new version after failed try to rearchitect MMU code

where the wrong way round)

.gdbinit

@@ -1,7 +1,8 @@
 #set disassemble-next-line on
 define tr
-	#target remote | m68k-bdm-gdbserver pipe /dev/bdmcf3
-	target remote | m68k-bdm-gdbserver pipe /dev/tblcf3
+	!killall m68k-bdm-gdbserver
+	target remote | m68k-bdm-gdbserver pipe /dev/bdmcf3
+	#target remote | m68k-bdm-gdbserver pipe /dev/tblcf3
 	#target dbug /dev/ttyS0
 	#monitor bdm-reset
 end

BaS_gcc.config

@@ -0,0 +1 @@
+// ADD PREDEFINED MACROS HERE!

BaS_gcc.creator

@@ -0,0 +1 @@
+[General]

BaS_gcc.files

@@ -0,0 +1,231 @@
+dma/dma.c
+dma/MCD_dmaApi.c
+dma/MCD_tasks.c
+dma/MCD_tasksInit.c
+exe/basflash.c
+exe/basflash_start.c
+firebee/bas.elf
+firebee/bas.lk
+firebee/bas.map
+firebee/bas.s19
+firebee/basflash.elf
+firebee/basflash.map
+firebee/basflash.s19
+firebee/bashflash.lk
+firebee/depend
+firebee/libbas.a
+firebee/ram.elf
+firebee/ram.lk
+firebee/ram.map
+firebee/ram.s19
+flash/flash.c
+flash/s19reader.c
+fs/cc932.c
+fs/cc936.c
+fs/cc949.c
+fs/cc950.c
+fs/ccsbcs.c
+fs/ff.c
+fs/unicode.c
+if/driver_vec.c
+include/acia.h
+include/am79c874.h
+include/arp.h
+include/ati_ids.h
+include/bas_printf.h
+include/bas_string.h
+include/bas_types.h
+include/bas_utils.h
+include/bcm5222.h
+include/bootp.h
+include/cache.h
+include/diskio.h
+include/dma.h
+include/driver_mem.h
+include/driver_vec.h
+include/edid.h
+include/ehci.h
+include/eth.h
+include/exceptions.h
+include/fb.h
+include/fec.h
+include/fecbd.h
+include/ff.h
+include/ffconf.h
+include/firebee.h
+include/i2c-algo-bit.h
+include/i2c.h
+include/icmp.h
+include/ikbd.h
+include/interrupts.h
+include/ip.h
+include/m54455.h
+include/m5484l.h
+include/MCD_dma.h
+include/mcd_initiators.h
+include/MCD_progCheck.h
+include/MCD_tasksInit.h
+include/MCF5475.h
+include/MCF5475_CLOCK.h
+include/MCF5475_CTM.h
+include/MCF5475_DMA.h
+include/MCF5475_DSPI.h
+include/MCF5475_EPORT.h
+include/MCF5475_FBCS.h
+include/MCF5475_FEC.h
+include/MCF5475_GPIO.h
+include/MCF5475_GPT.h
+include/MCF5475_I2C.h
+include/MCF5475_INTC.h
+include/MCF5475_MMU.h
+include/MCF5475_PAD.h
+include/MCF5475_PCI.h
+include/MCF5475_PCIARB.h
+include/MCF5475_PSC.h
+include/MCF5475_SDRAMC.h
+include/MCF5475_SEC.h
+include/MCF5475_SIU.h
+include/MCF5475_SLT.h
+include/MCF5475_SRAM.h
+include/MCF5475_USB.h
+include/MCF5475_XLB.h
+include/mmu.h
+include/mod_devicetable.h
+include/nbuf.h
+include/net.h
+include/net_timer.h
+include/nif.h
+include/ohci.h
+include/part.h
+include/pci.h
+include/pci_ids.h
+include/queue.h
+include/radeon_reg.h
+include/radeonfb.h
+include/s19reader.h
+include/screen.h
+include/sd_card.h
+include/startcf.h
+include/sysinit.h
+include/tftp.h
+include/udp.h
+include/usb.h
+include/usb_defs.h
+include/user_io.h
+include/util.h
+include/version.h
+include/videl.h
+include/video.h
+include/wait.h
+include/x86debug.h
+include/x86decode.h
+include/x86emu.h
+include/x86emui.h
+include/x86fpu.h
+include/x86fpu_regs.h
+include/x86ops.h
+include/x86pcibios.h
+include/x86prim_asm.h
+include/x86prim_ops.h
+include/x86regs.h
+include/xhdi_sd.h
+kbd/ikbd.c
+m54455/bas.elf
+m54455/bas.lk
+m54455/bas.map
+m54455/bas.s19
+m54455/basflash.elf
+m54455/basflash.map
+m54455/basflash.s19
+m54455/bashflash.lk
+m54455/depend
+m54455/libbas.a
+m54455/ram.elf
+m54455/ram.lk
+m54455/ram.map
+m54455/ram.s19
+m5484lite/bas.elf
+m5484lite/bas.lk
+m5484lite/bas.map
+m5484lite/bas.s19
+m5484lite/basflash.elf
+m5484lite/basflash.map
+m5484lite/basflash.s19
+m5484lite/bashflash.lk
+m5484lite/depend
+m5484lite/libbas.a
+m5484lite/ram.elf
+m5484lite/ram.lk
+m5484lite/ram.map
+m5484lite/ram.s19
+net/am79c874.c
+net/arp.c
+net/bcm5222.c
+net/bootp.c
+net/fec.c
+net/fecbd.c
+net/ip.c
+net/nbuf.c
+net/net_timer.c
+net/nif.c
+net/queue.c
+net/tftp.c
+net/udp.c
+nutil/s19header
+nutil/s19header.c
+pci/ehci-hcd.c
+pci/ohci-hcd.c
+pci/pci.c
+radeon/radeon_accel.c
+radeon/radeon_base.c
+radeon/radeon_cursor.c
+radeon/radeon_monitor.c
+spi/dspi.c
+spi/mmc.c
+spi/sd_card.c
+sys/BaS.c
+sys/cache.c
+sys/driver_mem.c
+sys/exceptions.S
+sys/fault_vectors.c
+sys/init_fpga.c
+sys/interrupts.c
+sys/mmu.c
+sys/startcf.S
+sys/sysinit.c
+usb/usb.c
+usb/usb_mouse.c
+util/bas_printf.c
+util/bas_string.c
+util/printf_helper.S
+util/wait.c
+video/fbmem.c
+video/fbmodedb.c
+video/fbmon.c
+video/fnt_st_8x16.c
+video/offscreen.c
+video/vdi_fill.c
+video/videl.c
+video/video.c
+x86emu/x86biosemu.c
+x86emu/x86debug.c
+x86emu/x86decode.c
+x86emu/x86fpu.c
+x86emu/x86ops.c
+x86emu/x86ops2.c
+x86emu/x86pcibios.c
+x86emu/x86prim_ops.c
+x86emu/x86sys.c
+xhdi/xhdi_interface.c
+xhdi/xhdi_sd.c
+xhdi/xhdi_vec.S
+bas.lk.in
+bas_firebee.bdm
+bas_m5484.bdm
+basflash.lk.in
+check.bdm
+COPYING
+COPYING.LESSER
+dump.bdm
+mcf5474.gdb
+Makefile

BaS_gcc.includes

@@ -0,0 +1,2 @@
+include
+/usr/m68k-elf/include

Makefile

@@ -15,7 +15,7 @@ ifeq (Y,$(COMPILE_ELF))
 TCPREFIX=m68k-elf-
 EXE=elf
 FORMAT=elf32-m68k
-else 
+else
 TCPREFIX=m68k-atari-mint-
 EXE=s19
 FORMAT=srec
@@ -32,20 +32,21 @@ NATIVECC=gcc
 INCLUDE=-Iinclude
 CFLAGS=-mcpu=5474 \
 		-Wall \
-		-Os \
+		-g3 \
 		-fomit-frame-pointer \
 		-ffreestanding \
 		-fleading-underscore \
 		-Wa,--register-prefix-optional
 CFLAGS_OPTIMIZED = -mcpu=5474 \
 		-Wall \
+		-g3 \
 		-O2 \
 		-fomit-frame-pointer \
 		-ffreestanding \
 		-fleading-underscore \
 		-Wa,--register-prefix-optional
 
-TRGTDIRS= ./firebee ./m5484lite
+TRGTDIRS= ./firebee ./m5484lite ./m54455
 OBJDIRS=$(patsubst %, %/objs,$(TRGTDIRS))
 TOOLDIR=util
 
@@ -135,7 +136,7 @@ CSRCS= \
 	x86pcibios.c \
 	\
 	basflash.c \
-	basflash_start.c 
+	basflash_start.c
 
 
 ASRCS= \
@@ -170,32 +171,35 @@ clean:
 
 # flags for targets
 m5484lite/bas.$(EXE): MACHINE=MACHINE_M5484LITE
+m54455/bas.$(EXE): MACHINE=MACHINE_M54455
 firebee/bas.$(EXE): MACHINE=MACHINE_FIREBEE
 m5484lite/ram.$(EXE): MACHINE=MACHINE_M5484LITE
+m54455/ram.$(EXE): MACHINE=MACHINE_M54455
 firebee/ram.$(EXE): MACHINE=MACHINE_FIREBEE
 m5484lite/basflash.$(EXE): MACHINE=MACHINE_M5484LITE
+m54455/basflash.$(EXE): MACHINE=MACHINE_M54455
 firebee/basflash.$(EXE): MACHINE=MACHINE_FIREBEE
 
 #
 # generate pattern rules for different object files
 #
 define CC_TEMPLATE
-ifeq (firebee,$(1))
-	MACHINE=MACHINE_FIREBEE
-else
-	MACHINE=MACHINE_M5484LITE
-endif
+#ifeq (firebee,$(1))
+	#MACHINE=MACHINE_FIREBEE
+#else
+	#MACHINE=MACHINE_M5484LITE
+#endif
 
 # always optimize x86 emulator objects
-$(1)/objs/x86decode.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86sys.o:		CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86debug.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86prim_ops.o:CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86ops.o:		CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86ops2.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86fpu.o:		CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86biosemu.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
-$(1)/objs/x86pcibios.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86decode.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86sys.o:		CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86debug.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86prim_ops.o:CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86ops.o:		CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86ops2.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86fpu.o:		CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86biosemu.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
+#$(1)/objs/x86pcibios.o:	CFLAGS=$(CFLAGS_OPTIMIZED)
 
 $(1)/objs/%.o:%.c
 	$(CC) $$(CFLAGS) -D$$(MACHINE) $(INCLUDE) -c $$< -o $$@
@@ -257,7 +261,7 @@ endif
 $(1)_MAPFILE_RAM=$(1)/$$(basename $$(RAM_EXEC)).map
 $(1)/$$(RAM_EXEC): $(1)/$(LIBBAS) $(LDCSRC)
 	$(CPP) $(INCLUDE) -DCOMPILE_RAM -DOBJDIR=$(1)/objs -P -DFORMAT_ELF=$(FORMAT_ELF) -D$$(MACHINE) $(LDCSRC) -o $(1)/$$(LDRFILE)
-	$(LD) --oformat $$(FORMAT) -Map $$($(1)_MAPFILE_RAM) --cref -T $(1)/$$(LDRFILE) -o $$@
+	$(LD) -g --oformat $$(FORMAT) -Map $$($(1)_MAPFILE_RAM) --cref -T $(1)/$$(LDRFILE) -o $$@
 ifeq ($(COMPILE_ELF),Y)
 	$(OBJCOPY) -O srec $$@ $$(basename $$@).s19
 else
@@ -280,21 +284,21 @@ $(foreach DIR,$(TRGTDIRS),$(eval $(call EX_TEMPLATE,$(DIR))))
 
 indent: $(CSRCS)
 	indent $<
-	
+
 .PHONY: tags
 tags:
 	ctags $(patsubst %,%/*,$(VPATH))
-	
+
 .PHONY: printvars
 printvars:
 	@$(foreach V,$(.VARIABLES), $(if $(filter-out environment% default automatic, $(origin $V)),$(warning $V=$($V))))
 ifeq (MACHINE_M5484LITE,$$(MACHINE))
 	MNAME=m5484lite
 else ifeq (MACHINE_FIREBEE,$(MACHINE))
-   	MNAME=firebee
+	MNAME=firebee
 endif
 
 tools:
-	$(NATIVECC) $(INCLUDE) -c $(TOOLDIR)/s19header.c -o $(TOOLDIR)/s19header.o 
+	$(NATIVECC) $(INCLUDE) -c $(TOOLDIR)/s19header.c -o $(TOOLDIR)/s19header.o
 	$(NATIVECC) -o $(TOOLDIR)/s19header $(TOOLDIR)/s19header.o
 

bas.lk.in

@@ -1,9 +1,11 @@
-#ifdef MACHINE_FIREBEE
+#if defined(MACHINE_FIREBEE)
 #include "firebee.h"
-#endif /* MACHINE_FIREBEE */
-
-#ifdef MACHINE_M5484LITE
+#elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
+#else
+#error "unknown machine!"
 #endif /* MACHINE_M5484LITE */
 
 /* make bas_rom access flags rx if compiling to RAM */
@@ -177,6 +179,7 @@ SECTIONS
 #else
 	__FASTRAM_END			= TARGET_ADDRESS;
 #endif
+	__FASTRAM_SIZE			= __FASTRAM_END - __FASTRAM;
 
 	/* Init CS0 (BootFLASH @ E000_0000 - E07F_FFFF 8Mbytes) */
 	___BOOT_FLASH           = BOOTFLASH_BASE_ADDRESS;

dma/dma.c

@@ -29,13 +29,17 @@
 #include "cache.h"
 #include "exceptions.h"
 
-#if MACHINE_FIREBEE
+#if defined(MACHINE_FIREBEE)
 #include "firebee.h"
-#elif MACHINE_M5484LITE
+#elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
+#else
+#error "unknown machine!"
 #endif /* MACHINE_FIREBEE */
 
-//#define DBG_DMA
+#define DBG_DMA
 #ifdef DBG_DMA
 #define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
 #else
@@ -592,11 +596,15 @@ int dma_interrupt_handler(void *arg1, void *arg2)
 void *dma_memcpy(void *dst, void *src, size_t n)
 {
 	int ret;
-	volatile int32_t time;
-	volatile int32_t start;
-	volatile int32_t end;
+
+#ifdef DBG_DMA
+    int32_t time;
+    int32_t start;
+    int32_t end;
 
 	start = MCF_SLT0_SCNT;
+#endif /* DBG_DMA */
+
 	ret = MCD_startDma(1, src, 4, dst, 4, n, 4, DMA_ALWAYS, 0, MCD_SINGLE_DMA, 0);
 	if (ret == MCD_OK)
 	{
@@ -640,8 +648,10 @@ void *dma_memcpy(void *dst, void *src, size_t n)
 #endif
 	} while (ret != MCD_DONE);
 
+#ifdef DBG_DMA
 	end = MCF_SLT0_SCNT;
 	time = (start - end) / (SYSCLK / 1000) / 1000;
+#endif /* DBG_DMA */
 	dbg("%s: took %d ms (%f Mbytes/second)\r\n", __FUNCTION__, time, n / (float) time / 1000.0);
 
 	return dst;

flash/s19reader.c

@@ -340,6 +340,17 @@ static err_t verify(uint8_t *dst, uint8_t *src, uint32_t length)
 	return OK;
 }
 
+/*
+ * needed to avoid missing type cast warning below
+ */
+static inline err_t srec_memcpy(uint8_t *dst, uint8_t *src, size_t n)
+{
+    err_t e = OK;
+
+    memcpy((void *) dst, (void *) src, n);
+    return e;
+}
+
 void srec_execute(char *flasher_filename)
 {
 	DRESULT res;
@@ -372,7 +383,7 @@ void srec_execute(char *flasher_filename)
 				{
 					/* next pass: copy data to destination */
 					xprintf("OK.\r\ncopy/flash data: ");
-					err = read_srecords(flasher_filename, &start_address, &length, memcpy);
+                    err = read_srecords(flasher_filename, &start_address, &length, srec_memcpy);
 					if (err == OK)
 					{
 						/* next pass: verify data */

if/driver_vec.c

@@ -47,8 +47,8 @@ static struct xhdi_driver_interface xhdi_call_interface =
 static struct dma_driver_interface dma_interface =
 {
 	.version = 0x0101,
-	.magic = 'DMAC',
-	.dma_set_initiator = &dma_set_initiator,
+	.magic = 0x444d4143, 						/* 'DMAC' */
+	.dma_set_initiator = dma_set_initiator,
 	.dma_get_initiator = dma_get_initiator,
 	.dma_free_initiator = dma_free_initiator,
 	.dma_set_channel = dma_set_channel,

include/bas_string.h

@@ -35,6 +35,7 @@ extern char *strncat(char *dst, const char *src, size_t max);
 extern int atoi(const char *c);
 extern void *memcpy(void *dst, const void *src, size_t n);
 extern void *memset(void *s, int c, size_t n);
+extern int memcmp(const void *s1, const void *s2, size_t max);
 extern void bzero(void *s, size_t n);
 
 #define isdigit(c)	(((c) >= '0') && ((c) <= '9'))

include/driver_vec.h

@@ -50,17 +50,17 @@ struct dma_driver_interface
 {
 	int32_t version;
 	int32_t magic;
-	int32_t (*dma_set_initiator)(int32_t initiator);
-	uint32_t (*dma_get_initiator)(int32_t requestor);
-	void (*dma_free_initiator)(int32_t requestor);
-	int32_t (*dma_set_channel)(int32_t requestor, void (*handler)(void));
-	int32_t (*dma_get_channel)(int32_t requestor);
-	void (*dma_free_channel)(int32_t requestor);
-	void (*dma_clear_channel)(int32_t channel);
-	int32_t (*MCD_startDma)(long channel,
-						int8_t *srcAddr, uint32_t srcIncr, int8_t *destAddr, uint32_t destIncr,
-						uint32_t dmaSize, uint32_t xferSize, uint32_t initiator, int32_t priority,
-						uint32_t flags, uint32_t funcDesc);
+	int (*dma_set_initiator)(int initiator);
+	uint32_t (*dma_get_initiator)(int requestor);
+	void (*dma_free_initiator)(int requestor);
+	int (*dma_set_channel)(int requestor, void (*handler)(void));
+	int (*dma_get_channel)(int requestor);
+	void (*dma_free_channel)(int requestor);
+	void (*dma_clear_channel)(int channel);
+	int (*MCD_startDma)(long channel,
+						int8_t *srcAddr, unsigned int srcIncr, int8_t *destAddr, unsigned int destIncr,
+						unsigned int dmaSize, unsigned int xferSize, unsigned int initiator, int priority,
+						unsigned int flags, unsigned int funcDesc);
 	int32_t (*MCD_dmaStatus)(int32_t channel);
 	int32_t (*MCD_XferProgrQuery)(int32_t channel, MCD_XferProg *progRep);
 	int32_t (*MCD_killDma)(int32_t channel);

include/firebee.h

@@ -27,7 +27,7 @@
  *      Author: Markus Fröschle
  */
 
-#define SYSCLK			132000
+#define SYSCLK			132000		/* NOTE: 132 _is_ correct. 133 _is_ wrong. Do not change! */
 
 #define BOOTFLASH_BASE_ADDRESS		0xE0000000
 #define BOOTFLASH_SIZE				0x800000		/* FireBee has 8 MByte Flash */

include/interrupts.h

@@ -79,11 +79,11 @@
 #define	INT_SOURCE_GPT0				62	// GPT0 timer interrupt
 
 
-#define FEC0_INTC_LVL	5			/* interrupt level for FEC0 */
-#define FEC0_INTC_PRI	7			/* interrupt priority for FEC0 */
+#define FEC0_INTC_LVL	1			/* interrupt level for FEC0 */
+#define FEC0_INTC_PRI	2			/* interrupt priority for FEC0 */
 
-#define FEC1_INTC_LVL	5			/* interrupt level for FEC1 */
-#define FEC1_INTC_PRI	7			/* interrupt priority for FEC1 */
+#define FEC1_INTC_LVL	1			/* interrupt level for FEC1 */
+#define FEC1_INTC_PRI	2			/* interrupt priority for FEC1 */
 
 #define FEC_INTC_LVL(x)		((x == 0) ? FEC0_INTC_LVL : FEC1_INTC_LVL)
 #define FEC_INTC_PRI(x)		((x == 0) ? FEC0_INTC_PRI : FEC1_INTC_PRI)
@@ -101,7 +101,7 @@ extern int register_interrupt_handler(uint8_t source, uint8_t level, uint8_t pri
 #define ISR_USER_ISR 	0x02
 
 extern void isr_init(void);
-extern int isr_register_handler(int type, int vector, int (*handler)(void *, void *), void *hdev, void *harg);
-extern void isr_remove_handler(int type ,int (*handler)(void *, void *));
+extern int isr_register_handler(int vector, int (*handler)(void *, void *), void *hdev, void *harg);
+extern void isr_remove_handler(int (*handler)(void *, void *));
 extern bool isr_execute_handler(int vector);
 #endif /* _INTERRUPTS_H_ */

include/ip.h

@@ -9,7 +9,6 @@
 #ifndef _IP_H
 #define _IP_H
 
-/********************************************************************/
 
 /* 32-bit IP Addresses */
 typedef uint8_t IP_ADDR[4];
@@ -57,7 +56,6 @@ typedef struct
 #define IP_HDR_OFFSET   ETH_HDR_LEN
 #define IP_HDR_SIZE     20  /* no options */
 
-/********************************************************************/
 
 typedef struct
 {
@@ -71,7 +69,6 @@ typedef struct
 	unsigned int    err;
 } IP_INFO;
 
-/********************************************************************/
 
 extern void ip_handler(NIF *nif, NBUF *nbf);
 uint16_t ip_chksum(uint16_t *data, int num);

include/m54455.h

@@ -0,0 +1,49 @@
+#ifndef _M54455_H_
+#define _M54455_H_
+
+/*
+ * m54455.h
+ *
+ * preprocessor definitions for the M54455 Freescale machine. This file should contain nothing but preprocessor
+ * definition that evaluate to numbers. It is intended for use in C sources as well as in linker control
+ * files, so care must be taken to not break the syntax of either one.
+ * 
+ * This file is part of BaS_gcc.
+ *
+ * BaS_gcc is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * BaS_gcc is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with BaS_gcc.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ *  Created on: 26.02.2013
+ *      Author: Markus Fröschle
+ */
+
+#define SYSCLK			133000
+
+#define BOOTFLASH_BASE_ADDRESS		0xe0000000
+#define BOOTFLASH_SIZE				0x800000
+#define BOOTFLASH_BAM				(BOOTFLASH_SIZE - 1)
+
+#define SDRAM_START					0x00000000	/* start at address 0 */
+#define SDRAM_SIZE					0x8000000
+
+#ifdef COMPILE_RAM
+#define TARGET_ADDRESS	(SDRAM_START + SDRAM_SIZE - 0x200000)
+#else
+#define TARGET_ADDRESS	BOOTFLASH_BASE_ADDRESS
+#endif /* COMPILE_RAM */
+
+#define DRIVER_MEM_BUFFER_SIZE	0x100000
+
+#define EMUTOS_BASE_ADDRESS 	0xe0100000
+
+#endif /* _M54455_H_ */

include/mmu.h

@@ -26,8 +26,67 @@
 
 #include "bas_types.h"
 
+/*
+ * ACR register handling macros
+ */
+#define ACR_BA(x)                   ((x) & 0xffff0000)
+#define ACR_ADMSK(x)                (((x) & 0xffff) << 16)
+#define ACR_E(x)                    (((x) & 1) << 15)
+
+#define ACR_S(x)                    (((x) & 3) << 13)
+#define ACR_S_USERMODE              0
+#define ACR_S_SUPERVISOR_MODE       1
+#define ACR_S_ALL                   2
+
+#define ACR_ADDRESS_MASK_MODE(x)	(((x) & 1) << 10)
+
+#define ACR_CACHE_MODE(x)			(((x) & 3) << 5)
+#define ACR_SUPERVISOR_PROTECT(x)	(((x) & 1) << 3)
+#define ACR_WRITE_PROTECT(x)		(((x) & 1) << 2)
+
+
+/*
+ * MMU register handling macros
+ */
+
 #define SCA_PAGE_ID		6	/* indicates video memory page */
 
+/*
+ * MMU page sizes
+ */
+#define MMU_PAGE_SIZE_1M	0
+#define MMU_PAGE_SIZE_4K	1
+#define MMU_PAGE_SIZE_8K	2
+#define MMU_PAGE_SIZE_1K	3
+
+/*
+ * cache modes
+ */
+#define CACHE_WRITETHROUGH		0
+#define CACHE_COPYBACK			1
+#define CACHE_NOCACHE_PRECISE	2
+#define CACHE_NOCACHE_IMPRECISE	3
+
+
+/*
+ * page flags
+ */
+#define SV_PROTECT				1
+#define SV_USER					0
+
+#define ACCESS_READ		(1 << 0)
+#define	ACCESS_WRITE	(1 << 1)
+#define ACCESS_EXECUTE	(1 << 2)
+
+struct map_flags
+{
+	unsigned cache_mode:2;
+	unsigned protection:1;
+	unsigned page_id:8;
+	unsigned access:3;
+	unsigned unused:18;
+};
+
 /*
  * global variables from linker script
  */
@@ -35,6 +94,6 @@ extern long video_tlb;
 extern long video_sbt;
 
 extern void mmu_init(void);
-extern void mmutr_miss(uint32_t addresss);
+extern void mmu_map_page(uint32_t virt, uint32_t phys, uint32_t map_size, struct map_flags flags);
 
 #endif /* _MMU_H_ */

include/sysinit.h

@@ -28,13 +28,17 @@
 #ifndef __SYSINIT_H__
 #define __SYSINIT_H__
 
+#include <stdbool.h>
+
 /* function(s) from init_fpga.c */
-extern void init_fpga(void);
+extern bool init_fpga(void);
 extern void init_usb(void);
 
 /* fault_vectors */
 extern void setup_vectors(void);
 
+extern bool fpga_configured;
+
 #endif /* __SYSINIT_H__ */
 
 

include/util.h

@@ -145,7 +145,7 @@ __extension__                             \
 __extension__                                      \
 ({__asm__ volatile ("lea     -60(sp),sp\n\t"       \
                     "movem.l d0-d7/a0-a6,(sp)");   \
-  ((void (*)(void))addr)();                        \
+  ((void (*) (void)) addr)();                      \
   __asm__ volatile ("movem.l (sp),d0-d7/a0-a6\n\t" \
                     "lea     60(sp),sp");          \
 })

include/version.h

@@ -29,7 +29,7 @@
  */
 
 #define MAJOR_VERSION	0
-#define MINOR_VERSION	83
+#define MINOR_VERSION	85
 
 
 #endif /* VERSION_H_ */

include/wait.h

@@ -29,55 +29,23 @@
 
 #include <bas_types.h>
 
-#if MACHINE_FIREBEE
+#if defined(MACHINE_FIREBEE)
 #include "firebee.h"
-#elif MACHINE_M5484LITE
+#elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
+#else
+#error "unknown machine"
 #endif /* MACHINE_FIREBEE */
 
 #include "MCF5475.h"
 
 typedef bool (*checker_func)(void);
 
-extern __inline__ void wait(uint32_t) __attribute__((always_inline));
-extern __inline__ bool waitfor(uint32_t us, checker_func condition) __attribute__((always_inline));
+extern void wait(uint32_t);
+extern bool waitfor(uint32_t us, checker_func condition);
+extern uint32_t get_timer(void);
+extern void wait_ms(uint32_t ms);
 
-extern __inline__ uint32_t get_timer(void)
-{
-	return MCF_SLT_SCNT(0);
-}
-/*
- * wait for the specified number of us on slice timer 0. Replaces the original routines that had
- * the number of useconds to wait for hardcoded in their name.
- */
-extern __inline__ void wait(uint32_t us)
-{
-	int32_t target = MCF_SLT_SCNT(0) - (us * (SYSCLK / 1000));
-
-	while (MCF_SLT_SCNT(0) - target > 0);
-}
-
-/*
- * same as above, but with milliseconds wait time
- */
-extern __inline__ void wait_ms(uint32_t ms)
-{
-	wait(ms * 1000);
-}
-/*
- * the same as above, with a checker function which gets called while
- * busy waiting and allows for an early return if it returns true
- */
-extern __inline__ bool waitfor(uint32_t us, checker_func condition)
-{
-	int32_t target = MCF_SLT_SCNT(0) - (us * (SYSCLK / 1000));
-	bool res;
-
-	do
-	{
-		if ((res = (*condition)()))
-			return res;
-	} while (MCF_SLT_SCNT(0) - target > 0);
-	return false;
-}
 #endif /* _WAIT_H_ */

kbd/ikbd.c

@@ -40,276 +40,300 @@ static unsigned char tx_queue[QUEUE_LEN];
 static unsigned char wptr = 0, rptr = 0;
 
 // structure to keep track of ikbd state
-static struct {
-  unsigned char cmd;
-  unsigned char state;
-  unsigned char expect;
+static struct
+{
+    unsigned char cmd;
+    unsigned char state;
+    unsigned char expect;
 
-  // joystick state
-  unsigned char joystick[2];
+    // joystick state
+    unsigned char joystick[2];
 
-  // mouse state
-  unsigned short mouse_pos_x, mouse_pos_y;
-  unsigned char mouse_buttons;
+    // mouse state
+    unsigned short mouse_pos_x, mouse_pos_y;
+    unsigned char mouse_buttons;
 } ikbd;
 
 // #define IKBD_DEBUG
 
-void ikbd_init() {
-  // reset ikbd state
-  memset(&ikbd, 0, sizeof(ikbd));
-  ikbd.state = IKBD_DEFAULT;
+void ikbd_init()
+{
+    // reset ikbd state
+    memset(&ikbd, 0, sizeof(ikbd));
+    ikbd.state = IKBD_DEFAULT;
 }
 
-static void enqueue(unsigned char b) {
-  if(((wptr + 1)&(QUEUE_LEN-1)) == rptr) {
-    xprintf("IKBD: !!!!!!! tx queue overflow !!!!!!!!!\n");
-    return;
-  }
+static void enqueue(unsigned char b)
+{
+    if (((wptr + 1)&(QUEUE_LEN-1)) == rptr)
+    {
+        xprintf("IKBD: !!!!!!! tx queue overflow !!!!!!!!!\n");
+        return;
+    }
 
-  tx_queue[wptr] = b;
-  wptr = (wptr+1)&(QUEUE_LEN-1);
+    tx_queue[wptr] = b;
+    wptr = (wptr + 1) & (QUEUE_LEN - 1);
 }
 
 // convert internal joystick format into atari ikbd format
-static unsigned char joystick_map2ikbd(unsigned in) {
-  unsigned char out = 0;
+static unsigned char joystick_map2ikbd(unsigned in)
+{
+    unsigned char out = 0;
 
-  if(in & JOY_UP)    out |= 0x01;
-  if(in & JOY_DOWN)  out |= 0x02;
-  if(in & JOY_LEFT)  out |= 0x04;
-  if(in & JOY_RIGHT) out |= 0x08;
-  if(in & JOY_BTN1)  out |= 0x80;
+    if (in & JOY_UP)    out |= 0x01;
+    if (in & JOY_DOWN)  out |= 0x02;
+    if (in & JOY_LEFT)  out |= 0x04;
+    if (in & JOY_RIGHT) out |= 0x08;
+    if (in & JOY_BTN1)  out |= 0x80;
 
-  return out;
+    return out;
 }
 
 // process inout from atari core into ikbd
-void ikbd_handle_input(unsigned char cmd) {
-  // expecting a second byte for command
-  if(ikbd.expect) {
-    ikbd.expect--;
+void ikbd_handle_input(unsigned char cmd)
+{
+    // expecting a second byte for command
+    if (ikbd.expect)
+    {
+        ikbd.expect--;
 
-    // last byte of command received
-    if(!ikbd.expect) {
-      switch(ikbd.cmd) {
-      case 0x07: // set mouse button action
-        xprintf("IKBD: mouse button action = %x\n", cmd);
+        // last byte of command received
+        if (!ikbd.expect)
+        {
+            switch(ikbd.cmd)
+            {
+                case 0x07: // set mouse button action
+                    xprintf("IKBD: mouse button action = %x\n", cmd);
 
-        // bit 2: Mouse buttons act like keys (LEFT=0x74 & RIGHT=0x75)
-        if(cmd & 0x04) ikbd.state |=  IKBD_STATE_MOUSE_BUTTON_AS_KEY;
-        else           ikbd.state &= ~IKBD_STATE_MOUSE_BUTTON_AS_KEY;
+                    // bit 2: Mouse buttons act like keys (LEFT=0x74 & RIGHT=0x75)
+                    if(cmd & 0x04) ikbd.state |=  IKBD_STATE_MOUSE_BUTTON_AS_KEY;
+                    else           ikbd.state &= ~IKBD_STATE_MOUSE_BUTTON_AS_KEY;
 
-        break;
+                    break;
 
-      case 0x80: // ibkd reset
-        // reply "everything is ok"
-        enqueue(0xf0);
-        break;
+                case 0x80: // ibkd reset
+                    // reply "everything is ok"
+                    enqueue(0xf0);
+                    break;
 
-      default:
-        break;
-      }
+                default:
+                    break;
+            }
+        }
+
+        return;
     }
 
-    return;
-  }
+    ikbd.cmd = cmd;
 
-  ikbd.cmd = cmd;
+    switch(cmd)
+    {
+        case 0x07:
+            xprintf("IKBD: Set mouse button action");
+            ikbd.expect = 1;
+            break;
 
-  switch(cmd) {
-  case 0x07:
-    xprintf("IKBD: Set mouse button action");
-    ikbd.expect = 1;
-    break;
+        case 0x08:
+            xprintf("IKBD: Set relative mouse positioning");
+            ikbd.state &= ~IKBD_STATE_MOUSE_DISABLED;
+            ikbd.state &= ~IKBD_STATE_MOUSE_ABSOLUTE;
+            break;
 
-  case 0x08:
-    xprintf("IKBD: Set relative mouse positioning");
-    ikbd.state &= ~IKBD_STATE_MOUSE_DISABLED;
-    ikbd.state &= ~IKBD_STATE_MOUSE_ABSOLUTE;
-    break;
+        case 0x09:
+            xprintf("IKBD: Set absolute mouse positioning");
+            ikbd.state &= ~IKBD_STATE_MOUSE_DISABLED;
+            ikbd.state |=  IKBD_STATE_MOUSE_ABSOLUTE;
+            ikbd.expect = 4;
+            break;
 
-  case 0x09:
-    xprintf("IKBD: Set absolute mouse positioning");
-    ikbd.state &= ~IKBD_STATE_MOUSE_DISABLED;
-    ikbd.state |=  IKBD_STATE_MOUSE_ABSOLUTE;
-    ikbd.expect = 4;
-    break;
+        case 0x0b:
+            xprintf("IKBD: Set Mouse threshold");
+            ikbd.expect = 2;
+            break;
 
-  case 0x0b:
-    xprintf("IKBD: Set Mouse threshold");
-    ikbd.expect = 2;
-    break;
+        case 0x0f:
+            xprintf("IKBD: Set Y at bottom");
+            ikbd.state |= IKBD_STATE_MOUSE_Y_BOTTOM;
+            break;
 
-  case 0x0f:
-    xprintf("IKBD: Set Y at bottom");
-    ikbd.state |= IKBD_STATE_MOUSE_Y_BOTTOM;
-    break;
+        case 0x10:
+            xprintf("IKBD: Set Y at top");
+            ikbd.state &= ~IKBD_STATE_MOUSE_Y_BOTTOM;
+            break;
 
-  case 0x10:
-    xprintf("IKBD: Set Y at top");
-    ikbd.state &= ~IKBD_STATE_MOUSE_Y_BOTTOM;
-    break;
+        case 0x12:
+            xprintf("IKBD: Disable mouse");
+            ikbd.state |= IKBD_STATE_MOUSE_DISABLED;
+            break;
 
-  case 0x12:
-    xprintf("IKBD: Disable mouse");
-    ikbd.state |= IKBD_STATE_MOUSE_DISABLED;
-    break;
+        case 0x14:
+            xprintf("IKBD: Set Joystick event reporting");
+            ikbd.state |= IKBD_STATE_JOYSTICK_EVENT_REPORTING;
+            break;
 
-  case 0x14:
-    xprintf("IKBD: Set Joystick event reporting");
-    ikbd.state |= IKBD_STATE_JOYSTICK_EVENT_REPORTING;
-    break;
+        case 0x15:
+            xprintf("IKBD: Set Joystick interrogation mode");
+            ikbd.state &= ~IKBD_STATE_JOYSTICK_EVENT_REPORTING;
+            break;
 
-  case 0x15:
-    xprintf("IKBD: Set Joystick interrogation mode");
-    ikbd.state &= ~IKBD_STATE_JOYSTICK_EVENT_REPORTING;
-    break;
+        case 0x16: // interrogate joystick
+            // send reply
+            enqueue(0xfd);
+            enqueue(joystick_map2ikbd(ikbd.joystick[0]));
+            enqueue(joystick_map2ikbd(ikbd.joystick[1]));
+            break;
 
-  case 0x16: // interrogate joystick
-    // send reply
-    enqueue(0xfd);
-    enqueue(joystick_map2ikbd(ikbd.joystick[0]));
-    enqueue(joystick_map2ikbd(ikbd.joystick[1]));
-    break;
+        case 0x1a:
+            xprintf("IKBD: Disable joysticks");
+            ikbd.state &= ~IKBD_STATE_JOYSTICK_EVENT_REPORTING;
+            break;
 
-  case 0x1a:
-    xprintf("IKBD: Disable joysticks");
-    ikbd.state &= ~IKBD_STATE_JOYSTICK_EVENT_REPORTING;
-    break;
+        case 0x1c:
+            xprintf("IKBD: Interrogate time of day");
 
-  case 0x1c:
-    xprintf("IKBD: Interrogate time of day");
+            enqueue(0xfc);
+            enqueue(0x13);  // year bcd
+            enqueue(0x03);  // month bcd
+            enqueue(0x07);  // day bcd
+            enqueue(0x20);  // hour bcd
+            enqueue(0x58);  // minute bcd
+            enqueue(0x00);  // second bcd
+            break;
 
-    enqueue(0xfc);
-    enqueue(0x13);  // year bcd
-    enqueue(0x03);  // month bcd
-    enqueue(0x07);  // day bcd
-    enqueue(0x20);  // hour bcd
-    enqueue(0x58);  // minute bcd
-    enqueue(0x00);  // second bcd
-    break;
-   
 
-  case 0x80:
-    xprintf("IKBD: Reset");
-    ikbd.expect = 1;
-    ikbd.state = IKBD_DEFAULT;
-    break;
+        case 0x80:
+            xprintf("IKBD: Reset");
+            ikbd.expect = 1;
+            ikbd.state = IKBD_DEFAULT;
+            break;
 
-  default:
-    xprintf("IKBD: unknown command: %x\n", cmd);
-    break;
-  }
+        default:
+            xprintf("IKBD: unknown command: %x\n", cmd);
+            break;
+    }
 }
 
 void ikbd_poll(void) {
-  static int mtimer = 0;
-  if(CheckTimer(mtimer)) {
-    mtimer = GetTimer(10);
-   
-    // check for incoming ikbd data
+    static int mtimer = 0;
+    if (CheckTimer(mtimer))
+    {
+        mtimer = GetTimer(10);
+
+        // check for incoming ikbd data
+        EnableIO();
+        SPI(UIO_IKBD_IN);
+
+        while(SPI(0))
+            ikbd_handle_input(SPI(0));
+
+        DisableIO();
+    }
+
+    // send data from queue if present
+    if(rptr == wptr) return;
+
+    // transmit data from queue
     EnableIO();
-    SPI(UIO_IKBD_IN);
-   
-    while(SPI(0))
-      ikbd_handle_input(SPI(0));
-   
+    SPI(UIO_IKBD_OUT);
+    SPI(tx_queue[rptr]);
     DisableIO();
-  }
 
-  // send data from queue if present
-  if(rptr == wptr) return;
-   
-  // transmit data from queue
-  EnableIO();
-  SPI(UIO_IKBD_OUT);
-  SPI(tx_queue[rptr]);
-  DisableIO();
- 
-  rptr = (rptr+1)&(QUEUE_LEN-1);  
+    rptr = (rptr + 1) & (QUEUE_LEN - 1);
 }
 
-void ikbd_joystick(unsigned char joystick, unsigned char map) {
-  // todo: suppress events for joystick 0 as long as mouse
-  // is enabled?
- 
-  if(ikbd.state & IKBD_STATE_JOYSTICK_EVENT_REPORTING) {
+void ikbd_joystick(unsigned char joystick, unsigned char map)
+{
+    // todo: suppress events for joystick 0 as long as mouse
+    // is enabled?
+
+    if (ikbd.state & IKBD_STATE_JOYSTICK_EVENT_REPORTING)
+    {
 #ifdef IKBD_DEBUG
-    xprintf("IKBD: joy %d %x\n", joystick, map);
+        xprintf("IKBD: joy %d %x\n", joystick, map);
 #endif
 
-    // only report joystick data for joystick 0 if the mouse is disabled
-    if((ikbd.state & IKBD_STATE_MOUSE_DISABLED) || (joystick == 1)) {    
-      enqueue(0xfe + joystick);
-      enqueue(joystick_map2ikbd(map));
+        // only report joystick data for joystick 0 if the mouse is disabled
+        if ((ikbd.state & IKBD_STATE_MOUSE_DISABLED) || (joystick == 1))
+        {
+            enqueue(0xfe + joystick);
+            enqueue(joystick_map2ikbd(map));
+        }
+
+        if (!(ikbd.state & IKBD_STATE_MOUSE_DISABLED))
+        {
+            // the fire button also generates a mouse event if
+            // mouse reporting is enabled
+            if ((map & JOY_BTN1) != (ikbd.joystick[joystick] & JOY_BTN1))
+            {
+                // generate mouse event (ikbd_joystick_buttons is evaluated inside
+                // user_io_mouse)
+                ikbd.joystick[joystick] = map;
+                ikbd_mouse(0, 0, 0);
+            }
+        }
     }
-   
-    if(!(ikbd.state & IKBD_STATE_MOUSE_DISABLED)) {
-      // the fire button also generates a mouse event if
-      // mouse reporting is enabled
-      if((map & JOY_BTN1) != (ikbd.joystick[joystick] & JOY_BTN1)) {
-        // generate mouse event (ikbd_joystick_buttons is evaluated inside
-        // user_io_mouse)
-        ikbd.joystick[joystick] = map;
-        ikbd_mouse(0, 0, 0);
-      }
-    }
-  }
 #ifdef IKBD_DEBUG
-  else
-    xprintf("IKBD: no monitor, drop joy %d %x\n", joystick, map);
+    else
+        xprintf("IKBD: no monitor, drop joy %d %x\n", joystick, map);
 #endif
- 
-  // save state of joystick for interrogation mode
-  ikbd.joystick[joystick] = map;
+
+    // save state of joystick for interrogation mode
+    ikbd.joystick[joystick] = map;
 }
 
-void ikbd_keyboard(unsigned char code) {
+void ikbd_keyboard(unsigned char code)
+{
 #ifdef IKBD_DEBUG
-  xprintf("IKBD: send keycode %x%s\n", code&0x7f, (code&0x80)?" BREAK":"");
+    xprintf("IKBD: send keycode %x%s\n", code&0x7f, (code&0x80)?" BREAK":"");
 #endif
-  enqueue(code);
+    enqueue(code);
 }
 
-void ikbd_mouse(uint8_t b, int8_t x, int8_t y) {
-  if(ikbd.state & IKBD_STATE_MOUSE_DISABLED)
-    return;
+void ikbd_mouse(uint8_t b, int8_t x, int8_t y)
+{
+    if (ikbd.state & IKBD_STATE_MOUSE_DISABLED)
+        return;
 
-  // joystick and mouse buttons are wired together in
-  // atari st
-  b |= (ikbd.joystick[0] & JOY_BTN1)?1:0;
-  b |= (ikbd.joystick[1] & JOY_BTN1)?2:0;
- 
-  static unsigned char b_old = 0;
-  // monitor state of two mouse buttons
-  if(b != b_old) {
-    // check if mouse buttons are supposed to be treated like keys
-    if(ikbd.state & IKBD_STATE_MOUSE_BUTTON_AS_KEY) {
-      // Mouse buttons act like keys (LEFT=0x74 & RIGHT=0x75)
-     
-      // handle left mouse button
-      if((b ^ b_old) & 1) ikbd_keyboard(0x74 | ((b&1)?0x00:0x80));
-      // handle right mouse button
-      if((b ^ b_old) & 2) ikbd_keyboard(0x75 | ((b&2)?0x00:0x80));
+    // joystick and mouse buttons are wired together in
+    // atari st
+    b |= (ikbd.joystick[0] & JOY_BTN1)?1:0;
+    b |= (ikbd.joystick[1] & JOY_BTN1)?2:0;
+
+    static unsigned char b_old = 0;
+    // monitor state of two mouse buttons
+    if (b != b_old)
+    {
+        // check if mouse buttons are supposed to be treated like keys
+        if (ikbd.state & IKBD_STATE_MOUSE_BUTTON_AS_KEY)
+        {
+            // Mouse buttons act like keys (LEFT=0x74 & RIGHT=0x75)
+
+            // handle left mouse button
+            if((b ^ b_old) & 1) ikbd_keyboard(0x74 | ((b&1)?0x00:0x80));
+            // handle right mouse button
+            if((b ^ b_old) & 2) ikbd_keyboard(0x75 | ((b&2)?0x00:0x80));
+        }
+        b_old = b;
     }
-    b_old = b;
-  }
- 
+
 #if 0
-  if(ikbd.state & IKBD_STATE_MOUSE_BUTTON_AS_KEY) {
-    b = 0;
-    // if mouse position is 0/0 quit here
-    if(!x && !y) return;
-  }
+    if(ikbd.state & IKBD_STATE_MOUSE_BUTTON_AS_KEY)
+    {
+        b = 0;
+        // if mouse position is 0/0 quit here
+        if(!x && !y) return;
+    }
 #endif
 
-  if(ikbd.state & IKBD_STATE_MOUSE_ABSOLUTE) {
-  } else {
-    // atari has mouse button bits swapped
-    enqueue(0xf8|((b&1)?2:0)|((b&2)?1:0));
-    enqueue(x);
-    enqueue((ikbd.state & IKBD_STATE_MOUSE_Y_BOTTOM)?-y:y);
-  }
+    if (ikbd.state & IKBD_STATE_MOUSE_ABSOLUTE)
+    {
+    }
+    else
+    {
+        // atari has mouse button bits swapped
+        enqueue(0xf8|((b&1)?2:0)|((b&2)?1:0));
+        enqueue(x);
+        enqueue((ikbd.state & IKBD_STATE_MOUSE_Y_BOTTOM)?-y:y);
+    }
 }
 

mcf5474.gdb

@@ -5,7 +5,7 @@
 define addresses
 set $vbr   = 0x00000000
 #monitor bdm-ctl-set 0x0801 0x00000000
- 
+
 set $mbar  = 0xFF000000
 #monitor bdm-ctl-set 0x0C0F 0xFF000000
 
@@ -22,30 +22,30 @@ end
 
 define setup-dram
 # Init CS0 (BootFLASH @ E000_0000 - E07F_FFFF 8Mbytes)
-set *((long *) 0xFF000500) = 0xE0000000		
-set *((long *) 0xFF000508) = 0x00041180		
-set *((long *) 0xFF000504) = 0x007F0001		
+set *((long *) 0xFF000500) = 0xE0000000
+set *((long *) 0xFF000508) = 0x00041180
+set *((long *) 0xFF000504) = 0x007F0001
 
 # set *((long *) 0xFF00050C) = 0xFFF00000		# ATARI I/O address
 
 # SDRAM Initialization @ 0000_0000 - 1FFF_FFFF 512Mbytes
-set *((long *) 0xFF000004) = 0x000002AA		
-set *((long *) 0xFF000020) = 0x0000001A		
-set *((long *) 0xFF000024) = 0x0800001A		
-set *((long *) 0xFF000028) = 0x1000001A		
-set *((long *) 0xFF00002C) = 0x1800001A		
-set *((long *) 0xFF000108) = 0x73622830		
-set *((long *) 0xFF00010C) = 0x46770000		
+set *((long *) 0xFF000004) = 0x000002AA
+set *((long *) 0xFF000020) = 0x0000001A
+set *((long *) 0xFF000024) = 0x0800001A
+set *((long *) 0xFF000028) = 0x1000001A
+set *((long *) 0xFF00002C) = 0x1800001A
+set *((long *) 0xFF000108) = 0x73622830
+set *((long *) 0xFF00010C) = 0x46770000
 
 
-set *((long *) 0xFF000104) = 0xE10D0002		
-set *((long *) 0xFF000100) = 0x40010000		
-set *((long *) 0xFF000100) = 0x048D0000		
-set *((long *) 0xFF000104) = 0xE10D0002		
-set *((long *) 0xFF000104) = 0xE10D0004		
-set *((long *) 0xFF000104) = 0xE10D0004		
-set *((long *) 0xFF000100) = 0x008D0000		
-set *((long *) 0xFF000104) = 0x710D0F00		
+set *((long *) 0xFF000104) = 0xE10D0002
+set *((long *) 0xFF000100) = 0x40010000
+set *((long *) 0xFF000100) = 0x048D0000
+set *((long *) 0xFF000104) = 0xE10D0002
+set *((long *) 0xFF000104) = 0xE10D0004
+set *((long *) 0xFF000104) = 0xE10D0004
+set *((long *) 0xFF000100) = 0x008D0000
+set *((long *) 0xFF000104) = 0x710D0F00
 end
 
 define cu
@@ -61,6 +61,11 @@ define ib
 	setup-dram
 end
 
+define run
+	continue
+end
+
 tr
 ib
-load
+add-symbol-file ../emutos/emutos2.img 0xe00000
+load firebee/ram.elf

net/am79c874.c

@@ -13,8 +13,10 @@
 #include "firebee.h"
 #elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
 #else
-#error "unknown machine"
+#error "unknown machine!"
 #endif
 
 //#define DBG_AM79
@@ -63,6 +65,7 @@ int am79c874_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duple
 		if (!(settings & MII_AM79C874_CR_RESET))
 			break;
 	}
+
 	if (timeout >= FEC_MII_TIMEOUT)
 	{
 		dbg("%s: PHY reset failed\r\n", __FUNCTION__);
@@ -88,11 +91,14 @@ int am79c874_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duple
 
 	if (timeout >= FEC_MII_TIMEOUT)
 	{
-		dbg("%s: PHY Set the default mode\r\n", __FUNCTION__);
+		dbg("%s: Auto-negotiation failed (timeout). Set default mode (100Mbps, full duplex)\r\n", __FUNCTION__);
 
 		/* Set the default mode (Full duplex, 100 Mbps) */
 		if (!fec_mii_write(fec_ch, phy_addr, MII_AM79C874_CR, MII_AM79C874_CR_100MB | MII_AM79C874_CR_DPLX))
+		{
+			dbg("%s: forced setting 100Mbps/full failed.\r\n", __FUNCTION__);
 			return 0;
+		}
 	}
 
 #ifdef DBG_AM79

net/arp.c

@@ -11,7 +11,7 @@
 #include <stdbool.h>
 #include <stddef.h>
 
-#define DBG_ARP
+//#define DBG_ARP
 #ifdef DBG_ARP
 #define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
 #else

net/bcm5222.c

@@ -18,13 +18,15 @@
 #include "firebee.h"
 #elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
 #else
 #error "Unknown machine!"
 #endif
 
 #define DBG_BCM
 #ifdef DBG_BCM
-#define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
+#define dbg(format, arg...) do { xprintf("DEBUG %s(): " format, __FUNCTION__, ##arg); } while (0)
 #else
 #define dbg(format, arg...) do { ; } while (0)
 #endif /* DBG_BCM */
@@ -53,7 +55,7 @@ int bcm5222_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duplex
 
 	/* Initialize the MII interface */
 	fec_mii_init(fec_ch, SYSCLK / 1000);
-	dbg("%s: PHY reset\r\n", __FUNCTION__);
+    dbg("PHY reset\r\n");
 
 	/* Reset the PHY */
 	if (!fec_mii_write(fec_ch, phy_addr, BCM5222_CTRL, BCM5222_CTRL_RESET | BCM5222_CTRL_ANE))
@@ -69,7 +71,7 @@ int bcm5222_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duplex
 	if(timeout >= FEC_MII_TIMEOUT)
 		return 0;
 
-	dbg("%s: PHY reset OK\r\n", __FUNCTION__);
+    dbg("PHY reset OK\r\n");
 
 	settings = (BCM5222_AN_ADV_NEXT_PAGE | BCM5222_AN_ADV_PAUSE);
 
@@ -87,13 +89,13 @@ int bcm5222_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duplex
 	if (!fec_mii_write(fec_ch, phy_addr, BCM5222_AN_ADV, settings))
 		return 0;
 
-	dbg("%s: PHY Enable Auto-Negotiation\r\n", __FUNCTION__);
+    dbg("PHY Enable Auto-Negotiation\r\n");
 
 	/* Enable Auto-Negotiation */
 	if (!fec_mii_write(fec_ch, phy_addr, BCM5222_CTRL, (BCM5222_CTRL_ANE | BCM5222_CTRL_RESTART_AN)))
 		return 0;
 
-	dbg("%s: PHY Wait for auto-negotiation to complete\r\n", __FUNCTION__);
+    dbg("PHY Wait for auto-negotiation to complete\r\n");
 
 	/* Wait for auto-negotiation to complete */
 	for (timeout = 0; timeout < FEC_MII_TIMEOUT; timeout++)
@@ -106,7 +108,7 @@ int bcm5222_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duplex
 
 	if (timeout < FEC_MII_TIMEOUT)
 	{
-		dbg("%s: PHY auto-negociation complete\r\n", __FUNCTION__);
+        dbg("PHY auto-negociation complete\r\n");
 
 		/* Read Auxiliary Control/Status Register */
 		if (!fec_mii_read(fec_ch, phy_addr, BCM5222_ACSR, &settings))
@@ -114,7 +116,7 @@ int bcm5222_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duplex
 	}
 	else
 	{
-		dbg("%s: auto negotiation failed, PHY Set the default mode\r\n", __FUNCTION__);
+        dbg("auto negotiation failed, PHY Set the default mode\r\n");
 
 		/* Set the default mode (Full duplex, 100 Mbps) */
 		if (!fec_mii_write(fec_ch, phy_addr, BCM5222_ACSR, settings = (BCM5222_ACSR_100BTX | BCM5222_ACSR_FDX)))
@@ -127,17 +129,17 @@ int bcm5222_init(uint8_t fec_ch, uint8_t phy_addr, uint8_t speed, uint8_t duplex
 	else
 		fec_duplex(fec_ch, FEC_MII_HALF_DUPLEX);
 
-	dbg("%s: PHY Mode: ", __FUNCTION__);
+    dbg("PHY Mode: ");
 
 	if (settings & BCM5222_ACSR_100BTX)
-		dbg("%s: 100Mbps\r\n", __FUNCTION__);
+        dbg("100Mbps\r\n");
 	else
-		dbg("%s: 10Mbps\r\n", __FUNCTION__);
+        dbg("10Mbps\r\n");
 
 	if (settings & BCM5222_ACSR_FDX)
-		dbg("%s: Full-duplex\r\n", __FUNCTION__);
+        dbg("Full-duplex\r\n");
 	else
-		dbg("%s: Half-duplex\r\n", __FUNCTION__);
+        dbg("Half-duplex\r\n");
 
 	return 1;
 }

net/bootp.c

@@ -13,7 +13,7 @@
 
 #define DBG_BOOTP
 #ifdef DBG_BOOTP
-#define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
+#define dbg(format, arg...) do { xprintf("DEBUG: %s(): " format, __FUNCTION__, ##arg); } while (0)
 #else
 #define dbg(format, arg...) do { ; } while (0)
 #endif /* DBG_BOOTP */
@@ -94,7 +94,7 @@ void bootp_handler(NIF *nif, NBUF *nbuf)
 	struct bootp_packet *rx_p;
 	udp_frame_hdr *udpframe;
 
-	dbg("%s\n", __FUNCTION__);
+    dbg("\r\n");
 
 	rx_p = (struct bootp_packet *) &nbuf->data[nbuf->offset];
 	udpframe = (udp_frame_hdr *) &nbuf->data[nbuf->offset - UDP_HDR_SIZE];

net/fec.c

@@ -17,21 +17,24 @@
 #include "bas_string.h"
 #include "bas_printf.h"
 #include "util.h"
+#include "wait.h"
 #include "am79c874.h"
-#include "bcm5222.h"
+//#include "bcm5222.h"
 #include <stdbool.h>
 
 #if defined(MACHINE_FIREBEE)
 #include "firebee.h"
 #elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
 #else
 #error Unknown machine!
 #endif
 
-//#define DBG_FEC
+#define DBG_FEC
 #ifdef DBG_FEC
-#define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
+#define dbg(format, arg...) do { xprintf("DEBUG: %s(): " format, __FUNCTION__, ##arg); } while (0)
 #else
 #define dbg(format, arg...) do { ; } while (0)
 #endif /* DBG_FEC */
@@ -91,11 +94,12 @@ int fec_mii_write(uint8_t ch, uint8_t phy_addr, uint8_t reg_addr, uint16_t data)
 	 */
 	for (timeout = 0; timeout < FEC_MII_TIMEOUT; timeout++)
 	{
+		wait(1);
 		if (MCF_FEC_EIR(ch) & MCF_FEC_EIR_MII)
 			break;
 	}
 
-	if(timeout == FEC_MII_TIMEOUT)
+	if (timeout == FEC_MII_TIMEOUT)
 		return 0;
 
 	/*
@@ -156,11 +160,12 @@ int fec_mii_read(uint8_t ch, uint8_t phy_addr, uint8_t reg_addr, uint16_t *data)
 	 */
 	for (timeout = 0; timeout < FEC_MII_TIMEOUT; timeout++)
 	{
+		wait(1);
 		if (MCF_FEC_EIR(ch) & MCF_FEC_EIR_MII)
 			break;
 	}
 
-	if(timeout == FEC_MII_TIMEOUT)
+	if (timeout == FEC_MII_TIMEOUT)
 		return 0;
 
 	/*
@@ -232,33 +237,33 @@ void fec_log_init(uint8_t ch)
  */
 void fec_log_dump(uint8_t ch)
 {
-	dbg("%s: \r\n   FEC%d Log\r\n", __FUNCTION__, ch);
-	dbg("%s:   ---------------\r\n", __FUNCTION__);
-	dbg("%s: Total: %4d\r\n", __FUNCTION__, fec_log[ch].total);
-	dbg("%s: hberr: %4d\r\n", __FUNCTION__, fec_log[ch].hberr);
-	dbg("%s: babr:  %4d\r\n", __FUNCTION__, fec_log[ch].babr);
-	dbg("%s: babt:  %4d\r\n", __FUNCTION__, fec_log[ch].babt);
-	dbg("%s: gra:   %4d\r\n", __FUNCTION__, fec_log[ch].gra);
-	dbg("%s: txf:   %4d\r\n", __FUNCTION__, fec_log[ch].txf);
-	dbg("%s: mii:   %4d\r\n", __FUNCTION__, fec_log[ch].mii);
-	dbg("%s: lc:    %4d\r\n", __FUNCTION__, fec_log[ch].lc);
-	dbg("%s: rl:    %4d\r\n", __FUNCTION__, fec_log[ch].rl);
-	dbg("%s: xfun:  %4d\r\n", __FUNCTION__, fec_log[ch].xfun);
-	dbg("%s: xferr: %4d\r\n", __FUNCTION__, fec_log[ch].xferr);
-	dbg("%s: rferr: %4d\r\n", __FUNCTION__, fec_log[ch].rferr);
-	dbg("%s: dtxf:  %4d\r\n", __FUNCTION__, fec_log[ch].dtxf);
-	dbg("%s: drxf:  %4d\r\n", __FUNCTION__, fec_log[ch].drxf);
-	dbg("%s: \r\nRFSW:\r\n", __FUNCTION__);
-	dbg("%s: inv:   %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_inv);
-	dbg("%s: m:     %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_m);
-	dbg("%s: bc:    %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_bc);
-	dbg("%s: mc:    %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_mc);
-	dbg("%s: lg:    %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_lg);
-	dbg("%s: no:    %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_no);
-	dbg("%s: cr:    %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_cr);
-	dbg("%s: ov:    %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_ov);
-	dbg("%s: tr:    %4d\r\n", __FUNCTION__, fec_log[ch].rfsw_tr);
-	dbg("%s: ---------------\r\n\r\n", __FUNCTION__);
+    dbg("\r\n   FEC%d Log\r\n", __FUNCTION__, ch);
+    dbg("   ---------------\r\n", __FUNCTION__);
+    dbg(" Total: %4d\r\n", fec_log[ch].total);
+    dbg(" hberr: %4d\r\n", fec_log[ch].hberr);
+    dbg(" babr:  %4d\r\n", fec_log[ch].babr);
+    dbg(" babt:  %4d\r\n", fec_log[ch].babt);
+    dbg(" gra:   %4d\r\n", fec_log[ch].gra);
+    dbg(" txf:   %4d\r\n", fec_log[ch].txf);
+    dbg(" mii:   %4d\r\n", fec_log[ch].mii);
+    dbg(" lc:    %4d\r\n", fec_log[ch].lc);
+    dbg(" rl:    %4d\r\n", fec_log[ch].rl);
+    dbg(" xfun:  %4d\r\n", fec_log[ch].xfun);
+    dbg(" xferr: %4d\r\n", fec_log[ch].xferr);
+    dbg(" rferr: %4d\r\n", fec_log[ch].rferr);
+    dbg(" dtxf:  %4d\r\n", fec_log[ch].dtxf);
+    dbg(" drxf:  %4d\r\n", fec_log[ch].drxf);
+    dbg(" \r\nRFSW:\r\n");
+    dbg(" inv:   %4d\r\n", fec_log[ch].rfsw_inv);
+    dbg(" m:     %4d\r\n", fec_log[ch].rfsw_m);
+    dbg(" bc:    %4d\r\n", fec_log[ch].rfsw_bc);
+    dbg(" mc:    %4d\r\n", fec_log[ch].rfsw_mc);
+    dbg(" lg:    %4d\r\n", fec_log[ch].rfsw_lg);
+    dbg(" no:    %4d\r\n", fec_log[ch].rfsw_no);
+    dbg(" cr:    %4d\r\n", fec_log[ch].rfsw_cr);
+    dbg(" ov:    %4d\r\n", fec_log[ch].rfsw_ov);
+    dbg(" tr:    %4d\r\n", fec_log[ch].rfsw_tr);
+    dbg(" ---------------\r\n\r\n");
 }
 
 /*
@@ -481,9 +486,7 @@ void fec_init(uint8_t ch, uint8_t mode, const uint8_t *pa)
 	 */
 	MCF_FEC_RCR(ch) = 0
 		| MCF_FEC_RCR_MAX_FL(ETH_MAX_FRM)
-//#ifdef FEC_PROMISCUOUS
 		| MCF_FEC_RCR_PROM
-//#endif
 		| MCF_FEC_RCR_FCE;
 
 	if (mode == FEC_MODE_MII)
@@ -541,13 +544,13 @@ void fec_rx_start(uint8_t ch, int8_t *rxbd)
 	 * Make the initiator assignment
 	 */
 	res = dma_set_initiator(DMA_FEC_RX(ch));
-	dbg("%s: dma_set_initiator(DMA_FEC_RX(%d)): %d\r\n", __FUNCTION__, ch, res);
+    dbg("dma_set_initiator(DMA_FEC_RX(%d)): %d\r\n", ch, res);
 
 	/*
 	 * Grab the initiator number
 	 */
 	initiator = dma_get_initiator(DMA_FEC_RX(ch));
-	dbg("%s: dma_get_initiator(DMA_FEC_RX(%d)) = %d\r\n", __FUNCTION__, ch, initiator);
+    dbg("dma_get_initiator(DMA_FEC_RX(%d)) = %d\r\n", ch, initiator);
 
 	/*
 	 * Determine the DMA channel running the task for the
@@ -555,7 +558,7 @@ void fec_rx_start(uint8_t ch, int8_t *rxbd)
 	 */
 	channel = dma_set_channel(DMA_FEC_RX(ch),
 			(ch == 0) ? fec0_rx_frame : fec1_rx_frame);
-	dbg("%s: DMA channel for FEC%1d: %d\r\n", __FUNCTION__, ch, channel);
+    dbg("DMA channel for FEC%1d: %d\r\n", ch, channel);
 
 	/*
 	 * Start the Rx DMA task
@@ -580,7 +583,7 @@ void fec_rx_start(uint8_t ch, int8_t *rxbd)
 			| MCD_NO_CSUM
 			| MCD_NO_BYTE_SWAP
 			);
-	dbg("%s: Rx DMA task for FEC%1d started\r\n", __FUNCTION__, ch);
+    dbg("Rx DMA task for FEC%1d started\r\n", ch);
 }
 
 /*
@@ -604,13 +607,13 @@ void fec_rx_continue(uint8_t ch)
 	 */
 	channel = dma_get_channel(DMA_FEC_RX(ch));
 
-	dbg("%s: RX DMA channel for FEC%1d is %d\r\n", __FUNCTION__, ch, channel);
+    dbg("RX DMA channel for FEC%1d is %d\r\n", ch, channel);
 
 	/*
 	 * Continue/restart the DMA task
 	 */
 	MCD_continDma(channel);
-	dbg("%s: RX dma on channel %d continued\r\n", __FUNCTION__, channel);
+    dbg("RX dma on channel %d continued\r\n", channel);
 }
 
 /*
@@ -668,7 +671,7 @@ void fec_rx_frame(uint8_t ch, NIF *nif)
 	NBUF *cur_nbuf, *new_nbuf;
 	int keep;
 
-	dbg("%s: started\r\n", __FUNCTION__);
+    dbg("started\r\n");
 
 	while ((pRxBD = fecbd_rx_alloc(ch)) != NULL)
 	{
@@ -730,7 +733,7 @@ void fec_rx_frame(uint8_t ch, NIF *nif)
 			new_nbuf = nbuf_alloc();
 			if (new_nbuf == NULL)
 			{
-				dbg("%s: nbuf_alloc() failed\n", __FUNCTION__);
+                dbg("nbuf_alloc() failed\n");
 
 				/*
 				 * Can't allocate a new network buffer, so we
@@ -786,7 +789,7 @@ void fec_rx_frame(uint8_t ch, NIF *nif)
 			else
 			{
 				nbuf_free(cur_nbuf);
-				dbg("%s: got unsupported packet %d, trashed it\r\n", __FUNCTION__, eth_hdr->type);
+                dbg("got unsupported packet %d, trashed it\r\n", eth_hdr->type);
 			}
 		}
 		else 
@@ -850,13 +853,13 @@ void fec_tx_start(uint8_t ch, int8_t *txbd)
 	 * Make the initiator assignment
 	 */
 	res = dma_set_initiator(DMA_FEC_TX(ch));
-	dbg("%s: dma_set_initiator(%d) = %d\r\n", __FUNCTION__, ch, res);
+    dbg("dma_set_initiator(%d) = %d\r\n", ch, res);
 
 	/*
 	 * Grab the initiator number
 	 */
 	initiator = dma_get_initiator(DMA_FEC_TX(ch));
-	dbg("%s: dma_get_initiator(%d) = %d\r\n", __FUNCTION__, ch, initiator);
+    dbg("dma_get_initiator(%d) = %d\r\n", ch, initiator);
 
 
 	/*
@@ -865,7 +868,7 @@ void fec_tx_start(uint8_t ch, int8_t *txbd)
 	 */
 	channel = dma_set_channel(DMA_FEC_TX(ch),
 			(ch == 0) ? fec0_tx_frame : fec1_tx_frame);
-	dbg("%s: dma_set_channel(%d, ...) = %d\r\n", __FUNCTION__, ch, channel);
+    dbg("dma_set_channel(%d, ...) = %d\r\n", ch, channel);
 
 	/*
 	 * Start the Tx DMA task
@@ -890,7 +893,7 @@ void fec_tx_start(uint8_t ch, int8_t *txbd)
 			| MCD_NO_CSUM
 			| MCD_NO_BYTE_SWAP
 			);
-	dbg("%s: DMA tx task started\r\n", __FUNCTION__);
+    dbg("DMA tx task started\r\n");
 }
 
 /*
@@ -913,14 +916,13 @@ void fec_tx_continue(uint8_t ch)
 	 * selected FEC
 	 */
 	channel = dma_get_channel(DMA_FEC_TX(ch));
-	dbg("%s: dma_get_channel(DMA_FEC_TX(%d)) = %d\r\n",
-			__FUNCTION__, ch, channel);
+    dbg("dma_get_channel(DMA_FEC_TX(%d)) = %d\r\n", ch, channel);
 
 	/*
 	 * Continue/restart the DMA task
 	 */
 	MCD_continDma(channel);
-	dbg("%s: DMA TX task continue\r\n", __FUNCTION__);
+    dbg("DMA TX task continue\r\n");
 }
 
 /*
@@ -994,7 +996,7 @@ void fec_tx_frame(uint8_t ch)
 	NBUF *pNbuf;
 	bool is_empty = true;
 
-	dbg("%s:\r\n", __FUNCTION__);
+    dbg("\r\n");
 	while ((pTxBD = fecbd_tx_free(ch)) != NULL)
 	{
 		fec_log[ch].dtxf++;
@@ -1008,7 +1010,7 @@ void fec_tx_frame(uint8_t ch)
 		 * Free up the network buffer that was just transmitted
 		 */
 		nbuf_free(pNbuf);
-		dbg("%s: free buffer %p from TX ring\r\n", __FUNCTION__, pNbuf);
+        dbg("free buffer %p from TX ring\r\n", pNbuf);
 
 		/*
 		 * Re-initialize the Tx BD
@@ -1019,7 +1021,7 @@ void fec_tx_frame(uint8_t ch)
 
 	}    
 	if (is_empty)
-		dbg("%s: transmit queue was empty!\r\n", __FUNCTION__);
+        dbg("transmit queue was empty!\r\n");
 }
 
 void fec0_tx_frame(void)
@@ -1057,8 +1059,8 @@ int fec_send(uint8_t ch, NIF *nif, uint8_t *dst, uint8_t *src, uint16_t type, NB
 	/* Check the length */
 	if ((nbuf->length + ETH_HDR_LEN) > ETH_MTU)
 	{
-		dbg("%s: nbuf->length (%d) + ETH_HDR_LEN (%d) exceeds ETH_MTU (%d)\r\n", 
-				__FUNCTION__, nbuf->length, ETH_HDR_LEN, ETH_MTU);
+        dbg("nbuf->length (%d) + ETH_HDR_LEN (%d) exceeds ETH_MTU (%d)\r\n",
+                nbuf->length, ETH_HDR_LEN, ETH_MTU);
 		return 0;
 	}
 
@@ -1190,7 +1192,7 @@ static void fec_irq_handler(uint8_t ch)
 	event = eir & MCF_FEC_EIMR(ch);
 
 	if (event != eir)
-		dbg("%s: pending but not enabled: 0x%08x\r\n", __FUNCTION__, (event ^ eir));
+        dbg("pending but not enabled: 0x%08x\r\n", (event ^ eir));
 
 	/*
 	 * Clear the event(s) in the EIR immediately
@@ -1201,8 +1203,8 @@ static void fec_irq_handler(uint8_t ch)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].rferr++;
-		dbg("%s: RFERR\r\n", __FUNCTION__);
-		dbg("%s: FECRFSR%d = 0x%08x\r\n", __FUNCTION__, ch, MCF_FEC_FECRFSR(ch));
+        dbg("RFERR\r\n");
+        dbg("FECRFSR%d = 0x%08x\r\n", ch, MCF_FEC_FECRFSR(ch));
 		//fec_eth_stop(ch);
 	}
 
@@ -1210,14 +1212,14 @@ static void fec_irq_handler(uint8_t ch)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].xferr++;
-		dbg("%s: XFERR\r\n", __FUNCTION__);
+        dbg("XFERR\r\n");
 	}
 
 	if (event & MCF_FEC_EIR_XFUN)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].xfun++;
-		dbg("%s: XFUN\r\n", __FUNCTION__);
+        dbg("XFUN\r\n");
 		//fec_eth_stop(ch);
 	}
 
@@ -1225,54 +1227,54 @@ static void fec_irq_handler(uint8_t ch)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].rl++;
-		dbg("%s: RL\r\n", __FUNCTION__);
+        dbg("RL\r\n");
 	}
 
 	if (event & MCF_FEC_EIR_LC)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].lc++;
-		dbg("%s: LC\r\n", __FUNCTION__);
+        dbg("LC\r\n");
 	}
 
 	if (event & MCF_FEC_EIR_MII)
 	{
 		fec_log[ch].mii++;
-		dbg("%s: MII\r\n", __FUNCTION__);
+        dbg("MII\r\n");
 	}
 
 	if (event & MCF_FEC_EIR_TXF)
 	{
 		fec_log[ch].txf++;
-		dbg("%s: TXF\r\n", __FUNCTION__);
+        dbg("TXF\r\n");
 		fec_log_dump(0);
 	}
 
 	if (event & MCF_FEC_EIR_GRA)
 	{
 		fec_log[ch].gra++;
-		dbg("%s: GRA\r\n", __FUNCTION__);
+        dbg("GRA\r\n");
 	}
 
 	if (event & MCF_FEC_EIR_BABT)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].babt++;
-		dbg("%s: BABT\r\n", __FUNCTION__);
+        dbg("BABT\r\n");
 	}
 
 	if (event & MCF_FEC_EIR_BABR)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].babr++;
-		dbg("%s: BABR\r\n", __FUNCTION__);
+        dbg("BABR\r\n");
 	}
 
 	if (event & MCF_FEC_EIR_HBERR)
 	{
 		fec_log[ch].total++;
 		fec_log[ch].hberr++;
-		dbg("%s: HBERR\r\n", __FUNCTION__);
+        dbg("HBERR\r\n");
 	}
 }
 
@@ -1342,9 +1344,9 @@ void fec_eth_setup(uint8_t ch, uint8_t trcvr, uint8_t speed, uint8_t duplex, con
 		 */
 #if defined(MACHINE_FIREBEE)
 		if (am79c874_init(0, 0, speed, duplex))
-			dbg("%s: PHY init completed\r\n", __FUNCTION__);
+            dbg("PHY init completed\r\n");
 		else
-			dbg("%s: PHY init failed\r\n", __FUNCTION__);
+            dbg("PHY init failed\r\n");
 #elif defined(MACHINE_M548X)
 		bcm_5222_init(0, 0, speed, duplex);
 #else
@@ -1397,7 +1399,7 @@ void fec_eth_stop(uint8_t ch)
 	 */
 	level = set_ipl(7);
 
-	dbg("%s: fec %d stopped\r\n", __FUNCTION__, ch);
+    dbg("fec %d stopped\r\n", ch);
 	/*
 	 * Gracefully disable the receiver and transmitter
 	 */

net/fecbd.c

@@ -11,7 +11,7 @@
 #include "bas_printf.h"
 #include <stddef.h>
 
-//#define DBG_FECBD
+#define DBG_FECBD
 #ifdef DBG_FECBD
 #define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
 #else
@@ -31,14 +31,14 @@
  * 
  */
 
-FECBD unaligned_bds[(2 * NRXBD) + (2 * NTXBD) + 1];
+static FECBD unaligned_bds[(2 * NRXBD) + (2 * NTXBD) + 1];
 
 /*
  * These pointers are used to reference into the chunck of data set 
  * aside for buffer descriptors
  */
-FECBD *RxBD;
-FECBD *TxBD;
+static FECBD *RxBD;
+static FECBD *TxBD;
 
 /*
  * Macros to easier access to the BD ring
@@ -65,7 +65,7 @@ void fecbd_init(uint8_t ch)
 	NBUF *nbuf;
 	int i;
 
-	dbg("%s:\r\n", __FUNCTION__);
+    dbg("\r\n");
 
 	/* 
 	 * Align Buffer Descriptors to 4-byte boundary 
@@ -73,7 +73,7 @@ void fecbd_init(uint8_t ch)
 	RxBD = (FECBD *)(((int) unaligned_bds + 3) & 0xFFFFFFFC);
 	TxBD = (FECBD *)((int) RxBD + (sizeof(FECBD) * 2 * NRXBD));
 
-	dbg("%s: initialise RX buffer descriptor ring\r\n", __FUNCTION__);
+    dbg("initialise RX buffer descriptor ring\r\n");
 
 	/* 
 	 * Initialize the Rx Buffer Descriptor ring 
@@ -84,7 +84,7 @@ void fecbd_init(uint8_t ch)
 		nbuf = nbuf_alloc();
 		if (nbuf == NULL)
 		{
-			dbg("%s: could not allocate network buffer\r\n", __FUNCTION__);
+            dbg("could not allocate network buffer\r\n");
 			return;
 		}
 
@@ -102,7 +102,7 @@ void fecbd_init(uint8_t ch)
 	 */
 	RxBD(ch, i - 1).status |= RX_BD_W;
 
-	dbg("%s: initialise TX buffer descriptor ring\r\n", __FUNCTION__);
+    dbg("initialise TX buffer descriptor ring\r\n");
 
 	/* 
 	 * Initialize the Tx Buffer Descriptor ring 

net/ip.c

@@ -7,13 +7,15 @@
  * Modifications:
  */
 #include "net.h"
+#include "bas_printf.h"
+#include "bas_string.h"
 #include <stdint.h>
 #include <stddef.h>
 
 
-//#define IP_DEBUG
+#define IP_DEBUG
 #if defined(IP_DEBUG)
-#define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
+#define dbg(format, arg...) do { xprintf("DEBUG: %s(): " format, __FUNCTION__, ##arg); } while (0)
 #else
 #define dbg(format, arg...) do { ; } while (0)
 #endif
@@ -42,7 +44,7 @@ uint8_t *ip_get_myip(IP_INFO *info)
 	{
 		return (uint8_t *) &info->myip[0];
 	}
-	dbg("%s: info is NULL!\n\t", __FUNCTION__);
+    dbg("info is NULL!\n\t");
 	return 0;
 }
 
@@ -72,9 +74,9 @@ uint8_t *ip_resolve_route(NIF *nif, IP_ADDR_P destip)
 
 	info = nif_get_protocol_info(nif, ETH_FRM_IP);
 
-	if (memcmp(destip, bc) == 0)
+    if (memcmp(destip, bc, 4) == 0)
 	{
-		dbg("%s: destip is broadcast address, no gateway needed\r\n", __FUNCTION__);
+        dbg("destip is broadcast address, no gateway needed\r\n");
 		return destip;
 	}
 
@@ -168,7 +170,7 @@ int ip_send(NIF *nif, uint8_t *dest, uint8_t *src, uint8_t protocol, NBUF *pNbuf
 		route = ip_resolve_route(nif, dest);
 		if (route == NULL)
 		{
-			dbg("%s: Unable to locate %d.%d.%d.%d\r\n", __FUNCTION__,
+            dbg("Unable to locate %d.%d.%d.%d\r\n",
 					dest[0], dest[1], dest[2], dest[3]);
 			return 0;
 		}
@@ -176,9 +178,9 @@ int ip_send(NIF *nif, uint8_t *dest, uint8_t *src, uint8_t protocol, NBUF *pNbuf
 	else
 	{
 		route = bc;
-		dbg("%s: route = broadcast\r\n", __FUNCTION__);
-		dbg("%s: nif = %p\r\n", __FUNCTION__, nif);
-		dbg("%s: nif->send = %p\r\n", __FUNCTION__, nif->send);
+        dbg("route = broadcast\r\n");
+        dbg("nif = %p\r\n", nif);
+        dbg("nif->send = %p\r\n", nif->send);
 	}
 
 	return nif->send(nif, route, &nif->hwa[0], ETH_FRM_IP, pNbuf);
@@ -280,7 +282,7 @@ void ip_handler(NIF *nif, NBUF *pNbuf)
 	 */
 	ip_frame_hdr *ipframe;
 
-	dbg("%s: packet received\r\n", __FUNCTION__);
+    dbg("packet received\r\n");
 
 	ipframe = (ip_frame_hdr *) &pNbuf->data[pNbuf->offset];
 
@@ -289,6 +291,8 @@ void ip_handler(NIF *nif, NBUF *pNbuf)
 	 */
 	if (!validate_ip_hdr(nif, ipframe))
 	{
+        dbg("not a valid IP packet!\r\n");
+		
 		nbuf_free(pNbuf);
 		return;
 	}
@@ -308,6 +312,8 @@ void ip_handler(NIF *nif, NBUF *pNbuf)
 			udp_handler(nif,pNbuf);
 			break;
 		default:
+            dbg("no protocol handler registered for protocol %d\r\n",
+					__FUNCTION__, IP_PROTOCOL(ipframe));
 			nbuf_free(pNbuf);
 			break;
 	}

net/net_timer.c

@@ -24,6 +24,8 @@
 #include "firebee.h"
 #elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
 #else
 #error unknown machine!
 #endif
@@ -152,8 +154,7 @@ bool timer_init(uint8_t ch, uint8_t lvl, uint8_t pri)
 	/*
 	 * Register the timer interrupt handler
 	 */
-	if (!isr_register_handler(ISR_DBUG_ISR, 
-				TIMER_VECTOR(ch), 
+	if (!isr_register_handler(TIMER_VECTOR(ch), 
 				(int (*)(void *,void *)) timer_default_isr,
 				NULL, 
 				(void *) &net_timer[ch])

net/udp.c

@@ -39,6 +39,7 @@ void udp_init(void)
 	for (index = 0; index < UDP_MAX_PORTS; ++index)
 	{
 		udp_port_table[index].port = 0;
+		udp_port_table[index].handler = 0;
 	}
 
 	udp_port = DEFAULT_UDP_PORT;    /* next free port */
@@ -88,7 +89,7 @@ static void *udp_port_handler(uint16_t port)
 	{
 		if (udp_port_table[index].port == port)
 		{
-			return (void *)udp_port_table[index].handler;
+			return (void *) udp_port_table[index].handler;
 		}
 	}
 	return NULL;
@@ -116,7 +117,7 @@ int udp_send(NIF *nif, uint8_t *dest, int sport, int dport, NBUF *pNbuf)
 	}
 
 	/*
-	 * This function takes data and creates a UDP frame and
+	 * This function takes data, creates a UDP frame from it and
 	 * passes it onto the IP layer
 	 */
 	udp_frame_hdr *udpframe;

radeon/radeon_base.c

@@ -74,7 +74,15 @@ extern void run_bios(struct radeonfb_info *rinfo);
 #define MIN_MAPPED_VRAM	(1024*768*4)
 
 #define CHIP_DEF(id, family, flags)					\
-	{ PCI_VENDOR_ID_ATI, id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (flags) | (CHIP_FAMILY_##family) }
+{													\
+	PCI_VENDOR_ID_ATI, 								\
+	id,												\
+	PCI_ANY_ID,										\
+	PCI_ANY_ID,										\
+	0,												\
+	0,												\
+	(flags) | (CHIP_FAMILY_##family)				\
+}
 
 struct pci_device_id radeonfb_pci_table[] = 
 {
@@ -231,7 +239,7 @@ extern struct fb_info *info_fb;
 #define rinfo ((struct radeonfb_info *) info_fb->par)
 static uint32_t inreg(uint32_t addr)
 {
-	return(INREG(addr));
+	return INREG(addr);
 }
 
 static void outreg(uint32_t addr, uint32_t val)
@@ -332,12 +340,10 @@ static int round_div(int num, int den)
 	return(num + (den / 2)) / den;
 }
 
-#ifndef MCF5445X
 static uint32_t read_vline_crnt(struct radeonfb_info *rinfo)
 {
 	return((INREG(CRTC_VLINE_CRNT_VLINE) >> 16) & 0x3FF);
 }
-#endif
 
 static int radeon_map_ROM(struct radeonfb_info *rinfo)
 {
@@ -510,10 +516,12 @@ static int radeon_probe_pll_params(struct radeonfb_info *rinfo)
 
 	hz = US_TO_TIMER(1000000.0) / (double)(stop_tv - start_tv);
 	dbg("%s:hz %d\r\n", __FUNCTION__, (int32_t) hz);
+
 	hTotal = ((INREG(CRTC_H_TOTAL_DISP) & 0x1ff) + 1) * 8;
 	vTotal = ((INREG(CRTC_V_TOTAL_DISP) & 0x3ff) + 1);
 	dbg("%s:hTotal=%d\r\n", __FUNCTION__, hTotal);
 	dbg("%s:vTotal=%d\r\n", __FUNCTION__, vTotal);
+
 	vclk = (double) hTotal * (double) vTotal * hz;
 	dbg("%s:vclk=%d\r\n", __FUNCTION__, (int) vclk);
 
@@ -525,41 +533,52 @@ static int radeon_probe_pll_params(struct radeonfb_info *rinfo)
 			num = 2 * n;
 			denom = 2 * m;
 			break;
+
 		case 2:
 			n = ((INPLL(M_SPLL_REF_FB_DIV) >> 8) & 0xff);
 			m = (INPLL(M_SPLL_REF_FB_DIV) & 0xff);
 			num = 2 * n;
 			denom = 2 * m;
 			break;
+
 		case 0:
 		default:
 			num = 1;
 			denom = 1;
 			break;
 	}
+
 	ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3;
 	radeon_pll_errata_after_index(rinfo);
+
 	n = (INPLL(PPLL_DIV_0 + ppll_div_sel) & 0x7ff);
 	m = (INPLL(PPLL_REF_DIV) & 0x3ff);
+
 	num *= n;
 	denom *= m;
+
 	switch((INPLL(PPLL_DIV_0 + ppll_div_sel) >> 16) & 0x7)
 	{
 		case 1:
 			denom *= 2;
 			break;
+
 		case 2:
 			denom *= 4;
 			break;
+			
 		case 3:
 			denom *= 8;
 			break;
+
 		case 4:
 			denom *= 3;
 			break;
+
 		case 6:
 			denom *= 6;   
 			break;
+
 		case 7:
 			denom *= 12;
 			break;
@@ -567,6 +586,7 @@ static int radeon_probe_pll_params(struct radeonfb_info *rinfo)
 	vclk *= (double) denom;
 	vclk /= (double) (1000 * num);
 	xtal = (int32_t) vclk;
+
 	if ((xtal > 26900) && (xtal < 27100))
 		xtal = 2700;   /* 27 MHz */
 	else if ((xtal > 14200) && (xtal < 14400))
@@ -578,6 +598,7 @@ static int radeon_probe_pll_params(struct radeonfb_info *rinfo)
 		dbg("%s: xtal calculation failed: %d\r\n", __FUNCTION__, xtal);
 		return -1; /* error */
 	}
+
 	tmp = INPLL(M_SPLL_REF_FB_DIV);
 	ref_div = INPLL(PPLL_REF_DIV) & 0x3ff;
 
@@ -619,6 +640,7 @@ static void radeon_get_pllinfo(struct radeonfb_info *rinfo)
 			rinfo->pll.sclk = 23000;
 			rinfo->pll.ref_clk = 2700;
 			break;
+
 		case PCI_DEVICE_ID_ATI_RADEON_QL:
 		case PCI_DEVICE_ID_ATI_RADEON_QN:
 		case PCI_DEVICE_ID_ATI_RADEON_QO:
@@ -630,6 +652,7 @@ static void radeon_get_pllinfo(struct radeonfb_info *rinfo)
 			rinfo->pll.sclk = 27500;
 			rinfo->pll.ref_clk = 2700;
 			break;
+
 		case PCI_DEVICE_ID_ATI_RADEON_Id:
 		case PCI_DEVICE_ID_ATI_RADEON_Ie:
 		case PCI_DEVICE_ID_ATI_RADEON_If:
@@ -640,6 +663,7 @@ static void radeon_get_pllinfo(struct radeonfb_info *rinfo)
 			rinfo->pll.sclk = 25000;
 			rinfo->pll.ref_clk = 2700;
 			break;
+
 		case PCI_DEVICE_ID_ATI_RADEON_ND:
 		case PCI_DEVICE_ID_ATI_RADEON_NE:
 		case PCI_DEVICE_ID_ATI_RADEON_NF:
@@ -650,6 +674,7 @@ static void radeon_get_pllinfo(struct radeonfb_info *rinfo)
 			rinfo->pll.sclk = 27000;
 			rinfo->pll.ref_clk = 2700;
 			break;
+
 		case PCI_DEVICE_ID_ATI_RADEON_QD:
 		case PCI_DEVICE_ID_ATI_RADEON_QE:
 		case PCI_DEVICE_ID_ATI_RADEON_QF:
@@ -690,10 +715,12 @@ static void radeon_get_pllinfo(struct radeonfb_info *rinfo)
 		dbg("%s: Retreived PLL infos from registers\r\n", __FUNCTION__);
 		goto found;
 	}
+
 	/*
 	 * Fall back to already-set defaults...
 	 */
 	dbg("%s: Used default PLL infos\r\n", __FUNCTION__);
+
 found:
 	/*
 	 * Some methods fail to retreive SCLK and MCLK values, we apply default
@@ -707,13 +734,15 @@ found:
 
 	dbg("%s: Reference=%d MHz (RefDiv=0x%x) Memory=%d MHz\r\n", __FUNCTION__,
 			rinfo->pll.ref_clk / 100, rinfo->pll.ref_div, rinfo->pll.mclk / 100);
-	dbg("%s: System=%d MHz PLL min %d, max %d\r\n", __FUNCTION__, rinfo->pll.sclk / 100, rinfo->pll.ppll_min, rinfo->pll.ppll_max);
+	dbg("%s: System=%d MHz PLL min %d, max %d\r\n", __FUNCTION__,
+			rinfo->pll.sclk / 100, rinfo->pll.ppll_min, rinfo->pll.ppll_max);
 }
 
 static int var_to_depth(const struct fb_var_screeninfo *var)
 {
 	if (var->bits_per_pixel != 16)
 		return var->bits_per_pixel;
+
 	return(var->green.length == 5) ? 15 : 16;
 }
 
@@ -723,6 +752,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	struct fb_var_screeninfo v;
 	int nom, den;
 	uint32_t pitch;
+
 	dbg("%s:\r\n", __FUNCTION__);
 
 	/* clocks over 135 MHz have heat isues with DVI on RV100 */
@@ -742,9 +772,11 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		case 0 ... 8:
 			v.bits_per_pixel = 8;
 			break;
+
 		case 9 ... 16:
 			v.bits_per_pixel = 16;
 			break;
+
 #if 0 /* Doesn't seem to work */
 		case 17 ... 24:
 			v.bits_per_pixel = 24;
@@ -753,6 +785,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		case 25 ... 32:
 			v.bits_per_pixel = 32;
 			break;
+
 		default:
 			return -1; //-EINVAL;
 	}
@@ -765,6 +798,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 			v.red.length = v.green.length = v.blue.length = 8;
 			v.transp.offset = v.transp.length = 0;
 			break;
+
 		case 15:
 			nom = 2;
 			den = 1;
@@ -774,6 +808,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 			v.red.length = v.green.length = v.blue.length = 5;
 			v.transp.offset = v.transp.length = 0;
 			break;
+
 		case 16:
 			nom = 2;
 			den = 1;
@@ -785,6 +820,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 			v.blue.length = 5;
 			v.transp.offset = v.transp.length = 0;
 			break;                          
+
 		case 24:
 			nom = 4;
 			den = 1;
@@ -794,6 +830,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 			v.red.length = v.blue.length = v.green.length = 8;
 			v.transp.offset = v.transp.length = 0;
 			break;
+
 		case 32:
 			nom = 4;
 			den = 1;
@@ -804,6 +841,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 			v.transp.offset = 24;
 			v.transp.length = 8;
 			break;
+
     default:
 			dbg("radeonfb: mode %d x %d x %d rejected, color depth invalid\r\n ",
 					var->xres, var->yres, var->bits_per_pixel);
@@ -814,6 +852,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		v.yres_virtual = v.yres;
 	if (v.xres_virtual < v.xres)
 		v.xres_virtual = v.xres;
+
 	/*
 	 * XXX I'm adjusting xres_virtual to the pitch, that may help XFree
 	 * with some panels, though I don't quite like this solution
@@ -848,6 +887,7 @@ int radeonfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	dbg("%s: using mode %d x %d \r\n", __FUNCTION__, v.xres, v.yres);
 
 	memcpy(var, &v, sizeof(v));
+
 	return 0;
 }
 
@@ -857,16 +897,20 @@ int radeonfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 //	DPRINT("radeonfb: radeonfb_pan_display\r\n");
 	if ((var->xoffset + var->xres) > var->xres_virtual)
 		return -1; //-EINVAL;
+
 	if (((var->yoffset * var->xres_virtual) + var->xoffset) >=
 	 (rinfo->mapped_vram - (var->yres * var->xres * (var->bits_per_pixel / 8))))
 		return -1; //-EINVAL;
+
 	if (rinfo->asleep)
 		return 0;
+
 	radeon_wait_for_fifo(rinfo, 2);
 	rinfo->fb_offset = ((var->yoffset * var->xres_virtual + var->xoffset) * var->bits_per_pixel / 8) & ~7;
 	rinfo->dst_pitch_offset = (rinfo->pitch << 22) | ((rinfo->fb_local_base + rinfo->fb_offset) >> 10);
 	OUTREG(CRTC_OFFSET, rinfo->fb_offset);
-  return 0;
+
+	return 0;
 }
 
 short mirror;
@@ -876,6 +920,7 @@ int radeonfb_ioctl(unsigned int cmd, unsigned long arg, struct fb_info *info)
 	struct radeonfb_info *rinfo = info->par;
 	uint32_t tmp;
 	uint32_t value = 0;
+
 	switch(cmd)
 	{
 		/*
@@ -899,6 +944,7 @@ int radeonfb_ioctl(unsigned int cmd, unsigned long arg, struct fb_info *info)
 				tmp &= ~(LVDS_ON | LVDS_BLON);
 			}
 			OUTREG(LVDS_GEN_CNTL, tmp);
+
 			if (value & 0x02)
 			{
 				tmp = INREG(CRTC_EXT_CNTL);
@@ -913,6 +959,7 @@ int radeonfb_ioctl(unsigned int cmd, unsigned long arg, struct fb_info *info)
 			}
 			OUTREG(CRTC_EXT_CNTL, tmp);
 			return 0;
+
 		case FBIO_RADEON_GET_MIRROR:
 			if (!rinfo->is_mobility)
 				return -1; //-EINVAL;
@@ -923,6 +970,7 @@ int radeonfb_ioctl(unsigned int cmd, unsigned long arg, struct fb_info *info)
 			if (CRTC_CRT_ON & tmp)
 				value |= 0x02;
 			return 0;
+
 		default:
 			return -1; //-EINVAL;
 	}
@@ -937,24 +985,30 @@ int32_t radeon_screen_blank(struct radeonfb_info *rinfo, int32_t blank, int32_t
 
 	if (rinfo->lock_blank)
 		return 0;
+
 	dbg("radeonfb: radeon_screen_blank\r\n");
 	radeon_engine_idle();
 	val = INREG(CRTC_EXT_CNTL);
 	val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS | CRTC_VSYNC_DIS);
+
 	switch(blank)
 	{
 		case FB_BLANK_VSYNC_SUSPEND:
 			val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS);
 			break;
+
 		case FB_BLANK_HSYNC_SUSPEND:
 			val |= (CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS);
 			break;
+
 		case FB_BLANK_POWERDOWN:
 			val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS | CRTC_HSYNC_DIS);
 			break;
+
 		case FB_BLANK_NORMAL:
 			val |= CRTC_DISPLAY_DIS;
 			break;
+
 		case FB_BLANK_UNBLANK:
 		default:
 			unblank = 1;
@@ -974,6 +1028,7 @@ int32_t radeon_screen_blank(struct radeonfb_info *rinfo, int32_t blank, int32_t
 				OUTREGP(FP_GEN_CNTL, 0, ~(FP_FPON | FP_TMDS_EN));
 			}
 			break;
+
 		case MT_LCD:
 			rinfo->lvds_timer = 0;
 			val = INREG(LVDS_GEN_CNTL);
@@ -1007,15 +1062,19 @@ int32_t radeon_screen_blank(struct radeonfb_info *rinfo, int32_t blank, int32_t
 				/* We don't do a full switch-off on a simple mode switch */
 				if (mode_switch || blank == FB_BLANK_NORMAL)
 					break;
+
 				/* Asic bug, when turning off LVDS_ON, we have to make sure
 				 * RADEON_PIXCLK_LVDS_ALWAYS_ON bit is off
 				 */
 				tmp_pix_clks = INPLL(PIXCLKS_CNTL);
 				if (rinfo->is_mobility || rinfo->is_IGP)
 					OUTPLLP(PIXCLKS_CNTL, 0, ~PIXCLK_LVDS_ALWAYS_ONb);
+
 				val &= ~(LVDS_BL_MOD_EN);
 				OUTREG(LVDS_GEN_CNTL, val);
+
 				wait(100);
+
 				val &= ~(LVDS_ON | LVDS_EN);
 				OUTREG(LVDS_GEN_CNTL, val);
 				val &= ~LVDS_DIGON;
@@ -1023,6 +1082,7 @@ int32_t radeon_screen_blank(struct radeonfb_info *rinfo, int32_t blank, int32_t
 				rinfo->lvds_timer = (int32_t)rinfo->panel_info.pwr_delay;
 				rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK;
 				rinfo->init_state.lvds_gen_cntl |= val & LVDS_STATE_MASK;
+
 				if (rinfo->is_mobility || rinfo->is_IGP)
 					OUTPLL(PIXCLKS_CNTL, tmp_pix_clks);
 			}
@@ -1039,8 +1099,10 @@ int32_t radeon_screen_blank(struct radeonfb_info *rinfo, int32_t blank, int32_t
 int radeonfb_blank(int blank, struct fb_info *info)
 {
 	struct radeonfb_info *rinfo = info->par;
+
 	if (rinfo->asleep)
 		return 0;
+
 	return radeon_screen_blank(rinfo, blank, 0);
 }
 
@@ -1049,14 +1111,18 @@ static int radeon_setcolreg(unsigned regno, unsigned red, unsigned green,
 {
 	struct radeonfb_info *rinfo = info->par;
 	uint32_t pindex;
+
 	if (regno > 255)
 		return 1;
+
 	red >>= 8;
 	green >>= 8;
 	blue >>= 8;
+
 	rinfo->palette[regno].red = red;
 	rinfo->palette[regno].green = green;
 	rinfo->palette[regno].blue = blue;
+
 	/* default */
 	pindex = regno;
 	if (!rinfo->asleep)
@@ -1069,7 +1135,9 @@ static int radeon_setcolreg(unsigned regno, unsigned red, unsigned green,
 				return 1;
 			if (rinfo->depth == 15 && regno > 31)
 				return 1;
-			/* For 565, the green component is mixed one order
+
+			/*
+			 * For 565, the green component is mixed one order
 			 * below
 			 */
 			if (rinfo->depth == 16)
@@ -1095,6 +1163,7 @@ int radeonfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	struct radeonfb_info *rinfo = info->par;
 	uint32_t dac_cntl2, vclk_cntl = 0;
 	int rc;
+
 	if (!rinfo->asleep)
 	{
 		if (rinfo->is_mobility)
@@ -1102,6 +1171,7 @@ int radeonfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			vclk_cntl = INPLL(VCLK_ECP_CNTL);
 			OUTPLL(VCLK_ECP_CNTL, vclk_cntl & ~PIXCLK_DAC_ALWAYS_ONb);
 		}
+
 		/* Make sure we are on first palette */
 		if (rinfo->has_CRTC2)
 		{
@@ -1113,6 +1183,7 @@ int radeonfb_setcolreg(unsigned regno, unsigned red, unsigned green,
 	rc = radeon_setcolreg(regno, red, green, blue, transp, info);
 	if (!rinfo->asleep && rinfo->is_mobility)
 		OUTPLL(VCLK_ECP_CNTL, vclk_cntl);
+
 	return rc;
 }
 
@@ -1129,6 +1200,7 @@ static void radeon_save_state(struct radeonfb_info *rinfo, struct radeon_regs *s
 	save->crtc_v_sync_strt_wid = INREG(CRTC_V_SYNC_STRT_WID);
 	save->crtc_pitch = INREG(CRTC_PITCH);
 	save->surface_cntl = INREG(SURFACE_CNTL);
+
 	/* FP regs */
 	save->fp_crtc_h_total_disp = INREG(FP_CRTC_H_TOTAL_DISP);
 	save->fp_crtc_v_total_disp = INREG(FP_CRTC_V_TOTAL_DISP);
@@ -1143,6 +1215,7 @@ static void radeon_save_state(struct radeonfb_info *rinfo, struct radeon_regs *s
 	save->tmds_transmitter_cntl = INREG(TMDS_TRANSMITTER_CNTL);
 	save->vclk_ecp_cntl = INPLL(VCLK_ECP_CNTL);
 	/* PLL regs */
+
 	save->clk_cntl_index = INREG(CLOCK_CNTL_INDEX) & ~0x3f;
 	radeon_pll_errata_after_index(rinfo);
 	save->ppll_div_3 = INPLL(PPLL_DIV_3);
@@ -1152,8 +1225,10 @@ static void radeon_save_state(struct radeonfb_info *rinfo, struct radeon_regs *s
 static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs *mode)
 {
 	int i;
+
 	dbg("radeonfb: radeon_write_pll_regs\r\n");
 	radeon_wait_for_fifo(rinfo, 20);
+
 #if 0
 	/* Workaround from XFree */
 	if (rinfo->is_mobility)
@@ -1180,22 +1255,27 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
 		}
 	}
 #endif
+
 	/* Swich VCKL clock input to CPUCLK so it stays fed while PPLL updates*/
 	OUTPLLP(VCLK_ECP_CNTL, VCLK_SRC_SEL_CPUCLK, ~VCLK_SRC_SEL_MASK);
+
 	/* Reset PPLL & enable atomic update */
 	OUTPLLP(PPLL_CNTL, PPLL_RESET | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN,
 	 ~(PPLL_RESET | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN));
+
 	/* Switch to selected PPLL divider */
 	OUTREGP(CLOCK_CNTL_INDEX,	mode->clk_cntl_index & PPLL_DIV_SEL_MASK, ~PPLL_DIV_SEL_MASK);
 	radeon_pll_errata_after_index(rinfo);
 	radeon_pll_errata_after_data(rinfo);
+
 	/* Set PPLL ref. div */
 	if (rinfo->family == CHIP_FAMILY_R300 || rinfo->family == CHIP_FAMILY_RS300
 	 || rinfo->family == CHIP_FAMILY_R350 || rinfo->family == CHIP_FAMILY_RV350)
 	{
 		if (mode->ppll_ref_div & R300_PPLL_REF_DIV_ACC_MASK)
 		{
-			/* When restoring console mode, use saved PPLL_REF_DIV
+			/*
+			 * When restoring console mode, use saved PPLL_REF_DIV
 			 * setting.
 			 */
 			OUTPLLP(PPLL_REF_DIV, mode->ppll_ref_div, 0);
@@ -1216,17 +1296,22 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg
 	/* Write update */
 	while (INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R);
 	OUTPLLP(PPLL_REF_DIV, PPLL_ATOMIC_UPDATE_W, ~PPLL_ATOMIC_UPDATE_W);
+
 	/* Wait read update complete */
 	/* FIXME: Certain revisions of R300 can't recover here.  Not sure of
 	   the cause yet, but this workaround will mask the problem for now.
 	   Other chips usually will pass at the very first test, so the
 	   workaround shouldn't have any effect on them. */
-	for(i = 0; (i < 10000 && INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R); i++);
+
+	for (i = 0; (i < 10000 && INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R); i++);
 	OUTPLL(HTOTAL_CNTL, 0);
+
 	/* Clear reset & atomic update */
 	OUTPLLP(PPLL_CNTL, 0, ~(PPLL_RESET | PPLL_SLEEP | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN));
+
 	/* We may want some locking ... oh well */
 	radeon_msleep(5);
+
 	/* Switch back VCLK source to PPLL */
 	OUTPLLP(VCLK_ECP_CNTL, VCLK_SRC_SEL_PPLLCLK, ~VCLK_SRC_SEL_MASK);
 }
@@ -1248,6 +1333,7 @@ static void radeon_timer_func(void)
 
 #ifdef FIXME_LATER
 	static int32_t start_timer;
+
 	/* delayed LVDS panel power up/down */
 	if (rinfo->lvds_timer)
 	{
@@ -1263,10 +1349,11 @@ static void radeon_timer_func(void)
 	}
 	else
 		start_timer = 0;
-#endif
+#endif /* FIXME_LATER */
 
 	if (rinfo->RenderCallback != NULL)
 		rinfo->RenderCallback(rinfo);
+
 	if ((info->screen_mono != NULL) && info->update_mono)
 	{
 		int32_t foreground = 255, background = 0;
@@ -1275,21 +1362,25 @@ static void radeon_timer_func(void)
 		int dst_x = 0;
 		int w = (int)info->var.xres_virtual;
 		int h = (int)info->var.yres_virtual;
+
 //		info->fbops->SetClippingRectangle(info,0,0,w-1,h-1);
 		src_buf = (uint8_t*)((int32_t)src_buf & ~3);
 		dst_x -= (int32_t)skipleft;
 		w += (int32_t)skipleft;
 		info->fbops->SetupForScanlineCPUToScreenColorExpandFill(info,(int)foreground,(int)background,3,0xffffffff);
 		info->fbops->SubsequentScanlineCPUToScreenColorExpandFill(info,(int)dst_x,0,w,h,skipleft);
+
 		while (--h >= 0)
 		{
 			info->fbops->SubsequentScanline(info, (unsigned long *) src_buf);
 			src_buf += (info->var.xres_virtual >> 3);
 		}
+
 //		info->fbops->DisableClipping(info);
 		if (info->update_mono > 0)
 			info->update_mono = 0;
 	}
+
 	if ((info->var.xres_virtual != info->var.xres)
 	 || (info->var.yres_virtual != info->var.yres))
 	{
@@ -1310,6 +1401,7 @@ static void radeon_timer_func(void)
 			x -= 8;
 			chg = 1;
 		}
+
 		if (((y + info->var.yres) < info->var.yres_virtual) && (rinfo->cursor_y >= (info->var.yres - 8)))
 		{
 			y += 8;
@@ -1329,7 +1421,9 @@ static void radeon_timer_func(void)
 			disp = rinfo->cursor_show;
 			if (disp)
 				info->fbops->HideCursor(info);
+
 			fb_pan_display(info,&var);
+
 			if (disp)
 				info->fbops->ShowCursor(info);
 		}
@@ -1345,14 +1439,19 @@ void radeon_write_mode(struct radeonfb_info *rinfo, struct radeon_regs *mode, in
 {
 	int i;
 	int primary_mon = PRIMARY_MONITOR(rinfo);
+
 	dbg("radeonfb: radeon_write_mode\r\n");
+
 	if (!regs_only)
 		radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0);
+
 	radeon_wait_for_fifo(rinfo, 31);
-	for(i=0; i<10; i++)
+
+	for (i = 0; i < 10; i++)
 		OUTREG(common_regs[i].reg, common_regs[i].val);
+
 	/* Apply surface registers */
-	for(i=0; i<8; i++)
+	for (i = 0; i < 8; i++)
 	{
 		OUTREG(SURFACE0_LOWER_BOUND + 0x10*i, mode->surf_lower_bound[i]);
 		OUTREG(SURFACE0_UPPER_BOUND + 0x10*i, mode->surf_upper_bound[i]);
@@ -1380,9 +1479,11 @@ void radeon_write_mode(struct radeonfb_info *rinfo, struct radeon_regs *mode, in
 	else
 #endif
 		OUTREG(CRTC_OFFSET_CNTL, 0);
+
 	OUTREG(CRTC_PITCH, mode->crtc_pitch);
 	OUTREG(SURFACE_CNTL, mode->surface_cntl);
 	radeon_write_pll_regs(rinfo, mode);
+
 	if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD))
 	{
 		radeon_wait_for_fifo(rinfo, 10);
@@ -1396,6 +1497,7 @@ void radeon_write_mode(struct radeonfb_info *rinfo, struct radeon_regs *mode, in
 		OUTREG(TMDS_CRC, mode->tmds_crc);
 		OUTREG(TMDS_TRANSMITTER_CNTL, mode->tmds_transmitter_cntl);
 	}
+
 	if (!regs_only)
 		radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0);
 	radeon_wait_for_fifo(rinfo, 2);
@@ -1407,11 +1509,13 @@ void radeon_write_mode(struct radeonfb_info *rinfo, struct radeon_regs *mode, in
  */
 static void radeon_calc_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs *regs, uint32_t freq)
 {
-	static const struct {
+	static const struct
+	{
 		int divider;
 		int bitvalue;
 	} *post_div,
-	post_divs[] = {
+	post_divs[] =
+	{
 		{ 1,  0 },
 		{ 2,  1 },
 		{ 4,  2 },
@@ -1424,6 +1528,7 @@ static void radeon_calc_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs
 	};
 	int fb_div, pll_output_freq = 0;
 	int uses_dvo = 0;
+
 	/* Check if the DVO port is enabled and sourced from the primary CRTC. I'm
 	 * not sure which model starts having FP2_GEN_CNTL, I assume anything more
 	 * recent than an r(v)100...
@@ -1443,9 +1548,11 @@ static void radeon_calc_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs
 		uint32_t fp2_gen_cntl = INREG(FP2_GEN_CNTL);
 		uint32_t disp_output_cntl;
 		int source;
+
 		/* FP2 path not enabled */
 		if ((fp2_gen_cntl & FP2_ON) == 0)
 			break;
+
 		/* Not all chip revs have the same format for this register,
 		 * extract the source selection
 		 */
@@ -1464,9 +1571,11 @@ static void radeon_calc_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs
 		}
 		else
 			source = (fp2_gen_cntl >> 13) & 0x1;
+
 		/* sourced from CRTC2 -> exit */
 		if (source == 1)
 			break;
+
 		/* so we end up on CRTC1, let's set uses_dvo to 1 now */
 		uses_dvo = 1;
 		break;
@@ -1476,27 +1585,32 @@ static void radeon_calc_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs
 #endif
 	if (freq > rinfo->pll.ppll_max)
 		freq = rinfo->pll.ppll_max;
-	if (freq*12 < rinfo->pll.ppll_min)
+	if (freq * 12 < rinfo->pll.ppll_min)
 		freq = rinfo->pll.ppll_min / 12;
-	for(post_div = &post_divs[0]; post_div->divider; ++post_div)
+	for (post_div = &post_divs[0]; post_div->divider; ++post_div)
 	{
 		pll_output_freq = post_div->divider * freq;
-		/* If we output to the DVO port (external TMDS), we don't allow an
+
+		/*
+		 * If we output to the DVO port (external TMDS), we don't allow an
 		 * odd PLL divider as those aren't supported on this path
 		 */
 		if (uses_dvo && (post_div->divider & 1))
 			continue;
+
 		if (pll_output_freq >= rinfo->pll.ppll_min  &&
 		    pll_output_freq <= rinfo->pll.ppll_max)
 			break;
 	}
+
 	/* If we fall through the bottom, try the "default value"
 	   given by the terminal post_div->bitvalue */
-	if ( !post_div->divider )
+	if (!post_div->divider)
 	{
 		post_div = &post_divs[post_div->bitvalue];
 		pll_output_freq = post_div->divider * freq;
 	}
+
 	/* If we fall through the bottom, try the "default value"
 	   given by the terminal post_div->bitvalue */
 	if ( !post_div->divider )
@@ -1535,6 +1649,7 @@ int radeonfb_set_par(struct fb_info *info)
 	newmode = (struct radeon_regs *) driver_mem_alloc(sizeof(struct radeon_regs));
 	if (!newmode)
 		return -1; //-ENOMEM;
+
 	/* We always want engine to be idle on a mode switch, even
 	 * if we won't actually change the mode
 	 */
@@ -1582,24 +1697,29 @@ int radeonfb_set_par(struct fb_info *info)
 			newmode->ppll_ref_div = rinfo->panel_info.ref_divider;
 		}
 	}
+
 	dotClock = 1000000000 / pixClock;
 	freq = dotClock / 10; /* x100 */
 	hsync_wid = (hSyncEnd - hSyncStart) / 8;
+
 	if (hsync_wid == 0)
 		hsync_wid = 1;
 	else if (hsync_wid > 0x3f)	/* max */
 		hsync_wid = 0x3f;
+
 	if (mode->vmode & FB_VMODE_DOUBLE)
 	{
 		vSyncStart <<= 1;
 		vSyncEnd <<= 1;
 		vTotal <<= 1;
 	}
+
 	vsync_wid = vSyncEnd - vSyncStart;
 	if (vsync_wid == 0)
 		vsync_wid = 1;
 	else if (vsync_wid > 0x1f)	/* max */
 		vsync_wid = 0x1f;
+
 	// FIXME: this doesn't seem to be used anywhere hSyncPol = mode->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
 	// FIXME: this doesn't seem to be used anywhere vSyncPol = mode->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
 	// FIXME: this doesn't seem to be used anywhere cSync = mode->sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0;
@@ -1624,6 +1744,7 @@ int radeonfb_set_par(struct fb_info *info)
 	/* Clear auto-center etc... */
 	newmode->crtc_more_cntl = rinfo->init_state.crtc_more_cntl;
 	newmode->crtc_more_cntl &= 0xfffffff0;
+
 	if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD))
 	{
 		newmode->crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN;
@@ -1633,13 +1754,16 @@ int radeonfb_set_par(struct fb_info *info)
 	}
 	else
 		newmode->crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN | CRTC_CRT_ON;
+
 	newmode->dac_cntl = /* INREG(DAC_CNTL) | */ DAC_MASK_ALL | DAC_VGA_ADR_EN | DAC_8BIT_EN;
 	newmode->crtc_h_total_disp = ((((hTotal / 8) - 1) & 0x3ff) | (((mode->xres / 8) - 1) << 16));
 	newmode->crtc_h_sync_strt_wid = ((hsync_start & 0x1fff) | (hsync_wid << 16) | (h_sync_pol << 23));
+
 	if (mode->vmode & FB_VMODE_DOUBLE)
 		newmode->crtc_v_total_disp = ((vTotal - 1) & 0xffff) | (((mode->yres << 1) - 1) << 16);
 	else
 		newmode->crtc_v_total_disp = ((vTotal - 1) & 0xffff) | ((mode->yres - 1) << 16);
+
 	newmode->crtc_v_sync_strt_wid = (((vSyncStart - 1) & 0xfff) | (vsync_wid << 16) | (v_sync_pol << 23));
 	/* We first calculate the engine pitch */
 	rinfo->pitch = ((mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8) + 0x3f) & ~(0x3f)) >> 6;
@@ -1653,6 +1777,7 @@ int radeonfb_set_par(struct fb_info *info)
 	 * swapper as well, so we leave it unset now.
 	 */
 	newmode->surface_cntl = 0;
+
 	if (rinfo->big_endian)
 	{
 		/* Setup swapping on both apertures, though we currently
@@ -1674,12 +1799,13 @@ int radeonfb_set_par(struct fb_info *info)
 	}
 
 	/* Clear surface registers */
-	for(i = 0; i < 8; i++)
+	for (i = 0; i < 8; i++)
 	{
 		newmode->surf_lower_bound[i] = 0;
 		newmode->surf_upper_bound[i] = 0x1f;
 		newmode->surf_info[i] = 0;
 	}
+
 	rinfo->bpp = mode->bits_per_pixel;
 	rinfo->depth = depth;
 
@@ -1724,6 +1850,7 @@ int radeonfb_set_par(struct fb_info *info)
 		 & ~(FP_SEL_CRTC2 | FP_RMX_HVSYNC_CONTROL_EN | FP_DFP_SYNC_SEL | FP_CRT_SYNC_SEL
 		  | FP_CRTC_LOCK_8DOT | FP_USE_SHADOW_EN | FP_CRTC_USE_SHADOW_VEND | FP_CRT_SYNC_ALT));
 		newmode->fp_gen_cntl |= (FP_CRTC_DONT_SHADOW_VPAR | FP_CRTC_DONT_SHADOW_HEND | FP_PANEL_FORMAT);
+
 		if (IS_R300_VARIANT(rinfo) || (rinfo->family == CHIP_FAMILY_R200))
 		{
 			newmode->fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
@@ -1734,10 +1861,12 @@ int radeonfb_set_par(struct fb_info *info)
 		}
 		else
 			newmode->fp_gen_cntl |= FP_SEL_CRTC1;
+
 		newmode->lvds_gen_cntl = rinfo->init_state.lvds_gen_cntl;
 		newmode->lvds_pll_cntl = rinfo->init_state.lvds_pll_cntl;
 		newmode->tmds_crc = rinfo->init_state.tmds_crc;
 		newmode->tmds_transmitter_cntl = rinfo->init_state.tmds_transmitter_cntl;
+
 		if (primary_mon == MT_LCD)
 		{
 			newmode->lvds_gen_cntl |= (LVDS_ON | LVDS_BLON);
@@ -1755,11 +1884,13 @@ int radeonfb_set_par(struct fb_info *info)
 				newmode->tmds_transmitter_cntl |= TMDS_PLL_EN;
 			newmode->crtc_ext_cntl &= ~CRTC_CRT_ON;
 		}
+
 		newmode->fp_crtc_h_total_disp = (((rinfo->panel_info.hblank / 8) & 0x3ff) | (((mode->xres / 8) - 1) << 16));
 		newmode->fp_crtc_v_total_disp = (rinfo->panel_info.vblank & 0xffff) | ((mode->yres - 1) << 16);
 		newmode->fp_h_sync_strt_wid = ((rinfo->panel_info.hOver_plus & 0x1fff) | (hsync_wid << 16) | (h_sync_pol << 23));
 		newmode->fp_v_sync_strt_wid = ((rinfo->panel_info.vOver_plus & 0xfff) | (vsync_wid << 16) | (v_sync_pol  << 23));
 	}
+
 	/* do it! */
 	if (!rinfo->asleep)
 	{
@@ -1778,10 +1909,12 @@ int radeonfb_set_par(struct fb_info *info)
 		/* (re)initialize the engine */
 		radeon_engine_init(rinfo);
 	}
+
 	/* Update fix */
 	info->fix.line_length = rinfo->pitch*64;
 	info->fix.visual = rinfo->depth == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
 	driver_mem_free(newmode);
+
 	return 0;
 }
 

sys/BaS.c

@@ -48,6 +48,7 @@
 #include "bootp.h"
 #include "interrupts.h"
 #include "exceptions.h"
+#include "net_timer.h"
 
 //#define BAS_DEBUG
 #if defined(BAS_DEBUG)
@@ -95,20 +96,20 @@ static inline bool pic_rxready(void)
 
 void write_pic_byte(uint8_t value)
 {
-    /* Wait until the transmitter is ready or 1000us are passed */
+	/* Wait until the transmitter is ready or 1000us are passed */
 	waitfor(1000, pic_txready);
 
-    /* Transmit the byte */
-    *(volatile uint8_t*)(&MCF_PSC3_PSCTB_8BIT) = value; // Really 8-bit
+	/* Transmit the byte */
+	*(volatile uint8_t*)(&MCF_PSC3_PSCTB_8BIT) = value; // Really 8-bit
 }
 
 uint8_t read_pic_byte(void)
 {
-    /* Wait until a byte has been received or 1000us are passed */
+	/* Wait until a byte has been received or 1000us are passed */
 	waitfor(1000, pic_rxready);
 
-    /* Return the received byte */
-    return *(volatile uint8_t*)(&MCF_PSC3_PSCTB_8BIT); // Really 8-bit
+	/* Return the received byte */
+	return *(volatile uint8_t*)(&MCF_PSC3_PSCTB_8BIT); // Really 8-bit
 }
 
 void pic_init(void)
@@ -251,7 +252,7 @@ static ARP_INFO	arp_info;
 
 void network_init(void)
 {
-	uint8_t mac[6] = {0x00, 0xcf, 0x54, 0x12, 0x34, 0x56};
+	uint8_t mac[6] = {0x00, 0xcf, 0x54, 0x85, 0xcf, 0x01};	/* this is the original MAC address dbug assigns */
 	uint8_t bc[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; /* this is our broadcast MAC address */
 	IP_ADDR myip = {192, 168, 1, 100};
 	IP_ADDR gateway = {192, 168, 1, 1};
@@ -264,19 +265,19 @@ void network_init(void)
 
 	isr_init();		/* need to call that explicitely, otherwise isr table might be full */
 
-	if (!isr_register_handler(ISR_DBUG_ISR, vector, handler, NULL, (void *) &nif1))
+	if (!isr_register_handler(vector, handler, NULL, (void *) &nif1))
 	{
 		dbg("%s: unable to register handler for vector %d\r\n", __FUNCTION__, vector);
 		return;
 	}
 
-    /*
-     * Register the DMA interrupt handler
-     */
-    handler = dma_interrupt_handler;
-    vector = 112;
+	/*
+	 * Register the DMA interrupt handler
+	 */
+	handler = dma_interrupt_handler;
+	vector = 112;
 
-    if (!isr_register_handler(ISR_DBUG_ISR, vector, handler, NULL,NULL))
+	if (!isr_register_handler(vector, handler, NULL,NULL))
 	{
 		dbg("%s: Error: Unable to register handler for vector %s\r\n", __FUNCTION__, vector);
 		return;
@@ -290,10 +291,10 @@ void network_init(void)
 	memcpy(nif1.hwa, mac, 6);
 	memcpy(nif1.broadcast, bc, 6);
 
-	dbg("%s: ethernet address is %02X:%02X:%02X:%02X:%02X:%02X\r\n", __FUNCTION__, 
+	dbg("%s: ethernet address is %02X:%02X:%02X:%02X:%02X:%02X\r\n", __FUNCTION__,
 				nif1.hwa[0], nif1.hwa[1], nif1.hwa[2],
 				nif1.hwa[3], nif1.hwa[4], nif1.hwa[5]);
-	
+
 	timer_init(TIMER_NETWORK, TMR_INTC_LVL, TMR_INTC_PRI);
 
 	arp_init(&arp_info);
@@ -345,16 +346,16 @@ void BaS(void)
 	MCF_MMU_MMUCR = MCF_MMU_MMUCR_EN;			/* MMU on */
 	NOP();										/* force pipeline sync */
 	xprintf("finished\r\n");
-	
+
 	#ifdef MACHINE_FIREBEE
 	xprintf("IDE reset: ");
 	/* IDE reset */
 	* (volatile uint8_t *) (0xffff8802 - 2) = 14;
 	* (volatile uint8_t *) (0xffff8802 - 0) = 0x80;
 	wait(1);
-	
+
 	* (volatile uint8_t *) (0xffff8802 - 0) = 0;
-	
+
 	xprintf("finished\r\n");
 	xprintf("enable video: ");
 	/*
@@ -383,22 +384,22 @@ void BaS(void)
 #ifdef _NOT_USED_
 	screen_init();
 
-	    /* experimental */
-    {
-        int i;
-        uint32_t *scradr = 0xd00000;
+		/* experimental */
+	{
+		int i;
+		uint32_t *scradr = 0xd00000;
 
-        for (i = 0; i < 100; i++)
-        {
-            uint32_t *p = scradr;
-
-            for (p = scradr; p < scradr + 1024 * 150L; p++)
-            {
-				*p = 0xffffffff;
-		    }
+		for (i = 0; i < 100; i++)
+		{
+			uint32_t *p = scradr;
 
 			for (p = scradr; p < scradr + 1024 * 150L; p++)
-		    {
+			{
+				*p = 0xffffffff;
+			}
+
+			for (p = scradr; p < scradr + 1024 * 150L; p++)
+			{
 				*p = 0x0;
 			}
 		}
@@ -441,10 +442,11 @@ void BaS(void)
 
 	/* Jump into the OS */
 	typedef void void_func(void);
-	typedef struct {
+	struct rom_header
+	{
 		void *initial_sp;
 		void_func *initial_pc;
-	} ROM_HEADER;
+	};
 
 	xprintf("BaS initialization finished, enable interrupts\r\n");
 	enable_coldfire_interrupts();
@@ -453,6 +455,6 @@ void BaS(void)
 	network_init();
 
 	xprintf("call EmuTOS\r\n");
-	ROM_HEADER* os_header = (ROM_HEADER*)TOS;
+	struct rom_header *os_header = (struct rom_header *) TOS;
 	os_header->initial_pc();
 }

sys/cache.c

@@ -44,24 +44,24 @@ uint32_t cacr_get(void)
 
 void flush_and_invalidate_caches(void)
 {
-	__asm__ (
-	"	clr.l		d0\n\t"
-	"	clr.l		d1\n\t"
-	"	move.l		d0,a0\n\t"
-	"cfa_setloop:\n\t"
-	"	cpushl		bc,(a0)				| flush\n\t"
-	"	lea			0x10(a0),a0			| index+1\n\t"
-	"	addq.l		#1,d1				| index+1\n\t"
-	"	cmpi.w		#512,d1				| all sets?\n\t"
-	"	bne.s		cfa_setloop			| no->\n\t"
-	"	clr.l		d1\n\t"
-	"	addq.l		#1,d0\n\t"
-	"	move.l		d0,a0\n\t"
-	"	cmpi.w		#4,d0				| all ways?\n\t"
-	"	bne.s		cfa_setloop			| no->\n\t"
-	/* input */	:
-	/* output */	:
-	/* clobber */	: "d0", "d1", "a0"
+    __asm__ __volatile__(
+            "	clr.l		d0                  \n\t"
+            "	clr.l		d1                  \n\t"
+            "	move.l		d0,a0               \n\t"
+            "cfa_setloop:                       \n\t"
+            "	cpushl		bc,(a0)				| flush\n\t"
+            "	lea			0x10(a0),a0			| index+1\n\t"
+            "	addq.l		#1,d1				| index+1\n\t"
+            "	cmpi.w		#512,d1				| all sets?\n\t"
+            "	bne.s		cfa_setloop			| no->\n\t"
+            "	clr.l		d1                  \n\t"
+            "	addq.l		#1,d0               \n\t"
+            "	move.l		d0,a0               \n\t"
+            "	cmpi.w		#4,d0				| all ways?\n\t"
+            "	bne.s		cfa_setloop			| no->\n\t"
+            /* input */	:
+            /* output */	:
+            /* clobber */	: "d0", "d1", "a0"
 	);
 }
 
@@ -81,25 +81,35 @@ void flush_icache_range(void *address, size_t size)
 	if (start_set > end_set) {
 		/* from the begining to the lowest address */
 		for (set = 0; set <= end_set; set += (0x10 - 3)) {
-			asm volatile("cpushl ic,(%0)\n\t"
-						"addq.l #1,%0\n\t"
-						"cpushl ic,(%0)\n\t"
-						"addq.l #1,%0\n\t"
-						"cpushl ic,(%0)\n\t"
-						"addq.l #1,%0\n\t"
-						"cpushl ic,(%0)" : "=a" (set) : "a" (set));
+            __asm__ __volatile__(
+                        "       cpushl  ic,(%[set])         \n\t"
+                        "       addq.l  #1,%[set]           \n\t"
+                        "       cpushl  ic,(%[set])         \n\t"
+                        "       addq.l  #1,%[set]           \n\t"
+                        "       cpushl  ic,(%[set])         \n\t"
+                        "       addq.l  #1,%[set]           \n\t"
+                        "       cpushl  ic,(%[set])         \n\t"
+                 : /* output parameters  */
+                 : [set] "a" (set)    /* input parameters */
+                 :
+            );
 		}
 		/* next loop will finish the cache ie pass the hole */
 		end_set = LAST_ICACHE_ADDR;
 	}
 	for (set = start_set; set <= end_set; set += (0x10 - 3)) {
-		asm volatile("cpushl ic,(%0)\n\t"
-					"addq.l #1,%0\n\t"
-					"cpushl ic,(%0)\n\t"
-					"addq%.l #1,%0\n\t"
-					"cpushl ic,(%0)\n\t"
-					"addq.l #1,%0\n\t"
-					"cpushl ic,(%0)" : "=a" (set) : "a" (set));
+        __asm__ __volatile__(
+                    "       cpushl  ic,(%[set])             \n\t"
+                    "       addq.l  #1,%[set]               \n\t"
+                    "       cpushl  ic,(%[set])             \n\t"
+                    "       addq.l  #1,%[set]               \n\t"
+                    "       cpushl  ic,(%[set])             \n\t"
+                    "       addq.l  #1,%[set]               \n\t"
+                    "       cpushl  ic,(%[set])"
+                    : /* output parameters */
+                    : [set] "a" (set)
+                    :
+         );
 	}
 }
 
@@ -121,25 +131,37 @@ void flush_dcache_range(void *address, size_t size)
 
 	if (start_set > end_set) {
 		/* from the begining to the lowest address */
-		for (set = 0; set <= end_set; set += (0x10 - 3)) {
-			asm volatile("cpushl dc,(%0)\n\t"
-						"addq.l #1,%0\n\t"
-						"cpushl dc,(%0)\n\t"
-						"addq.l #1,%0\n\t"
-						"cpushl dc,(%0)\n\t"
-						"addq.l #1,%0\n\t"
-						"cpushl dc,(%0)" : "=a" (set) : "a" (set));
+        for (set = 0; set <= end_set; set += (0x10 - 3))
+        {
+            __asm__ __volatile__(
+                        "       cpushl  dc,(%[set])         \n\t"
+                        "       addq.l  #1,%[set]           \n\t"
+                        "       cpushl  dc,(%[set])         \n\t"
+                        "       addq.l  #1,%[set]           \n\t"
+                        "       cpushl  dc,(%[set])         \n\t"
+                        "       addq.l  #1,%[set]           \n\t"
+                        "       cpushl  dc,(%[set])         \n\t"
+                        : /* output parameters */
+                        : [set] "a" (set)
+                        : /* clobbered registers */
+            );
 		}
 		/* next loop will finish the cache ie pass the hole */
 		end_set = LAST_DCACHE_ADDR;
 	}
-	for (set = start_set; set <= end_set; set += (0x10 - 3)) {
-		asm volatile("cpushl dc,(%0)\n\t"
-					"addq.l #1,%0\n\t"
-					"cpushl dc,(%0)\n\t"
-					"addq%.l #1,%0\n\t"
-					"cpushl dc,(%0)\n\t"
-					"addq.l #1,%0\n\t"
-					"cpushl dc,(%0)" : "=a" (set) : "a" (set));
+    for (set = start_set; set <= end_set; set += (0x10 - 3))
+    {
+        __asm__ __volatile__(
+                    "       cpushl      dc,(%[set])     \n\t"
+                    "       addq.l      #1,%[set]       \n\t"
+                    "       cpushl      dc,(%[set])     \n\t"
+                    "       addq%.l     #1,%[set]       \n\t"
+                    "       cpushl      dc,(%[set])     \n\t"
+                    "       addq.l      #1,%[set]       \n\t"
+                    "       cpushl      dc,(%[set])     \n\t"
+                    : /* output parameters */
+                    : [set] "a" (set)
+                    : /* clobbered registers */
+        );
 	}
 }

sys/driver_mem.c

@@ -18,10 +18,14 @@
 #include "usb.h"
 #include "exceptions.h"		/* set_ipl() */
 
-#if MACHINE_FIREBEE
+#if defined(MACHINE_FIREBEE)
 #include "firebee.h"
-#elif MACHINE_M5484LITE
+#elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
+#else
+#error "unknown machine!"
 #endif
 
 //#define DBG_DM

sys/init_fpga.c

@@ -38,59 +38,50 @@ extern uint8_t _FPGA_FLASH_DATA[];
 extern uint8_t _FPGA_FLASH_DATA_SIZE[];
 #define FPGA_FLASH_DATA_SIZE	((uint32_t) &_FPGA_FLASH_DATA_SIZE[0])
 
-
-#ifdef _NOT_USED_
-void test_longword(void)
+void config_gpio_for_fpga_config(void)
 {
-	uint32_t *fpga_data = (uint32_t *) FPGA_FLASH_DATA;
-	const uint32_t *fpga_flash_data_end = (uint32_t *) FPGA_FLASH_DATA + FPGA_FLASH_DATA_SIZE;
-	do
-	{
-		uint32_t value = *fpga_data++;
-		xprintf("LONGWORDS: addr=%p, value=%08x\r", fpga_data, value);
-	} while (fpga_data < fpga_flash_data_end);
-	xprintf("finished. \r\n");
+#if defined(MACHINE_FIREBEE)
+	/*
+	 * Configure GPIO FEC1L port directions (needed to load FPGA configuration)
+	 */
+	MCF_GPIO_PDDR_FEC1L = 0 |								/* bit 7 = input */
+						  0	|								/* bit 6 = input */
+						  0 | 								/* bit 5 = input */
+						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L4 |	/* bit 4 = LED => output */
+						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L3 |	/* bit 3 = PRG_DQ0 => output */
+						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L2 |	/* bit 2 = FPGA_CONFIG => output */
+						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L1 |	/* bit 1 = PRG_CLK (FPGA) => output */
+						  0;								/* bit 0 => input */
+#endif /* MACHINE_FIREBEE */
 }
 
-void test_word(void)
+void config_gpio_for_jtag_config(void)
 {
-	uint16_t *fpga_data = (uint16_t *) FPGA_FLASH_DATA;
-	const uint16_t *fpga_flash_data_end = (uint16_t *) FPGA_FLASH_DATA + FPGA_FLASH_DATA_SIZE;
-
-	do
-	{
-		uint16_t value = *fpga_data++;
-		xprintf("WORDS: addr=%p, value=%04x\r", fpga_data, value);
-	} while (fpga_data < fpga_flash_data_end);
-	xprintf("finished. \r\n");
+	/*
+	 * configure FEC1L port directions to enable external JTAG configuration download to FPGA
+	 */
+	MCF_GPIO_PDDR_FEC1L = 0 |
+						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L4;	/* bit 4 = LED => output */
+															/* all other bits = input */
+	/*
+	 * unfortunately, the GPIO module cannot trigger interrupts. That means FPGA_CONFIG needs to be polled to detect
+	 * external FPGA (re)configuration and reset the system in that case. Could be done from the OS as well...
+	 */
 }
 
-void test_byte(void)
-{
-	uint8_t *fpga_data = (uint8_t *) FPGA_FLASH_DATA;
-	const uint8_t *fpga_flash_data_end = (uint8_t *) FPGA_FLASH_DATA + FPGA_FLASH_DATA_SIZE;
-
-	do
-	{
-		uint8_t value = *fpga_data++;
-		xprintf("LONGWORDS: addr=%p, value=%08x\r", fpga_data, value);
-	} while (fpga_data < fpga_flash_data_end);
-	xprintf("finished. \r\n");
-}
-#endif /* _NOT_USED_ */
-
 /*
  * load FPGA
  */
-void init_fpga(void)
+bool init_fpga(void)
 {
 	uint8_t *fpga_data;
 	volatile int32_t time, start, end;
 	int i;
 
 	xprintf("FPGA load config... ");
-	start = MCF_SLT0_SCNT; 
+	start = MCF_SLT0_SCNT;
 
+	config_gpio_for_fpga_config();
 	MCF_GPIO_PODR_FEC1L &= ~FPGA_CLOCK;		/* FPGA clock => low */
 
 	/* pulling FPGA_CONFIG to low resets the FPGA */
@@ -109,7 +100,7 @@ void init_fpga(void)
 	 * configuration cycle consists of 3 stages<65>reset, configuration, and initialization.
 	 * While nCONFIG is low, the device is in reset. When the device comes out of reset,
 	 * nCONFIG must be at a logic high level in order for the device to release the open-drain
- 	 * nSTATUS pin. After nSTATUS is released, it is pulled high by a pull-up resistor and the FPGA
+	 * nSTATUS pin. After nSTATUS is released, it is pulled high by a pull-up resistor and the FPGA
 	 * is ready to receive configuration data. Before and during configuration, all user I/O pins
 	 * are tri-stated. Stratix series, Arria series, and Cyclone series have weak pull-up resistors
 	 * on the I/O pins which are on, before and during configuration.
@@ -159,11 +150,12 @@ void init_fpga(void)
 #endif /* _NOT_USED_ */
 		end = MCF_SLT0_SCNT;
 		time = (start - end) / (SYSCLK / 1000) / 1000;
-		
+
 		xprintf("finished (took %f seconds).\r\n", time / 1000.0);
+		config_gpio_for_jtag_config();
+		return true;
 	}
-	else
-	{
-		xprintf("FAILED!\r\n");
-	}
+	xprintf("FAILED!\r\n");
+	config_gpio_for_jtag_config();
+	return false;
 }

sys/interrupts.c

@@ -30,13 +30,16 @@
 #include "exceptions.h"
 #include "interrupts.h"
 #include "bas_printf.h"
+#include "startcf.h"
+#include "cache.h"
+#include "util.h"
 
 extern void (*rt_vbr[])(void);
 #define VBR	rt_vbr
 
 #define IRQ_DEBUG
 #if defined(IRQ_DEBUG)
-#define dbg(format, arg...) do { xprintf("DEBUG: " format, ##arg); } while (0)
+#define dbg(format, arg...) do { xprintf("DEBUG %s(): " format, __FUNCTION__, ##arg); } while (0)
 #else
 #define dbg(format, arg...) do { ; } while (0)
 #endif
@@ -57,7 +60,7 @@ int register_interrupt_handler(uint8_t source, uint8_t level, uint8_t priority,
 
 	if (source < 1 || source > 63)
 	{
-		dbg("%s: interrupt source %d not defined\r\n", __FUNCTION__, source);
+		dbg("interrupt source %d not defined\r\n", source);
 		return -1;
 	}
 
@@ -68,7 +71,7 @@ int register_interrupt_handler(uint8_t source, uint8_t level, uint8_t priority,
 	{
 		if (ICR[i] == lp)
 		{
-			dbg("%s: level %d and priority %d already used for interrupt source %d!\r\n", __FUNCTION__,
+			dbg("level %d and priority %d already used for interrupt source %d!\r\n",
 					level, priority, i);
 			return -1;
 		}
@@ -88,31 +91,29 @@ int register_interrupt_handler(uint8_t source, uint8_t level, uint8_t priority,
 	return 0;
 }
 
-#ifndef UIF_MAX_ISR_ENTRY
-#define UIF_MAX_ISR_ENTRY   (20)
+#ifndef MAX_ISR_ENTRY
+#define MAX_ISR_ENTRY   (20)
 #endif
 
 
 typedef struct
 {
 	int     vector;
-	int     type;
 	int     (*handler)(void *, void *);
 	void    *hdev;
 	void    *harg;
 } ISRENTRY;
 
-ISRENTRY isrtab[UIF_MAX_ISR_ENTRY];
+ISRENTRY isrtab[MAX_ISR_ENTRY];
 
 
 void isr_init(void)
 {
 	int index;
 
-	for (index = 0; index < UIF_MAX_ISR_ENTRY; index++)
+	for (index = 0; index < MAX_ISR_ENTRY; index++)
 	{
 		isrtab[index].vector = 0;
-		isrtab[index].type = 0;
 		isrtab[index].handler = 0;
 		isrtab[index].hdev = 0;
 		isrtab[index].harg = 0;
@@ -120,41 +121,36 @@ void isr_init(void)
 }
 
 
-int isr_register_handler(int type, int vector, 
-		int (*handler)(void *, void *), void *hdev, void *harg)
+int isr_register_handler(int vector, int (*handler)(void *, void *), void *hdev, void *harg)
 {
 	/*
 	 * This function places an interrupt handler in the ISR table,
 	 * thereby registering it so that the low-level handler may call it.
 	 *
-	 * The two parameters are intended for the first arg to be a 
-	 * pointer to the device itself, and the second a pointer to a data 
+	 * The two parameters are intended for the first arg to be a
+	 * pointer to the device itself, and the second a pointer to a data
 	 * structure used by the device driver for that particular device.
 	 */
 	int index;
 
-	if ((vector == 0) || 
-			((type != ISR_DBUG_ISR) && (type != ISR_USER_ISR)) ||
-			(handler == NULL))
+	if ((vector == 0) || (handler == NULL))
 	{
-		dbg("%s: illegal type, vector or handler!\r\n", __FUNCTION__);
+		dbg("illegal vector or handler!\r\n");
 		return false;
 	}
 
-	for (index = 0; index < UIF_MAX_ISR_ENTRY; index++)
+	for (index = 0; index < MAX_ISR_ENTRY; index++)
 	{
-		if ((isrtab[index].vector == vector) &&
-				(isrtab[index].type == type))
+		if (isrtab[index].vector == vector)
 		{
-			/* only one entry of each type per vector */
-			dbg("%s: already set handler with this type and vector (%d, %d)\r\n", __FUNCTION__, type, vector);
+			/* one cross each, only! */
+			dbg("already set handler with this vector (%d, %d)\r\n", vector);
 			return false;
 		}
 
 		if (isrtab[index].vector == 0)
 		{
 			isrtab[index].vector = vector;
-			isrtab[index].type = type;
 			isrtab[index].handler = handler;
 			isrtab[index].hdev = hdev;
 			isrtab[index].harg = harg;
@@ -162,26 +158,24 @@ int isr_register_handler(int type, int vector,
 			return true;
 		}
 	}
-	dbg("%s: no available slots to register handler for vector %d\n\r", __FUNCTION__, vector);
+	dbg("no available slots to register handler for vector %d\n\r", vector);
 
 	return false;   /* no available slots */
 }
 
-void isr_remove_handler(int type, int (*handler)(void *, void *))
+void isr_remove_handler(int (*handler)(void *, void *))
 {
 	/*
 	 * This routine removes from the ISR table all
-	 * entries that matches 'type' and 'handler'.
+	 * entries that matches 'handler'.
 	 */
 	int index;
 
-	for (index = 0; index < UIF_MAX_ISR_ENTRY; index++)
+	for (index = 0; index < MAX_ISR_ENTRY; index++)
 	{
-		if ((isrtab[index].handler == handler) && 
-				(isrtab[index].type == type))
+		if (isrtab[index].handler == handler)
 		{
 			isrtab[index].vector = 0;
-			isrtab[index].type = 0;
 			isrtab[index].handler = 0;
 			isrtab[index].hdev = 0;
 			isrtab[index].harg = 0;
@@ -189,7 +183,7 @@ void isr_remove_handler(int type, int (*handler)(void *, void *))
 			return;
 		}
 	}
-	dbg("%s: no such handler registered (type=%d, handler=%p\r\n", __FUNCTION__, type, handler);
+	dbg("no such handler registered (handler=%p\r\n", handler);
 }
 
 
@@ -203,22 +197,216 @@ bool isr_execute_handler(int vector)
 	bool retval = false;
 
 	/*
-	 * First locate a BaS Interrupt Service Routine handler.
+	 * locate a BaS Interrupt Service Routine handler.
 	 */
-	for (index = 0; index < UIF_MAX_ISR_ENTRY; index++)
+	for (index = 0; index < MAX_ISR_ENTRY; index++)
 	{
-		if ((isrtab[index].vector == vector) &&
-				(isrtab[index].type == ISR_DBUG_ISR))
+		if (isrtab[index].vector == vector)
 		{
 			retval = true;
-		
+
 			if (isrtab[index].handler(isrtab[index].hdev, isrtab[index].harg))
 			{
 				return retval;
 			}
 		}
 	}
-	dbg("%s: no BaS isr handler for vector %d found\r\n", __FUNCTION__, vector);
+	dbg("no BaS isr handler for vector %d found\r\n", vector);
+
 	return retval;
 }
 
+/*
+ * PIC interrupt handler for Firebee
+ */
+void pic_interrupt_handler(void)
+{
+	uint8_t rcv_byte;
+
+	rcv_byte = MCF_PSC3_PSCRB_8BIT;
+	if (rcv_byte == 2)	// PIC requests RTC data
+	{
+		uint8_t *rtc_reg= (uint8_t *) 0xffff8961;
+		uint8_t *rtc_data = (uint8_t *) 0xffff8963;
+		int index = 0;
+
+		xprintf("PIC interrupt requesting RTC data\r\n");
+
+		MCF_PSC3_PSCTB_8BIT = 0x82;		// header byte to PIC
+		do
+		{
+			*rtc_reg = 0;
+			MCF_PSC3_PSCTB_8BIT = *rtc_data;
+		} while (index++ < 64);
+	}
+}
+
+extern int32_t video_sbt;
+extern int32_t video_tlb;
+
+void video_addr_timeout(void)
+{
+	uint32_t addr = 0x0L;
+	uint32_t *src;
+	uint32_t *dst;
+	uint32_t asid;
+
+	dbg("video address timeout\r\n");
+	flush_and_invalidate_caches();
+
+	do
+	{
+		uint32_t tlb;
+		uint32_t page_attr;
+
+		/*
+		 * search tlb entry id for addr (if not available, the MMU
+		 * will provide a new one based on its LRU algorithm)
+		 */
+		MCF_MMU_MMUAR = addr;
+		MCF_MMU_MMUOR =
+				MCF_MMU_MMUOR_STLB |
+				MCF_MMU_MMUOR_RW |
+				MCF_MMU_MMUOR_ACC;
+		NOP();
+		tlb = (MCF_MMU_MMUOR >> 16) & 0xffff;
+
+		/*
+		 * retrieve tlb entry with the found TLB entry id
+		 */
+		MCF_MMU_MMUAR = tlb;
+		MCF_MMU_MMUOR =
+				MCF_MMU_MMUOR_STLB |
+				MCF_MMU_MMUOR_ADR |
+				MCF_MMU_MMUOR_RW |
+				MCF_MMU_MMUOR_ACC;
+		NOP();
+
+		asid = (MCF_MMU_MMUTR >> 2) & 0x1fff;	/* fetch ASID of page */;
+		if (asid != sca_page_ID)                /* check if screen area */
+		{
+			addr += 0x100000;
+			continue;                           /* next page */
+		}
+
+		/* modify found TLB entry */
+		if (addr == 0x0)
+		{
+			page_attr =
+				MCF_MMU_MMUDR_LK |
+				MCF_MMU_MMUDR_SZ(0) |
+				MCF_MMU_MMUDR_CM(0) |
+				MCF_MMU_MMUDR_R |
+				MCF_MMU_MMUDR_W |
+				MCF_MMU_MMUDR_X;
+		}
+		else
+		{
+			page_attr =
+				MCF_MMU_MMUTR_SG |
+				MCF_MMU_MMUTR_V;
+		}
+
+
+		MCF_MMU_MMUTR = addr;
+		MCF_MMU_MMUDR = page_attr;
+		MCF_MMU_MMUOR =
+				MCF_MMU_MMUOR_STLB |
+				MCF_MMU_MMUOR_ADR |
+				MCF_MMU_MMUOR_ACC |
+				MCF_MMU_MMUOR_UAA;
+		NOP();
+
+		dst = (uint32_t *) 0x60000000 + addr;
+		src = (uint32_t *) addr;
+		while (dst < (uint32_t *) 0x60000000 + addr + 0x10000)
+		{
+			*dst++ = *src++;
+			*dst++ = *src++;
+			*dst++ = *src++;
+			*dst++ = *src++;
+		}
+
+
+
+		addr += 0x100000;
+	} while (addr < 0xd00000);
+	video_tlb = 0x2000;
+	video_sbt = 0;
+}
+
+
+/*
+ * blink the Firebee's LED to show we are still alive
+ */
+void blink_led(void)
+{
+	static uint16_t blinker = 0;
+
+	if ((blinker++ & 0x80) > 0)
+	{
+		MCF_GPIO_PODR_FEC1L |= (1 << 4);    /* LED off */
+	}
+	else
+	{
+		MCF_GPIO_PODR_FEC1L &= ~(1 << 4);   /* LED on */
+	}
+}
+
+/*
+ * Atari MFP interrupt registers.
+ *
+ * TODO: should go into a header file
+ */
+
+#define FALCON_MFP_IERA     *((volatile uint8_t *) 0xfffffa07)
+#define FALCON_MFP_IERB     *((volatile uint8_t *) 0xfffffa09)
+#define FALCON_MFP_IPRA     *((volatile uint8_t *) 0xfffffa0b)
+#define FALCON_MFP_IPRB     *((volatile uint8_t *) 0xfffffa0d)
+#define FALCON_MFP_IMRA     *((volatile uint8_t *) 0xfffffa13)
+#define FALCON_MFP_IMRB     *((volatile uint8_t *) 0xfffffa15)
+
+bool irq6_acsi_dma_interrupt(void)
+{
+	dbg("ACSI DMA interrupt\r\n");
+
+	/*
+	 * TODO: implement handler
+	 */
+
+	return false;
+}
+
+bool irq6_interrupt_handler(uint32_t sf1, uint32_t sf2)
+{
+	bool handled = false;
+
+	MCF_EPORT_EPFR |= (1 << 6);	/* clear int6 from edge port */
+
+	if (video_sbt != 0 && (video_sbt - 0x70000000) > MCF_SLT0_SCNT)
+	{
+		video_addr_timeout();
+		handled = true;
+	}
+
+	/*
+	 * check if ACSI DMA interrupt
+	 */
+
+	if (FALCON_MFP_IERA & (1 << 7))
+	{
+		/* ACSI interrupt is enabled */
+		if (FALCON_MFP_IPRA & (1 << 7))
+		{
+			irq6_acsi_dma_interrupt();
+			handled = true;
+		}
+	}
+
+	if (FALCON_MFP_IPRA || FALCON_MFP_IPRB)
+	{
+		blink_led();
+	}
+
+	return handled;
+}

sys/mmu.c

@@ -56,6 +56,8 @@
 #include "firebee.h"
 #elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
 #else
 #error "unknown machine!"
 #endif /* MACHINE_FIREBEE */
@@ -80,7 +82,7 @@ inline uint32_t set_asid(uint32_t value)
 		"movec		%[value],ASID\n\t"
 		: /* no output */
 		: [value] "r" (value)
-		: 
+		:
 	);
 
 	rt_asid = value;
@@ -88,7 +90,7 @@ inline uint32_t set_asid(uint32_t value)
 	return ret;
 }
 
-							
+
 /*
  * set ACRx register
  * saves new value to rt_acrx and returns former value
@@ -97,7 +99,7 @@ inline uint32_t set_acr0(uint32_t value)
 {
 	extern uint32_t rt_acr0;
 	uint32_t ret = rt_acr0;
-	
+
 	__asm__ __volatile__(
 		"movec		%[value],ACR0\n\t"
 		: /* not output */
@@ -117,7 +119,7 @@ inline uint32_t set_acr1(uint32_t value)
 {
 	extern uint32_t rt_acr1;
 	uint32_t ret = rt_acr1;
-	
+
 	__asm__ __volatile__(
 		"movec		%[value],ACR1\n\t"
 		: /* not output */
@@ -138,7 +140,7 @@ inline uint32_t set_acr2(uint32_t value)
 {
 	extern uint32_t rt_acr2;
 	uint32_t ret = rt_acr2;
-	
+
 	__asm__ __volatile__(
 		"movec		%[value],ACR2\n\t"
 		: /* not output */
@@ -158,7 +160,7 @@ inline uint32_t set_acr3(uint32_t value)
 {
 	extern uint32_t rt_acr3;
 	uint32_t ret = rt_acr3;
-	
+
 	__asm__ __volatile__(
 		"movec		%[value],ACR3\n\t"
 		: /* not output */
@@ -193,7 +195,7 @@ void mmu_init(void)
 	uint32_t MMUBAR = (uint32_t) &_MMUBAR[0];
 	extern uint8_t _TOS[];
 	uint32_t TOS = (uint32_t) &_TOS[0];
-	
+
 	set_asid(0);			/* do not use address extension (ASID provides virtual 48 bit addresses */
 
 	/* set data access attributes in ACR0 and ACR1 */
@@ -203,29 +205,38 @@ void mmu_init(void)
 			ACR_AMM(0) |							/* control region > 16 MB */
 			ACR_S(ACR_S_ALL) |						/* match addresses in user and supervisor mode */
 			ACR_E(1) |								/* enable ACR */
-#if MACHINE_FIREBEE
+#if defined(MACHINE_FIREBEE)
 			ACR_ADMSK(0x3f) |						/* cover 1GB area from 0xc0000000 to 0xffffffff */
 			ACR_BA(0xc0000000));					/* (equals area from 3 to 4 GB */
-#elif MACHINE_M5484LITE
+#elif defined(MACHINE_M5484LITE)
 			ACR_ADMSK(0x7f) |						/* cover 2 GB area from 0x80000000 to 0xffffffff */
 			ACR_BA(0x80000000));
+#elif defined(MACHINE_M54455)
+			ACR_ADMSK(0x7f) |
+			ACR_BA(0x80000000));					/* FIXME: not determined yet */
+#else
+#error unknown machine!
 #endif /* MACHINE_FIREBEE */
-	
+
 	// set_acr1(0x601fc000);
 	set_acr1(ACR_W(0) |
 			ACR_SP(0) |
 			ACR_CM(0) |
-#if MACHINE_FIREBEE
+#if defined(MACHINE_FIREBEE)
 			ACR_CM(ACR_CM_CACHEABLE_WT) |			/* video RAM on the Firebee */
-#elif MACHINE_M5484LITE
+#elif defined(MACHINE_M5484LITE)
 			ACR_CM(ACR_CM_CACHE_INH_PRECISE) |		/* Compact Flash on the M548xLITE */
+#elif defined(MACHINE_M54455)
+			ACR_CM(ACR_CM_CACHE_INH_PRECISE) |		/* FIXME: not determined yet */
+#else
+#error unknown machine!
 #endif /* MACHINE_FIREBEE */
 			ACR_AMM(0) |
 			ACR_S(ACR_S_ALL) |
 			ACR_E(1) |
 			ACR_ADMSK(0x1f) |
 			ACR_BA(0x60000000));
-	
+
 	/* set instruction access attributes in ACR2 and ACR3 */
 
 	//set_acr2(0xe007c400);
@@ -273,7 +284,7 @@ void mmu_init(void)
 	 * mapped to physical address 0x60d0'0000 (FPGA video memory)
 	 * video RAM: read write execute normal write true
 	 */
-	
+
 	MCF_MMU_MMUTR = 0x00d00000 |			/* virtual address */
 #if defined(MACHINE_FIREBEE)
 					MCF_MMU_MMUTR_ID(SCA_PAGE_ID) |
@@ -285,6 +296,10 @@ void mmu_init(void)
 	MCF_MMU_MMUDR = 0x60d00000 |			/* physical address */
 #elif defined(MACHINE_M5484LITE)
 	MCF_MMU_MMUDR = 0x00d00000 |			/* physical address */
+#elif defined(MACHINE_M54455)
+	MCF_MMU_MMUDR = 0x60d00000 |			/* FIXME: not determined yet */
+#else
+#error unknown machine!
 #endif /* MACHINE_FIREBEE */
 					MCF_MMU_MMUDR_SZ(0) |	/* 1 MB page size */
 					MCF_MMU_MMUDR_CM(0x0) |	/* cachable writethrough */
@@ -370,7 +385,7 @@ void mmu_init(void)
 	MCF_MMU_MMUOR = MCF_MMU_MMUOR_ITLB | 	/* instruction */
 					MCF_MMU_MMUOR_ACC |     /* access TLB */
 					MCF_MMU_MMUOR_UAA;      /* update allocation address field */
-					
+
 	/*
 	 * Map (locked) the very last MB of physical SDRAM (this is where the driver buffers reside) to the same
 	 * virtual address. Used uncached for drivers.

sys/startcf.S

@@ -1,3 +1,4 @@
+
 /*
  * This object file must be the first to be linked,
  * so it will be placed at the very beginning of the ROM.
@@ -49,7 +50,8 @@ _rom_entry:
 		lea 	__SUP_SP,a7
 		move.l	#0,(sp)
 
-		/* Initialize the processor caches.
+		/*
+		 * Initialize the processor caches.
 		 * The instruction cache is fully enabled.
 		 * The data cache is enabled, but cache-inhibited by default.
 		 * Later, the MMU will fully activate the data cache for specific areas.

sys/sysinit.c

@@ -2,7 +2,7 @@
  * File:		sysinit.c
  * Purpose:		Power-on Reset configuration of the Firebee board.
  *
- * Notes: 
+ * Notes:
  *
  * This file is part of BaS_gcc.
  *
@@ -37,14 +37,17 @@
 #include "wait.h"
 #include "util.h"
 #include "version.h"
-#ifdef MACHINE_FIREBEE
+#if defined(MACHINE_FIREBEE)
 #include "firebee.h"
-#endif /* MACHINE_FIREBEE */
-
-#ifdef MACHINE_M5484LITE
+#elif defined(MACHINE_M5484LITE)
 #include "m5484l.h"
+#elif defined(MACHINE_M54455)
+#include "m54455.h"
+#else
+#error "unknown machine"
 #endif /* MACHINE_M5484LITE */
 
+#
 #include "dma.h"
 #include "mod_devicetable.h"
 #include "pci_ids.h"
@@ -52,12 +55,14 @@
 #include "usb.h"
 #include "video.h"
 
-#define UNUSED(x) (void)(x)               /* Unused variable         */
+#define UNUSED(x) (void)(x)				/* Unused variable         */
+
+bool fpga_configured = false;			/* for FPGA JTAG configuration */
 
 extern volatile long _VRAM;	/* start address of video ram from linker script */
 
 /*
- * init SLICE TIMER 0 
+ * init SLICE TIMER 0
  * all  = 32.538 sec = 30.736mHz
  * BYT0 = 127.1ms/tick = 7.876Hz   offset 0
  * BYT1 = 496.5us/tick = 2.014kHz  offset 1
@@ -86,16 +91,16 @@ void init_gpio(void)
 	 * configure all four 547x GPIO module DMA pins:
 	 *
 	 * /DACK1 - DMA acknowledge 1
- 	 * /DACK0 - DMA acknowledge 0
- 	 * /DREQ1 - DMA request 1
- 	 * /DREQ0 - DMA request 0
- 	 *
+	 * /DACK0 - DMA acknowledge 0
+	 * /DREQ1 - DMA request 1
+	 * /DREQ0 - DMA request 0
+	 *
 	 * for DMA operation
 	 */
-	MCF_PAD_PAR_DMA = MCF_PAD_PAR_DMA_PAR_DACK0(0b11) |
-			MCF_PAD_PAR_DMA_PAR_DACK1(0b11) |
-			MCF_PAD_PAR_DMA_PAR_DREQ1(0b11) |
-			MCF_PAD_PAR_DMA_PAR_DREQ0(0b11);
+	MCF_PAD_PAR_DMA = MCF_PAD_PAR_DMA_PAR_DACK0(0x3) |
+			MCF_PAD_PAR_DMA_PAR_DACK1(0x3) |
+			MCF_PAD_PAR_DMA_PAR_DREQ1(0x3) |
+			MCF_PAD_PAR_DMA_PAR_DREQ0(0x3);
 
 	/*
 	 * configure FEC0 pin assignment on GPIO module as FEC0
@@ -204,20 +209,6 @@ void init_gpio(void)
 						MCF_PAD_PAR_TIMER_PAR_TOUT3 |
 						MCF_PAD_PAR_TIMER_PAR_TIN2(MCF_PAD_PAR_TIMER_PAR_TIN2_IRQ2) |
 						MCF_PAD_PAR_TIMER_PAR_TOUT2;
-
-#if defined(MACHINE_FIREBEE)
-	/*
-	 * Configure GPIO FEC1L port directions (needed to load FPGA configuration)
-	 */
-	MCF_GPIO_PDDR_FEC1L = 0 |								/* bit 7 = input */
-						  0	|								/* bit 6 = input */
-						  0 | 								/* bit 5 = input */
-						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L4 |	/* bit 4 = LED => output */
-						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L3 |	/* bit 3 = PRG_DQ0 => output */
-						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L2 |	/* bit 2 = FPGA_CONFIG => output */
-						  MCF_GPIO_PDDR_FEC1L_PDDR_FEC1L1 |	/* bit 1 = PRG_CLK (FPGA) => output */
-						  0;								/* bit 0 => input */
-#endif /* MACHINE_FIREBEE */
 }
 
 /*
@@ -427,27 +418,27 @@ void init_fbcs()
 #if MACHINE_FIREBEE /* FBC setup for FireBee */
 	MCF_FBCS1_CSAR = 0xFFF00000;			/* ATARI I/O ADRESS */
 	MCF_FBCS1_CSCR = MCF_FBCS_CSCR_PS_16	/* 16BIT PORT */
-	    | MCF_FBCS_CSCR_WS(8)				/* DEFAULT 8WS */
-	    | MCF_FBCS_CSCR_AA;					/* AA */
+		| MCF_FBCS_CSCR_WS(8)				/* DEFAULT 8WS */
+		| MCF_FBCS_CSCR_AA;					/* AA */
 	MCF_FBCS1_CSMR = MCF_FBCS_CSMR_BAM_1M | MCF_FBCS_CSMR_V;
 
 	MCF_FBCS2_CSAR = 0xF0000000;			// NEUER I/O ADRESS-BEREICH
 	MCF_FBCS2_CSCR = MCF_FBCS_CSCR_PS_32	// 32BIT PORT
-	    | MCF_FBCS_CSCR_WS(8)				// DEFAULT 4WS
-	    | MCF_FBCS_CSCR_AA;					// AA
+		| MCF_FBCS_CSCR_WS(8)				// DEFAULT 4WS
+		| MCF_FBCS_CSCR_AA;					// AA
 	MCF_FBCS2_CSMR = (MCF_FBCS_CSMR_BAM_128M	// F000'0000-F7FF'FFFF
 			  | MCF_FBCS_CSMR_V);
 
 	MCF_FBCS3_CSAR = 0xF8000000;			// NEUER I/O ADRESS-BEREICH
 	MCF_FBCS3_CSCR = MCF_FBCS_CSCR_PS_16	// 16BIT PORT
-	    | MCF_FBCS_CSCR_AA;	// AA 
+		| MCF_FBCS_CSCR_AA;	// AA
 	MCF_FBCS3_CSMR = (MCF_FBCS_CSMR_BAM_64M	// F800'0000-FBFF'FFFF
 			  | MCF_FBCS_CSMR_V);
 
 	MCF_FBCS4_CSAR = 0x40000000;			// VIDEO RAM BEREICH, #FB_CS3 WIRD NICHT BENÜTZT, DECODE DIREKT AUF DEM FPGA
 	MCF_FBCS4_CSCR = MCF_FBCS_CSCR_PS_32	// 32BIT PORT
-	    | MCF_FBCS_CSCR_BSTR				// BURST READ ENABLE
-	    | MCF_FBCS_CSCR_BSTW;				// BURST WRITE ENABLE
+		| MCF_FBCS_CSCR_BSTR				// BURST READ ENABLE
+		| MCF_FBCS_CSCR_BSTW;				// BURST WRITE ENABLE
 	MCF_FBCS4_CSMR = MCF_FBCS_CSMR_BAM_1G	// 4000'0000-7FFF'FFFF
 			  | MCF_FBCS_CSMR_V;
 #elif MACHINE_M5484LITE
@@ -462,7 +453,7 @@ void init_fbcs()
 		| MCF_FBCS_CSCR_WS(32)
 		| MCF_FBCS_CSCR_ASET(1)
 		| MCF_FBCS_CSCR_AA;
-	MCF_FBCS5_CSMR = MCF_FBCS_CSMR_BAM_256M 
+	MCF_FBCS5_CSMR = MCF_FBCS_CSMR_BAM_256M
 		| MCF_FBCS_CSMR_V;
 #endif /* MACHINE_FIREBEE */
 
@@ -580,7 +571,7 @@ void init_video_ddr(void) {
 /*
  * probe for NEC compatible USB host controller and install if found
  */
-void init_usb(void) 
+void init_usb(void)
 {
 	extern struct pci_device_id ohci_usb_pci_table[];
 	extern struct pci_device_id ehci_usb_pci_table[];
@@ -666,18 +657,20 @@ static bool i2c_bus_free(void)
 /*
  * TFP410 (DVI) on
  */
-void dvi_on(void) {
+void dvi_on(void)
+{
 	uint8_t receivedByte;
 	uint8_t dummyByte; /* only used for a dummy read */
 	int num_tries = 0;
-	
+
 	xprintf("DVI digital video output initialization: ");
 
 	MCF_I2C_I2FDR = 0x3c;		/* divide system clock by 1280: 100kHz standard */
 
-	do {
+	do
+	{
 		/* disable all i2c interrupt routing targets */
-		MCF_I2C_I2ICR = 0x0; //~(MCF_I2C_I2ICR_IE | MCF_I2C_I2ICR_RE | MCF_I2C_I2ICR_TE | MCF_I2C_I2ICR_BNBE);
+		MCF_I2C_I2ICR = 0x0;	// ~(MCF_I2C_I2ICR_IE | MCF_I2C_I2ICR_RE | MCF_I2C_I2ICR_TE | MCF_I2C_I2ICR_BNBE);
 
 		/* disable i2c, disable i2c interrupts, slave, receive, i2c = acknowledge, no repeat start */
 		MCF_I2C_I2CR = 0x0;
@@ -814,16 +807,16 @@ void init_ac97(void) {
 	int va;
 	int vb;
 	int vc;
-	
+
 	xprintf("AC97 sound chip initialization: ");
 	MCF_PAD_PAR_PSC2 = MCF_PAD_PAR_PSC2_PAR_RTS2_RTS	// PSC2=TX,RX BCLK,CTS->AC'97
-	       | MCF_PAD_PAR_PSC2_PAR_CTS2_BCLK
+		   | MCF_PAD_PAR_PSC2_PAR_CTS2_BCLK
 			 | MCF_PAD_PAR_PSC2_PAR_TXD2
 			 | MCF_PAD_PAR_PSC2_PAR_RXD2;
 	MCF_PSC2_PSCMR1 = 0x0;
 	MCF_PSC2_PSCMR2 = 0x0;
 	MCF_PSC2_PSCIMR = 0x0300;
-	MCF_PSC2_PSCSICR = 0x03;	//AC97           
+	MCF_PSC2_PSCSICR = 0x03;	//AC97
 	MCF_PSC2_PSCRFCR = 0x0f000000;
 	MCF_PSC2_PSCTFCR = 0x0f000000;
 	MCF_PSC2_PSCRFAR = 0x00F0;
@@ -844,7 +837,7 @@ void init_ac97(void) {
 		{
 			MCF_PSC2_PSCTB_AC97 = 0x0;	//SLOT2-12:WR REG ALLES 0
 		}
-		
+
 		// read register
 		MCF_PSC2_PSCTB_AC97 = 0xc0000000;	//START SLOT1 + SLOT2, FIRST FRAME
 		MCF_PSC2_PSCTB_AC97 = 0x82000000;	//SLOT1:master volume
@@ -854,7 +847,7 @@ void init_ac97(void) {
 			MCF_PSC2_PSCTB_AC97 = 0x00000000;	//SLOT2-12:RD REG ALLES 0
 		}
 		wait(50);
-		
+
 		va = MCF_PSC2_PSCTB_AC97;
 		if ((va & 0x80000fff) == 0x80000800) {
 			vb = MCF_PSC2_PSCTB_AC97;
@@ -958,10 +951,10 @@ void initialize_hardware(void)
 		* (volatile uint32_t *) 0x43a = 0x237698aa;	/* memval2 TOS system variable */
 		* (volatile uint32_t *) 0x51a = 0x5555aaaa;	/* memval3 TOS system variable */
 
-	    /* TT-RAM */
+		/* TT-RAM */
 
-	    * (uint32_t *) 0x5a4 = FASTRAM_END; /* ramtop TOS system variable */
-	    * (uint32_t *) 0x5a8 = 0x1357bd13;  /* ramvalid TOS system variable */
+		* (uint32_t *) 0x5a4 = FASTRAM_END; /* ramtop TOS system variable */
+		* (uint32_t *) 0x5a8 = 0x1357bd13;  /* ramvalid TOS system variable */
 
 		/* Jump into FireTOS */
 		typedef void void_func(void);
@@ -974,7 +967,7 @@ void initialize_hardware(void)
 	init_serial();
 
 	xprintf("\n\n");
-	xprintf("%s BASIS system (BaS) v %d.%d (%s, %s)\r\n\r\n", 
+	xprintf("%s BASIS system (BaS) v %d.%d (%s, %s)\r\n\r\n",
 #if MACHINE_FIREBEE
 	"Firebee"
 #elif MACHINE_M5484LITE
@@ -1052,7 +1045,7 @@ void initialize_hardware(void)
 	/*
 	 * Determine the processor revision
 	 */
-	xprintf(" (revision %d)\r\n",((MCF_SIU_JTAGID & MCF_SIU_JTAGID_REV) >> 28));
+	xprintf(" (revision %d)\r\n", ((MCF_SIU_JTAGID & MCF_SIU_JTAGID_REV) >> 28));
 
 	init_slt();
 	init_fbcs();
@@ -1090,6 +1083,7 @@ void initialize_hardware(void)
 
 	/* the following only makes sense _after_ DDRAM has been initialized */
 	clear_bss_segment();
+	xprintf(".bss segment cleared\r\n");
 
 	if (BAS_LMA != BAS_IN_RAM)
 	{
@@ -1103,39 +1097,17 @@ void initialize_hardware(void)
 #if MACHINE_FIREBEE
 	if (coldboot) /* does not work with BDM */
 		;
-	init_fpga();
+	fpga_configured = init_fpga();
 
 	init_pll();
 	init_video_ddr();
 	dvi_on();
 
-#ifdef _NOT_USED_ 
-	/* experimental */
-	{
-		int i;
-		uint32_t *scradr = (uint32_t *) 0xd00000;
-
-		for (i = 0; i < 100; i++)
-		{
-			uint32_t *p = scradr;
-
-			for (p = scradr; p < scradr + 1024 * 150L; p++)
-			{
-				*p = 0xffffffff;
-			}
-			for (p = scradr; p < scradr + 1024 * 150L; p++)
-			{
-				*p = 0x0;
-			}
-		}
-	}
-#endif /* _NOT_USED_ */
-
 #endif /* MACHINE_FIREBEE */
 	driver_mem_init();
 	init_pci();
 	video_init();
-	
+
 	/* do not try to init USB for now on the Firebee, it hangs the machine */
 #ifndef MACHINE_FIREBEE
 	//init_usb();

usb/usb_mouse.c

@@ -48,7 +48,7 @@ static int usb_mouse_probe(struct usb_device *dev, unsigned int ifnum);
 int usb_mouse_deregister(struct usb_device *dev)
 {
 	dev->irq_handle = NULL;
-	if(new != NULL)
+	if (new != NULL)
 	{
 		driver_mem_free(new);
 		new = NULL;
@@ -61,8 +61,9 @@ int usb_mouse_deregister(struct usb_device *dev)
 /* registering the mouse */
 int usb_mouse_register(struct usb_device *dev)
 {
-	if(!mouse_installed && (dev->devnum != -1) && (usb_mouse_probe(dev, 0) == 1))
-	{ /* Ok, we found a mouse */
+	if (!mouse_installed && (dev->devnum != -1) && (usb_mouse_probe(dev, 0) == 1))
+	{
+		/* Ok, we found a mouse */
 		mse_printf("USB MOUSE found (USB: %d, devnum: %d)\r\n", dev->usbnum, dev->devnum);
 		mouse_installed = 1;
 		dev->deregister = usb_mouse_deregister;
@@ -76,12 +77,12 @@ int usb_mouse_register(struct usb_device *dev)
 int drv_usb_mouse_init(void)
 {
 	int i, j;
-	if(mouse_installed)
+	if (mouse_installed)
 		return -1;
 	/* scan all USB Devices */
-	for(j = 0; j < USB_MAX_BUS; j++)
+	for (j = 0; j < USB_MAX_BUS; j++)
 	{
-		for(i = 0; i < USB_MAX_DEVICE; i++)
+		for (i = 0; i < USB_MAX_DEVICE; i++)
 		{
 			struct usb_device *dev = usb_get_dev_index(i, j); /* get device */
 			if (dev == NULL)
@@ -109,27 +110,27 @@ static int usb_mouse_irq(struct usb_device *dev)
 	int level;
 #endif
 	int i, change = 0;
-	if((dev->irq_status != 0) || (dev->irq_act_len < 3) || (dev->irq_act_len > 8))
+	if ((dev->irq_status != 0) || (dev->irq_act_len < 3) || (dev->irq_act_len > 8))
 	{
 		mse_printf("USB MOUSE error %lX, len %d\r\n", dev->irq_status, dev->irq_act_len);
 		return 1;
 	}
-	for(i = 0; i < dev->irq_act_len; i++)
+	for (i = 0; i < dev->irq_act_len; i++)
 	{
-		if(new[i] != old[i])
+		if (new[i] != old[i])
 		{
 			change = 1;
 			break;
 		}
 	}
-	if(change)
+	if (change)
 	{
 		char wheel = 0, buttons, old_buttons;
 		mse_printf("USB MOUSE len:%d %02X %02X %02X %02X %02X %02X\r\n", dev->irq_act_len, new[0], new[1], new[2], new[3], new[4], new[5]);
 #ifdef CONFIG_USB_INTERRUPT_POLLING
 		level = set_ipl(7); /* mask interrupts */
 #endif
-		if((dev->irq_act_len >= 6) && (new[0] == 1)) /* report-ID */
+		if ((dev->irq_act_len >= 6) && (new[0] == 1)) /* report-ID */
 		{
 			buttons = new[1];
 			old_buttons = old[1];
@@ -143,24 +144,24 @@ static int usb_mouse_irq(struct usb_device *dev)
 			buttons = new[0];
 			old_buttons = old[0];
 			new[0] = ((new[0] & 1) << 1) + ((new[0] & 2) >> 1) + 0xF8;
-			if(dev->irq_act_len >= 3)
+			if (dev->irq_act_len >= 3)
 				wheel = new[3];
 		}
-		if((buttons ^ old_buttons) & 4) /* 3rd button */
+		if ((buttons ^ old_buttons) & 4) /* 3rd button */
 		{
-		  if(buttons & 4)
+		  if (buttons & 4)
 		  {
 				usb_kbd_send_code(0x72); /* ENTER */
 				usb_kbd_send_code(0xF2);
 			}
 		}
-		if(wheel != 0) /* actually like Eiffel */
+		if (wheel != 0) /* actually like Eiffel */
 		{
 #define REPEAT_WHEEL 3
 			int i;
-			if(wheel > 0)
+			if (wheel > 0)
 			{
-				for(i = 0; i < REPEAT_WHEEL; i++)
+				for (i = 0; i < REPEAT_WHEEL; i++)
 				{
 					usb_kbd_send_code(0x48); /* UP */
 					usb_kbd_send_code(0xC8);
@@ -168,7 +169,7 @@ static int usb_mouse_irq(struct usb_device *dev)
 			}
 			else
 			{
-				for(i = 0; i < REPEAT_WHEEL; i++)
+				for (i = 0; i < REPEAT_WHEEL; i++)
 				{
 					usb_kbd_send_code(0x50); /* DOWN */
 					usb_kbd_send_code(0xD0);
@@ -197,24 +198,24 @@ static int usb_mouse_probe(struct usb_device *dev, unsigned int ifnum)
 	struct usb_interface_descriptor *iface;
 	struct usb_endpoint_descriptor *ep;
 	int pipe, maxp;
-	if(dev->descriptor.bNumConfigurations != 1)
+	if (dev->descriptor.bNumConfigurations != 1)
 		return 0;
 	iface = &dev->config.if_desc[ifnum];
-	if(iface->bInterfaceClass != 3)
+	if (iface->bInterfaceClass != 3)
 		return 0;
-	if(iface->bInterfaceSubClass != 1)
+	if (iface->bInterfaceSubClass != 1)
 		return 0;
-	if(iface->bInterfaceProtocol != 2)
+	if (iface->bInterfaceProtocol != 2)
 		return 0;
-	if(iface->bNumEndpoints != 1)
+	if (iface->bNumEndpoints != 1)
 		return 0;
 	ep = &iface->ep_desc[0];
-	if(!(ep->bEndpointAddress & 0x80))
+	if (!(ep->bEndpointAddress & 0x80))
 		return 0;
-	if((ep->bmAttributes & 3) != 3)
+	if ((ep->bmAttributes & 3) != 3)
 		return 0;
 	new = (unsigned char *)driver_mem_alloc(8);
-	if(new == NULL)
+	if (new == NULL)
 		return 0;
 	mse_printf("USB MOUSE found set protocol...\r\n");
 	/* ok, we found a USB Mouse, install it */

util/bas_string.c

@@ -55,14 +55,14 @@ void *memset(void *s, int c, size_t n)
 }
 
 
-int memcmp(const char *s1, const char *s2, size_t max)
+int memcmp(const void *s1, const void *s2, size_t max)
 {
 	int i;
 	int cmp;
 
 	for (i = 0; i < max; i++)
 	{
-		cmp = (*s1 - *s2);
+        cmp = (* (const char *) s1 - * (const char *) s2);
 		if (cmp != 0) return cmp;
 	}
 	return cmp;
@@ -75,7 +75,7 @@ int strcmp(const char *s1, const char *s2)
 
 	for (i = 0; *s1++ && *s2++; i++)
 	{
-		cmp * (*s1 - *s2);
+		cmp = (*s1 - *s2);
 		if (cmp != 0) return cmp;
 	}
 	return cmp;

util/printf_helper.S

@@ -34,3 +34,5 @@ printf_helper:
 			lea			__MBAR+0x860C,a0	// PSCSTB0 transmitter buffer register
 			move.b		d0,(a0)				// send byte
 			rts
+
+// vim: set syntax=asm68k :

util/wait.c

@@ -27,5 +27,43 @@
 
 #include <stdint.h>
 #include <MCF5475.h>
-
 #include <wait.h>
+
+uint32_t get_timer(void)
+{
+	return MCF_SLT_SCNT(0);
+}
+/*
+ * wait for the specified number of us on slice timer 0. Replaces the original routines that had
+ * the number of useconds to wait for hardcoded in their name.
+ */
+void wait(uint32_t us)
+{
+	int32_t target = MCF_SLT_SCNT(0) - (us * (SYSCLK / 1000));
+
+	while (MCF_SLT_SCNT(0) - target > 0);
+}
+
+/*
+ * same as above, but with milliseconds wait time
+ */
+void wait_ms(uint32_t ms)
+{
+	wait(ms * 1000);
+}
+/*
+ * the same as above, with a checker function which gets called while
+ * busy waiting and allows for an early return if it returns true
+ */
+bool waitfor(uint32_t us, checker_func condition)
+{
+	int32_t target = MCF_SLT_SCNT(0) - (us * (SYSCLK / 1000));
+	bool res;
+
+	do
+	{
+		if ((res = (*condition)()))
+			return res;
+	} while (MCF_SLT_SCNT(0) - target > 0);
+	return false;
+}

xhdi/xhdi_vec.S

@@ -61,3 +61,5 @@ _xhdi_sd_install:
 		move.l	#_xhdi_vec,d0	// return our BaS vector to TOS
 		move.l	d0,a0			//
 		rte
+
+// vim: set syntax=asm68k :