host which does not support the driver
interface.
On Windows 2000 install the GiveIO driver. This is detailed in the WINDOWS
section earlier. To install the USB pod on Windows refer the TBLCF Pod
section later.
The package supports a number of configuration options over and above the
standard configure options such as '--prefix'. These are:
--enable-debug: Turn on compiler debug information
On by default.
--enable-remote: Turn on the remote protocol and build it into
the library. On by default.
--enable-ioperm: Turn on direct IOPERM hardware access. Enabled
if the OS provides the ioperm() system call.
--enable-driver: Turn on driver access from the library. Enabled
by default on systems that support it.
--enable-server: Turn on building the BDM server. On by default.
--enable-flashlib: Turn on building of the flashlib.
--enable-bdmctrl: Turn on building of the bdmctrl utility. Since there
might be problems to locate bfd.h/libbfd.a which
know how to handle target object files, building
the bdmctrl utility is disabled unless you have
specified the configure options --with-libbfd,
--with-libiberty and --with-bfd-include-dir.
--enable-tblcf: Turn on building the TBLCF support. On by default.
On Windows the --with-usblib-dir can be used to
provide the location of the unpacked Win32 libusb
package.
--with-libusb-dir Path, with no spaces to the libusb library if the
library is not installed in the default location.
To turn off an option use '--disable-*' where '*' is one of the above.
Some host settings automatically disable some options:
Linux : All default settings.
Cygwin: All default settings.
MinGW : Server is not built.
The prefix defaults to the platform specific default. Please refer to your
documentation for this default setting or just try and see what happens.
Note, the BDM library is now installed under the package directory of 'bdm'
under the prefix. For example a prefix of '/usr/local' as found on Linux
results in the library being under '/usr/local/lib/bdm/libBDM.a'.
The BDM package also supports cross-compiling. For example you can build
for a mingw32 host on a Linux machine if you have a MinGW cross-compiler
and runtime installed:
$ ../gdb-bdm-xx/m68k/configure --host=ming32 \
--build=`./gdb-bdm-xx/m68k/config/config.guess`
Step 3 -- Installing the Server
You only need the BDM server if you intend to use the ioperm method of
accessing the parallel port, or you wish to support remote access. If you
wish to use a driver and your access is local to your development machine
then this step may be skipped.
Before using the server, please make sure you understand the implications
of such a setup. You probably want to restrict access to the bdmd port
to trusted machines.
The BDM server allows a lab to contain your target hardware and you can
access it from your development machine. The BDM server can support clients
on different platforms. This means a Linux server can be accessed from MacOS
or Windows clients.
The server runs from the xinetd or inetd daemon, and installs into
the 'sbin' directory under the configure prefix when building the user
programs in Step 2 above.
You need to edit the /etc/services file to add the port number bdmd
uses. Add this line at the bottom of the /etc/services file:
bdm 6543/tcp # BDM server
The BDM remote library will check /etc/services to see if a port is
provided. If not found the remote library will default to 6543.
It is recommended you add the entry to /etc/services and you check
the client and server match.
For inetd users such as FreeBSD:
You need to edit the /etc/inetd.conf file. Add this line at the end of
/etc/inetd.conf:
bdm stream tcp nowait root /usr/local/sbin/bdmd bdmd
You can specify any user including root. If you are wishing to use the
ioperm support then the user must be root.
For xinetd users as root install the follow in a file called:
/etc/xinetd.d/bdm
service bdm
{
socket_type = stream
port = 6543
wait = no
user = root
server = /usr/sbin/bdmd
server_args = -n
log_on_failure += USERID
disable = no
}
then get xinetd to reload its configuration.
To test the bdmd server open a shell on the machine bdmd has been installed
and condigured. At the shell prompt run telnet as follows:
$ telnet localhost bdm
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
>> helo
HELO 2 ted BDM server 1.0.0 ready.
>> quit
Connection closed by foreign host.
$
The lines marked '>>' you type and press enter. Once the connected to
localhost appears enter 'helo' and enter. The server should respond with
version etc. To exit enter 'quit' then enter.
If is not working you are best to check your system log (/var/log/messages)
to locate the reason xinetd is not starting the bdmd server. To debug an
xinetd setup, as root do:
# kill -SIGUSR1 $(pidof xinetd)
# less /var/run/xinetd.dump
The look for the BDM entry and check entry is correct. Here is an
example:
Service = bdm
State = Active
Service configuration: bdm
id = bdm
flags = IPv4
socket_type = stream
Protocol (name,number) = (tcp,6)
port = 6543
Groups = no
Bind = All addresses.
Server = /usr/sbin/bdmd
Server argv = bdmd -n
Only from: All sites
No access: No blocked sites
Logging to syslog. Facility = authpriv, level = info
Log_on_success flags = HOST PID
Log_on_failure flags = HOST USERID
running servers = 1
retry servers = 0
attempts = 0
service fd = 5
Step 4 -- (Optional) Testing the driver.
It a good idea to build and run the test program called `bdm-chk' for
Coldfire processors and 'bdm-cpu32-chk' for CPU32 processors. This will show
the library built correctly, the driver loads and functions, and your
hardware is connected correctly and functioning.
You will need to select the correct device for the Coldfire. The example
below is for the CPU32 interface on LPT1. To test a CPU32 processor do:
$ cd test
$ ./bdm-chk /dev/bdmcpu320
To test a Coldfire processor do:
$ ./bdm-chk /dev/bdmcf0
Note, the number at the end of the device path is the parallel
port number your pod hardware is connected too. The device nodes
start from 0, while the standard PC LPT ports number from 1. This
means '/dev/bdmcf0' will look for a Coldfire processor on LPT1.
For a TBLCF USB pod on Linux you need to set up udev to create a symlink.
The section 'TBLCF USB Support' details how to set up udev. The TBLCF tools
tblcf-show returns the following for a single pod connected to a Linux box:
$ ./tblcf-show
TBLCF Turbo BDM Light ColdFire Show
Found 1 device(s)
1: 001-012
There is one pod and the name is '01-012' and udev links this to
/dev/tblcf3. To run check using this pod:
$ ./bdm-chk /dev/tblcf3
Note, the name will change on Linux if you disconnect the pod and reconnect
it. If want to lock a name down you can use udev.
To test using a BDM server on a remote host call 'foo':
$ /bdm-chk foo:/dev/bdmcpu320
Note, do not use the MSYS rxtv shell to test from. It currently transforms
program arguments and the device path used in these example becomes
something very different.
Step 5 -- Patch your GDB distribution
Step 6 -- Compile and install the cross-GDB with BDM support
These step have been removed. We do not need to patch GDB any more. Use the
m68k-bdm-gdbserver executable with GDB built from the FSF sources.
Please refer to README.bdmgdbserver for instructions on using the BDM GDB
Server.
Step 7 -- (Optional) Install the GDB scripts
$ cd gdbScripts
$ make install
You will have to change the scripts to match your CPU32(+) hardware.
Step 8 -- Build a BDM interface
See the Schematics directory for an example circuit.
Step 7 -- Try it out
This is left as an exercise for the reader.....
INITIALISATION SCRIPTS
======================
The M68K BDM package supports initialisation scripts. The scripts are all
called '.m68kbdminit' and read from 3 locations during the bdmOpen call. The
locations are:
1. The current directory ($PWD)
2. The user's home directory as specified by the "HOME" environment
variable.
3. A user define location as specified by the "M68K_BDM_INIT" environment
variable.
The files are plain text files and are read into a character array on after
another. The '#' is a comment character and line continuation using the '\' at
the end of a line is supported.
The configurations supported are:
dev:
"dev user-name device-name"
A line starting with 'dev' followed by white space defines a device mapping
or renaming. The user-name is the name a user may use to reference a
device. The device-name is the name required by the hardware to access the
device. This can be used to map a difficult USB device name that libusb uses
to a simpler user friendly name. This helps users because the naming of USB
devices vary between host platforms. The device mapping also helps
configuration control of debugging scripts. A common script can reference a
name and each user in a team can place the actual device they use in the a
user specific file in their home directory.
TBLCF USB SUPPORT
=================
The TBLCF is the Turbo BDM Light Coldfire UDB Pod created by Daniel Malik back
in 2006. This is a GPL design for both hardware and software. It uses a small
microcontrolller and firmware in the pod and the open source libusb code to
provide the low level USB support on various hosts.
The supported hosts are Linux, FreeBSD, and Windows. The specifics of the hosts
make the set up different for each. The scripts support helps user isolate
their host specifics. USB device names are helped by the 'dev' entry in the
M68K BDM script files. These entries allow you to make a simpler entry for a
more complex name. Use the' tblcf-show tool' to dump the names of the USB
devices you need to pass to the BDM software. On Linux you may wish to use read
the Linux section and use the udev interface.
The USB support in the BDM package checks the device name against the devices
detected by libusb. Linux is an exception where special code is present to
handle udev created sym-links. The code will partial match the device node
against the libusb detected devices. For example if the libusb device node
found on Windows is 'bus-0-\\.\libusb0-0002-0x0425-0x1001' then you could use
'0002-0x0425-0x1001' to use the device.
If you are a CPU32 user and would like to look at supporting the CPU32
processor with this pod please contact the BDM mailing list.
Linux
-----
The USB pod is simple to support on Linux. Just plug it and check the kernel
messages:
$ dmesg | tail
usb 1-1.2: new low speed USB device using ehci_hcd and address 12
usb 1-1.2: config 1 interface 0 altsetting 0 endpoint 0x82 is Bulk; ...
usb 1-1.2: config 1 interface 0 altsetting 0 endpoint 0x2 is Bulk; ...
usb 1-1.2: configuration #1 chosen from 1 choice
usb 1-1.2: New USB device found, idVendor=0425, idProduct=1001
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=2
usb 1-1.2: Product: Turbo BDM Light ColdFire v0.4
usb 1-1.2: Manufacturer: Freescale
usb 1-1.2: SerialNumber: Turbo BDM Light ColdFire v0.4
You can see the pod has connected with address 12. Run the 'tblcf-show' command
to list the names of the pods as seen by libusb. If you disconnect the pod or
power cycle the pod or system the address of the pod can change. For example a
disconnect then reconnect moves the address onto the next number on my
system. This make it difficult to create scripts that take care of this.
The solution is to use udev. This is a user land system present on current
Linux systems that responds to and manages hot plug kernel events. The
Wikipedia page on udev (http://en.wikipedia.org/wiki/Udev) provide a nice
overview of udev.
Create a udev rule for the TBLCF pod to create a node in the 'dev'
directory. You can customise the node name used to suite your specific
needs. For me I have a single pod on my local Fedora Core 8 workstation and so
a basic setup is all that is needed:
# cat /etc/udev/rules.d/91-tlbcf.rules
SUBSYSTEM=="usb" ATTR{manufacturer}=="Freescale" \
ATTR{idVendor}=="0425" ATTR{idProduct}=="1001" SYMLINK+="tblcf%n"
Note: there is a single line in the actual file.
When I plug in my pod udev creates '/dev/tblcf3'. This is:
# ls -las /dev/tblcf3
0 lrwxrwxrwx 1 root root 15 2008-03-06 14:59 /dev/tblcf3 -> bus/usb/001/012
The USB support for Linux in the BDM package checks if the device node is a
sym-link. If it is the link path is read and checked to see if the prefix is
'bus/usb'. If it is the device is assumed to be a USB device and the trailing
part of the path is the device name returned by libusb. The USB driver will
attempt to open the device. This may fail if the user does not have
permission. In this case the bdmd server on the local host is used. This is
similar to the I/O Permission support.
With udev you can create device nodes with any name that suites. You can also
add more attribute checks to create a specific node. This allows for the
creation of nodes that match the function the pod is performing. In my example
above the number in the dev file is based on the USB port on the work station.
The udev configuration required varys for different types of Linux. Please let
me know of a configuration for your version of Linux and I will add it to the
list.
Windows
-------
Plugging the pod into a Windows machine brings up the standard Hardware found
installer dialog box. I have only done this when an Administrator and I suspect
you will need to be an Administrator because driver files are installed into
the Windows directory.
You need to have the LibUsb-Win32 package unpacked some where on your
machine. Typically you will have done this to build the BDM software and the
package links the libusb library. The BDM package has a axbdm.inf file and you
navigate the Hardware installer to say you have a disk then browse to select
the axbdm.inf file. The installer will then start to install the drivers and if
it cannot find the files it needs it will ask for them. This time navigate to
the location of the LibUsb-Win32 files and select the ones asked for by the
dialog box.
I created the axbdm.inf file for the AxBDM pod from Axiom I have. The
LibUsb-Win32 package contains a program called inf-installer.exe. To use this
program with the pod connected to the computer, run the program then select the
pod and fill in the fields.
Once finished you can run the testlibusb-win.exe and it will show the TBLCF pod
in the list of devices.
Run the tblcf-show program to get a list of detected pods. The returned name is
not pretty but it seems to be unique to pod in a specific USB port. You need to
use this name when using the BDM software:
> chk-bdm bus-0-\\.\libusb0-0002-0x0425-0x1001
It is not a nice name but this is what libusb returns. You can take this name
and place in a .m68kbdminit file to make more user friendly:
dev bus-0-\\.\libusb0-0002-0x0425-0x1001 usb1
On Windows you may need to add a HOME environment variable. You can do this
using the Control Panel's System entry. Open the System entry, select the
Advanced tab, then the Environment Variables button and add to "User Variables"
a "HOME" entry thats points to your home directory. On Windows this is
typically your "My Documents" directory. Once set you can create a .m68kbdminit
file in that directory and the M68K BDM tools will read that file when opening
a BDM device.
When using GDB you need to escape the '\' character. The above device name in
gdb and gdb scripts becomes:
bus-0-\\\\.\\libusb0-0002-0x0425-0x1001
I/O PERM SUPPORT
================
The I/O Permission support is based around the 'ioperm' system call on Linux
and the "/dev/io" I/O port access on FreeBSD. The calls allows a root executed
program direct access to the I/O ports of a PC. Unix programs such as X windows
use this call to gain control of the video card I/O ports without the need for
a driver. The term "ioperm" refers to the ioperm call on Linux and the
"/dev/io" interface on FreeBSD.
The support for the ioperm call has been added to the BDM package because it:
1. Allows a user to build a BDM application without installing kernel
sources.
2. The BDM driver is included in the user land application rather than
the kernel. A kernel upgrade or change does not require the building
of the BDM driver.
3. Binary programs can be created and distributed removing the need for
users to build a driver to use them.
4. Stops the kernel jitter seen when downloading.
The library that BDM applications link to by default now contains the ioperm
call as well as the BDM driver code. If you link the default library to GDB it
will contain the ioperm call. Having an application such as GDB make an ioperm
call will fail unless GDB is executing as root. The ioperm call requires the
program making the call be executing as root and executing GDB as root is not
recommended and is actively discouraged.
The remote protocol that is also built by default into the BDM library provides
an easy means to have GDB executing as a user and the BDM server executing as
root. The BDM server being root can make the ioperm call and gain direct
control of the parallel ports.
To use the ioperm call make sure you install the BDM server. See Step 3 of the
INSTALLATION procedure above.
The ioperm support performs the following when opening the BDM port:
1. Issue the ioperm call. If it passes the direct I/O accessing of the
parallel port is performed.
2. If the ioperm call fails, the kernel driver open is attempted. If
is succeeds the kernel driver is used.
3. If the driver call fails an attempt to connect to a local BDM
server is performed. Therefore if ioperm and driver opens fail the
following check command:
$ ./chk /dev/bdmcf0
is transformed into the equivalent command line command of:
$ ./chk localhost:/dev/bdmcf0
where we are attempting to open LPT1 for a Coldfire target. The
device entry at the end should be changed to suite your specific
parallel port and processor.
A side effect of the current I/O perm implementation is the simulation of
device nodes under the '/dev' tree. This design is copied from the Windows
version of the BDM package. The Windows build is a kind of I/O perm driver
where the GiveIO driver provides the Windows application direct access to the
parallel port rather than the ioperm system call. The simulation of BDM device
nodes under the '/dev' directory is used to keep the documentation consisent,
and to allow GDB scripts or BDM programs a common way to operate on different
platforms. The simulation means you will not find device nodes under a '/dev'
tree. This can be confusing for experienced Unix users accustomed to finding
device nodes in the '/dev' directory.
The I/O perm interface has about the same performance as the kernel
module. This is based on limited testing. The kernel module should be a little
faster for most block read/write operations. This is mostly due to the kernel
being blocked while the bit bashing occurs. If you perform a large number of
small BDM requests the performance will about the same for the ioperm direct
accesses and the kernel driver.
The Library
===========
The library provides a higher level interface to the driver without requiring
you to make low level Linux driver calls.
The library interface consists of two parts:
1) The driver interface, and
2) The remote protocol.
The driver interface make Unix driver calls via the open, close, read, write
and ioctl system calls.
The library also contains the remote protocol that talks to the BDM
server. This protocol is not the GDB remote protocol. It operates at a much
lower level than the GDB remote protocol and is designed to support a server
operating from xinetd or inetd. It also allows flash programming tools built
with the BDM library to work remotely.
The library does not contain the download support anymore. The need to contain
a specific BFD header file is broken. The GDB patch contains the code to
perform a download to target.
Windows 9x,NT,2000
==================
The library will build the driver in one pass. There is no driver needed for
Windows 9x. This should allow GDB to be built. The Cygwin or MinGW packages are
needed to build the library.
I have tested the package on Windows 98, Windows 2000 and Windows XP using
MinGW. This is cross-compiled from Linux and also compiled under MinGW on
Windows XP.
Cygwin should build and work, how-ever at the time of updating this file I
could get Cygwin installed and working to test.
Setting the minor device number
===============================
The minor device number (the second number in the mknod command) specifies
the parallel port to which the BDM interface is connected and the type of
the target CPU. The least signficant two bits of the minor device
number specify the parallel port and the remaining bits specify the target
CPU type:
7 6 5 4 3 2 1 0
+----+----+----+----+----+----+----+----+
| | | | | | | | |
+----+----+----+----+----+----+----+----+
\ / \ /
\ / \ /
\ / \ /
------------+----------- -+-
| |
| |
| +-- These two bits select the parallel
| port to which the BDM interface is
| connected: 00 - LPT1
| 01 - LPT2
| 10 - LPT3
|
+-- These six bits select the target CPU type:
000000 - CPU32+ (PD adaptor)
000001 - Coldfire
000010 - CPU32+ (ICD adaptor)
Examples
========
1. Target processor is a Motorola MC68360 (CPU32+) connected to LPT1.
Minor device number is 0.
2. Target processor is a Motorola MC68360 (CPU32+) connected to LPT2.
Minor device number is 1.
3. Target processor is a Motorola MC5206(e) or MCF5307 (Coldfire) connected
to LPT1. Minor device number is 4.
ACKNOWLEDGEMENTS
================
Thanks very much to Motorola for making the parallel port BDM
interface circuit freely available and to M. Schraut and G. Magin
for providing the Linux driver and gdb modifications that got this
all started.
For the Coldfire additions I would like thank Eric for the clean
driver frame work, and David L Jenkins
(David.l.jenkins@btinternet.com) for the orginal post to the Coldfire
mailing list (ColdFire@WildRice.com) with the pin out and functions
for the P&E interface. It is what started me doing this and a really
great help. David Fiddes must be thanked for the testing and 5307
reset bug. I would also like to thank Dave Morgan of Plessey Asia
Pacific for the use of some test equipment which helped.
Thanks to David McCullough (davidm@stallion.oz.au) for the SCO
support.
ICD fixes from Alexander Aganichev <AAganichev@hypercom.com>.
ICD performace fixed from Keith Outwater <vac4050@cae597.rsc.raytheon.com>.
NT and GiveIO support to Rick Haubenstricker <rickh@perceptron.com>.
Thanks to Sue Cozart and Joe Circello for answering question about
the Coldfire's BDM hardware.
Additional thanks to Freescale for their continued support.
Thanks to Axiom Manufacturing for their support in adding the TBLCF support.
WHERE TO GET HELP
=================
If you've got any questions about any of this, please contact the BDM project
mailing list on the SourceForge web site:
http://sourceforge.net/projects/bdm/
We like to hear any success stories, as well as suggestions for improvements.
Reference in New Issue View Git Blame Copy Permalink