Initial import for store (USB experimental project for mass storage)

usb/store/readme.txt

@@ -0,0 +1,68 @@
+This application allows you to mount an USB mass storage device though 
+the Ethernat hardware or the Aranym USB Natfeat, read or copy files from/to this device.
+It's derived from the work done by Didier Mequignon for FireTOS.
+
+This is still quite experimental so i am not responsable for any data loss
+or corruption, play with it at your own risk. Please backup your data ;-)
+
+**** Binaries ****
+
+stor_etn.tos ---> EtherNat
+stor_ara.tos ---> Aranym
+stor_ntu.tos ---> NetUSBee
+stor_pci.tos ---> PCI-OHCI
+
+Note that NetUSBee and PCI-OHCI don't work yet
+
+**** How it works *****
+
+Depending on your hardware run stor_etn.tos or stor_ara.tos application from your desktop,
+if everything goes well you can use the "install partition" option in your desktop menu to 
+access the new partitions.
+
+It has been tested it under CT060 TOS and MiNT 1.16.3.
+Teted in Aranym with MiNT 1.17.0 beta and TOS 4.04.
+
+**** Limits/Problems *****
+
+- The supported partitions are the supported partitions by the OS.
+It has been tested with FAT16 in TOS4.04, with FAT16, FAT32 and ext2 with MiNT.
+
+- There is still no handle for mounting/unmounting partitions. Neither detection for
+devices already plugged, so when you mount one device you can't unmount it.
+If you run the application several times with the same USB stick plugged, it
+will mount the device again as a new different logical partition.
+
+- It's VERY VERY slow, for now the transfer rate it's quite ridiculous. I hope
+to solve this soon. Under Aranym it can be better.
+
+- I don't think that it works together with umouse from Jan Thomas.
+
+- This is only a start don't expect too much.
+
+- Thing desktop crashes when inquiring to show info about the device.
+
+For feedback, suggestions or tips mail me at dgalvez75@gmail.com
+
+**** Histoy ****
+* 5/10/2010 (alfa 05)
+ - XHDI working (assembler version).
+ - Under MiNT FAT32 and ext2 partitions can be accesed.
+ - Introduced NetUSBee sources (not working yet)
+ - Introduced OHCI-PCI sources (to be tested)
+* 27/8/2010 (alfa 04)
+ - Start XHDI translation to C.
+ - Support for Aranym HCD.
+* 19/5/2010 (alfa 03)
+ - Killed a bug that could produce some corruption in the pun_info struct.
+* 26/4/2010 (alfa 02) 
+ - Under MiNT if the number of partitions was greater than 16, the driver wasn't installed.
+ - Wait for a key pess before retuning the desktop under TOS when driver is loaded.
+ - Resolved big bug that produced that data written/read above the first 16 MB to be corrupted.
+* 1/3/2010 (alfa 01)
+ - Initial release 
+
+David Galvez 	05/10/2010
+Version: alfa 05
+ 
+