Author SHA1 Message Date
DavidGZ 23f23bd70c Create README.md 2018-04-09 09:57:02 +02:00
torlus d2a3f1f4ff IP migration and cleanup - again 2018-04-06 19:07:31 +02:00
torlus 923b18b2d3 better reupload the whole thing :/ 2018-04-06 19:07:31 +02:00
torlus 84f029b1fc IP migration and cleanup 2018-04-06 19:07:31 +02:00
torlus e6da46a57f video.v fixed (wrong version) 2018-04-06 19:07:30 +02:00
torlus 3b80809684 First full HDL version 2018-04-06 19:07:30 +02:00
528 changed files with 130665 additions and 18996 deletions
-52
View File
@@ -1,52 +0,0 @@
library ieee;
use ieee.std_logic_1164.all;
-- Entity Declaration
entity dsp is
port
(
CLK33M : in std_logic;
MAIN_CLK : in std_logic;
nFB_OE : in std_logic;
nFB_WR : in std_logic;
nFB_CS1 : in std_logic;
nFB_CS2 : in std_logic;
FB_SIZE0 : in std_logic;
FB_SIZE1 : in std_logic;
nFB_BURST : in std_logic;
FB_ADR : in std_logic_vector(31 downto 0);
nRSTO : in std_logic;
nFB_CS3 : in std_logic;
nSRCS : inout std_logic;
nSRBLE : out std_logic;
nSRBHE : out std_logic;
nSRWE : out std_logic;
nSROE : out std_logic;
DSP_INT : out std_logic;
DSP_TA : out std_logic;
fb_ad_in : in std_logic_vector(31 downto 0);
fb_ad_out : out std_logic_vector(31 downto 0);
IO : inout std_logic_vector(17 downto 0);
SRD : inout std_logic_vector(15 downto 0)
);
end dsp;
-- Architecture Body
architecture rtl of dsp is
begin
nSRCS <= '0' when nFB_CS2 = '0' and FB_ADR(27 downto 24) = x"4" else '1'; --nFB_CS3;
nSRBHE <= '0' when FB_ADR(0 downto 0) = "0" else '1';
nSRBLE <= '1' when FB_ADR(0 downto 0) = "0" and FB_SIZE1 = '0' and FB_SIZE0 = '1' else '0';
nSRWE <= '0' when nFB_WR = '0' and nSRCS = '0' and MAIN_CLK = '0' else '1';
nSROE <= '0' when nFB_OE = '0' and nSRCS = '0' else '1';
DSP_INT <= '0';
DSP_TA <= '0';
IO(17 downto 0) <= FB_ADR(18 downto 1);
SRD(15 downto 0) <= fb_ad_in(31 downto 16) when nFB_WR = '0' and nSRCS = '0' else (others => 'Z');
-- fb_ad_out(31 downto 16) <= srd(15 DOWNTO 0 )when nFB_OE = '0' AND nSRCS = '0' ELSE (others => 'Z');
fb_ad_out(31 downto 0) <= (others => 'Z'); -- otherwise we get a constant driver error
end rtl;
File diff suppressed because it is too large Load Diff
@@ -1,432 +0,0 @@
----------------------------------------------------------------------
---- ----
---- 6850 compatible IP Core ----
---- ----
---- This file is part of the SUSKA ATARI clone project. ----
---- http://www.experiment-s.de ----
---- ----
---- Description: ----
---- UART 6850 compatible IP core ----
---- ----
---- 6850's receiver unit. ----
---- ----
---- ----
---- To Do: ----
---- - ----
---- ----
---- Author(s): ----
---- - Wolfgang Foerster, wf@experiment-s.de; wf@inventronik.de ----
---- ----
----------------------------------------------------------------------
---- ----
---- Copyright (C) 2006 - 2008 Wolfgang Foerster ----
---- ----
---- This source file may be used and distributed without ----
---- restriction provided that this copyright statement is not ----
---- removed from the file and that any derivative work contains ----
---- the original copyright notice and the associated disclaimer. ----
---- ----
---- This source file is free software; you can redistribute it ----
---- and/or modify it under the terms of the GNU Lesser General ----
---- Public License as published by the Free Software Foundation; ----
---- either version 2.1 of the License, or (at your option) any ----
---- later version. ----
---- ----
---- This source is distributed in the hope that it will be ----
---- useful, but WITHOUT ANY WARRANTY; without even the implied ----
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ----
---- PURPOSE. See the GNU Lesser General Public License for more ----
---- details. ----
---- ----
---- You should have received a copy of the GNU Lesser General ----
---- Public License along with this source; if not, download it ----
---- from http://www.gnu.org/licenses/lgpl.html ----
---- ----
----------------------------------------------------------------------
--
-- Revision History
--
-- Revision 2K6A 2006/06/03 WF
-- Initial Release.
-- Revision 2K6B 2006/11/07 WF
-- Modified Source to compile with the Xilinx ISE.
-- Revision 2K8A 2008/07/14 WF
-- Minor changes.
--
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.std_logic_unsigned.ALL;
ENTITY WF6850IP_RECEIVE IS
PORT
(
CLK : IN std_logic;
RESETn : IN bit;
MCLR : IN bit;
CS : IN bit_vector(2 DOWNTO 0);
E : IN bit;
RWn : IN bit;
RS : IN bit;
DATA_OUT : OUT bit_vector(7 DOWNTO 0);
DATA_EN : OUT bit;
WS : IN bit_vector(2 DOWNTO 0);
CDS : IN bit_vector(1 DOWNTO 0);
RXCLK : IN bit;
RXDATA : IN bit;
RDRF : BUFFER bit;
OVR : OUT bit;
PE : OUT bit;
FE : OUT bit
);
END ENTITY WF6850IP_RECEIVE;
ARCHITECTURE rtl OF WF6850IP_RECEIVE IS
TYPE RCV_STATES IS (IDLE, WAIT_START, SAMPLE, PARITY, STOP1, STOP2, SYNC);
SIGNAL RCV_STATE, RCV_NEXT_STATE : RCV_STATES;
SIGNAL RXDATA_I : bit;
SIGNAL RXDATA_S : bit;
SIGNAL DATA_REG : bit_vector(7 DOWNTO 0);
SIGNAL SHIFT_REG : bit_vector(7 DOWNTO 0);
SIGNAL CLK_STRB : bit;
SIGNAL BITCNT : std_logic_vector(2 DOWNTO 0);
BEGIN
p_sample : PROCESS(CLK)
-- This filter provides a synchronisation to the system
-- clock, even for random baud rates of the received data
-- stream.
VARIABLE FLT_TMP : integer RANGE 0 TO 2;
BEGIN
IF rising_edge(CLK) THEN
--
RXDATA_I <= RXDATA;
--
IF RXDATA_I = '1' and FLT_TMP < 2 THEN
FLT_TMP := FLT_TMP + 1;
ELSIF RXDATA_I = '1' THEN
RXDATA_S <= '1';
ELSIF RXDATA_I = '0' and FLT_TMP > 0 THEN
FLT_TMP := FLT_TMP - 1;
ELSIF RXDATA_I = '0' THEN
RXDATA_S <= '0';
END IF;
END IF;
END PROCESS p_sample;
clkdiv : PROCESS(CLK)
VARIABLE CLK_LOCK : boolean;
VARIABLE STRB_LOCK : boolean;
VARIABLE CLK_DIVCNT : std_logic_vector(6 DOWNTO 0);
BEGIN
IF rising_edge(CLK) THEN
IF CDS = "00" THEN -- Divider off.
IF RXCLK = '1' and STRB_LOCK = false THEN
CLK_STRB <= '1';
STRB_LOCK := true;
ELSIF RXCLK = '0' THEN
CLK_STRB <= '0';
STRB_LOCK := false;
ELSE
CLK_STRB <= '0';
END IF;
ELSIF RCV_STATE = IDLE THEN
-- Preset the CLKDIV with the start delays.
IF CDS = "01" THEN
CLK_DIVCNT := "0001000"; -- Half of div by 16 mode.
ELSIF CDS = "10" THEN
CLK_DIVCNT := "0100000"; -- Half of div by 64 mode.
END IF;
CLK_STRB <= '0';
ELSE
IF CLK_DIVCNT > "0000000" and RXCLK = '1' and CLK_LOCK = false THEN
CLK_DIVCNT := CLK_DIVCNT - '1';
CLK_STRB <= '0';
CLK_LOCK := true;
ELSIF CDS = "01" and CLK_DIVCNT = "0000000" THEN
CLK_DIVCNT := "0010000"; -- Div by 16 mode.
--
IF STRB_LOCK = false THEN
STRB_LOCK := true;
CLK_STRB <= '1';
ELSE
CLK_STRB <= '0';
END IF;
ELSIF CDS = "10" and CLK_DIVCNT = "0000000" THEN
CLK_DIVCNT := "1000000"; -- Div by 64 mode.
IF STRB_LOCK = false THEN
STRB_LOCK := true;
CLK_STRB <= '1';
ELSE
CLK_STRB <= '0';
END IF;
ELSIF RXCLK = '0' THEN
CLK_LOCK := false;
STRB_LOCK := false;
CLK_STRB <= '0';
ELSE
CLK_STRB <= '0';
END IF;
END IF;
END IF;
END PROCESS clkdiv;
datareg : PROCESS(RESETn, CLK)
BEGIN
IF RESETn = '0' or MCLR = '1' THEN
DATA_REG <= x"00";
ELSE
IF rising_edge(CLK) THEN
IF RCV_STATE = SYNC and WS(2) = '0' and RDRF = '0' THEN -- 7 bit data.
-- Transfer from shift- to data register only if
-- data register is empty (RDRF = '0').
DATA_REG <= '0' & SHIFT_REG(7 downto 1);
ELSIF RCV_STATE = SYNC and WS(2) = '1' and RDRF = '0' THEN -- 8 bit data.
-- Transfer from shift- to data register only if
-- data register is empty (RDRF = '0').
DATA_REG <= SHIFT_REG;
END IF;
END IF;
END IF;
END PROCESS datareg;
DATA_OUT <= DATA_REG WHEN CS = "011" and RWn = '1' and RS = '1' ELSE (OTHERS => '0');
DATA_EN <= '1' WHEN CS = "011" and RWn = '1' and RS = '1' ELSE '0';
shiftreg : PROCESS(RESETn, CLK)
BEGIN
IF RESETn = '0' or MCLR = '1' THEN
SHIFT_REG <= x"00";
ELSE
IF rising_edge(CLK) THEN
IF RCV_STATE = SAMPLE and CLK_STRB = '1' THEN
SHIFT_REG <= RXDATA_S & SHIFT_REG(7 DOWNTO 1); -- Shift right.
END IF;
END IF;
END IF;
END PROCESS shiftreg;
p_bitcnt : PROCESS(CLK)
BEGIN
IF rising_edge(CLK) THEN
IF RCV_STATE = SAMPLE and CLK_STRB = '1' THEN
BITCNT <= BITCNT + '1';
ELSIF RCV_STATE /= SAMPLE THEN
BITCNT <= (OTHERS => '0');
END IF;
END IF;
END PROCESS p_bitcnt;
p_frame_err: PROCESS(RESETn, CLK)
-- This module detects a framing error
-- during stop bit 1 and stop bit 2.
VARIABLE FE_I: bit;
BEGIN
IF RESETn = '0' THEN
FE_I := '0';
FE <= '0';
ELSE
IF rising_edge(CLK) THEN
IF MCLR = '1' THEN
FE_I := '0';
FE <= '0';
ELSIF CLK_STRB = '1' THEN
IF RCV_STATE = STOP1 and RXDATA_S = '0' THEN
FE_I := '1';
ELSIF RCV_STATE = STOP2 and RXDATA_S = '0' THEN
FE_I := '1';
ELSIF RCV_STATE = STOP1 or RCV_STATE = STOP2 THEN
FE_I := '0'; -- Error resets when correct data appears.
END IF;
END IF;
IF RCV_STATE = SYNC THEN
FE <= FE_I; -- Update the FE every SYNC time.
END IF;
END IF;
END IF;
END PROCESS p_frame_err;
p_overrun : PROCESS(RESETn, CLK)
VARIABLE OVR_I : bit;
VARIABLE FIRST_READ : boolean;
BEGIN
IF rising_edge(CLK) THEN
IF RESETn = '0' or MCLR = '1' THEN
OVR_I := '0';
OVR <= '0';
FIRST_READ := false;
ELSE
IF CLK_STRB = '1' and RCV_STATE = STOP1 THEN
-- Overrun appears if RDRF is '1' in this state.
OVR_I := RDRF;
END IF;
IF CS = "011" and RWn = '1' and RS = '1' THEN
-- If an overrun was detected, the concerning flag is
-- set when the valid data word in the receiver data
-- register is read. Thereafter the RDRF flag is reset
-- and the overrun disappears (OVR_I goes low) after
-- a second read (in time) of the receiver data register.
IF FIRST_READ = false THEN
IF OVR_I = '1' THEN
OVR <= '1';
OVR_I := '0';
FIRST_READ := true;
ELSE
OVR <= '0';
END IF;
END IF;
ELSE
FIRST_READ := false;
END IF;
END IF;
END IF;
END PROCESS p_overrun;
p_parity_test : PROCESS(RESETn,MCLR,CLK)
VARIABLE PAR_TMP : bit;
VARIABLE PE_I : bit;
BEGIN
IF RESETn = '0' or MCLR = '1' THEN
PE <= '0';
ELSE
IF rising_edge(CLK) THEN
IF CLK_STRB = '1' THEN -- Sample parity on clock strobe.
PE_I := '0'; -- Initialise.
IF RCV_STATE = PARITY THEN
FOR i in 1 TO 7 LOOP
IF i = 1 THEN
PAR_TMP := SHIFT_REG(i - 1) xor SHIFT_REG(i);
ELSE
PAR_TMP := PAR_TMP xor SHIFT_REG(i);
END IF;
END LOOP;
IF WS = "000" or WS = "010" or WS = "110" THEN -- Even parity.
PE_I := PAR_TMP xor RXDATA_S;
ELSIF WS = "001" or WS = "011" or WS = "111" THEN -- Odd parity.
PE_I := not PAR_TMP xor RXDATA_S;
ELSE -- No parity for WS = "100" and WS = "101".
PE_I := '0';
END IF;
END IF;
END IF;
END IF;
-- Transmit the parity flag together with the data
-- In other words: no parity to the status register
-- when RDRF inhibits the data transfer to the
-- receiver data register.
IF RCV_STATE = SYNC and RDRF = '0' THEN
PE <= PE_I;
ELSIF CS = "011" and RWn = '1' and RS = '1' THEN
PE <= '0'; -- Clear when reading the data register.
END IF;
END IF;
END PROCESS p_parity_test;
p_rdrf : process(RESETn, CLK)
-- Receive data register full flag.
BEGIN
IF rising_edge(CLK) THEN
IF RESETn = '0' or MCLR = '1' THEN
RDRF <= '0';
ELSE
IF RCV_STATE = SYNC THEN
RDRF <= '1'; -- Data register is full until now!
END IF;
IF CS = "011" and RWn = '1' and RS = '1' THEN
RDRF <= '0'; -- when reading the data register ...
END IF;
END IF;
END IF;
END PROCESS p_rdrf;
p_rcv_statereg : PROCESS(RESETn, CLK)
BEGIN
IF RESETn = '0' THEN
RCV_STATE <= IDLE;
ELSE
IF rising_edge(CLK) THEN
IF MCLR = '1' THEN
RCV_STATE <= IDLE;
ELSE
RCV_STATE <= RCV_NEXT_STATE;
END IF;
END IF;
END IF;
END PROCESS p_rcv_statereg;
p_rcv_statedec : PROCESS(RCV_STATE, RXDATA_S, CDS, WS, BITCNT, CLK_STRB)
BEGIN
CASE RCV_STATE IS
WHEN IDLE =>
IF RXDATA_S = '0' and CDS = "00" THEN
RCV_NEXT_STATE <= SAMPLE; -- Startbit detected in div by 1 mode.
ELSIF RXDATA_S = '0' and CDS = "01" THEN
RCV_NEXT_STATE <= WAIT_START; -- Startbit detected in div by 16 mode.
ELSIF RXDATA_S = '0' and CDS = "10" THEN
RCV_NEXT_STATE <= WAIT_START; -- Startbit detected in div by 64 mode.
ELSE
RCV_NEXT_STATE <= IDLE; -- No startbit; sleep well :-)
END IF;
WHEN WAIT_START =>
IF CLK_STRB = '1' THEN
IF RXDATA_S = '0' THEN
RCV_NEXT_STATE <= SAMPLE; -- Start condition in no div by 1 modes.
ELSE
RCV_NEXT_STATE <= IDLE; -- No valid start condition, go back.
END IF;
ELSE
RCV_NEXT_STATE <= WAIT_START; -- Stay.
END IF;
WHEN SAMPLE =>
IF CLK_STRB = '1' THEN
IF BITCNT < "110" and WS(2) = '0' THEN
RCV_NEXT_STATE <= SAMPLE; -- Go on sampling 7 data bits.
ELSIF BITCNT < "111" and WS(2) = '1' THEN
RCV_NEXT_STATE <= SAMPLE; -- Go on sampling 8 data bits.
ELSIF WS = "100" or WS = "101" THEN
RCV_NEXT_STATE <= STOP1; -- No parity check enabled.
ELSE
RCV_NEXT_STATE <= PARITY; -- Parity enabled.
END IF;
ELSE
RCV_NEXT_STATE <= SAMPLE; -- Stay in sample mode.
END IF;
WHEN PARITY =>
IF CLK_STRB = '1' THEN
RCV_NEXT_STATE <= STOP1;
ELSE
RCV_NEXT_STATE <= PARITY;
END IF;
WHEN STOP1 =>
IF CLK_STRB = '1' THEN
IF RXDATA_S = '0' THEN
RCV_NEXT_STATE <= SYNC; -- Framing error detected.
ELSIF WS = "000" or WS = "001" or WS = "100" THEN
RCV_NEXT_STATE <= STOP2; -- Two stop bits selected.
ELSE
RCV_NEXT_STATE <= SYNC; -- One stop bit selected.
END IF;
ELSE
RCV_NEXT_STATE <= STOP1;
END IF;
WHEN STOP2 =>
IF CLK_STRB = '1' THEN
RCV_NEXT_STATE <= SYNC;
ELSE
RCV_NEXT_STATE <= STOP2;
END IF;
WHEN SYNC =>
RCV_NEXT_STATE <= IDLE;
END CASE;
END PROCESS p_rcv_statedec;
END ARCHITECTURE rtl;
File diff suppressed because it is too large Load Diff
-2
View File
@@ -1,2 +0,0 @@
# FPGA_Quartus_13.1
FireBee's FPGA developed on Quartus 13.1
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altddio_out0
PORT
(
datain_h : IN STD_LOGIC ;
datain_l : IN STD_LOGIC ;
outclock : IN STD_LOGIC ;
dataout : OUT STD_LOGIC
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altddio_out3
PORT
(
datain_h : IN STD_LOGIC ;
datain_l : IN STD_LOGIC ;
outclock : IN STD_LOGIC ;
dataout : OUT STD_LOGIC
);
end component;
-7
View File
@@ -1,7 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "ALTDDIO_OUT"
set_global_assignment -name IP_TOOL_VERSION "8.1"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "altddio_out3.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out3.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out3.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out3.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out3.ppf"]
-26
View File
@@ -1,26 +0,0 @@
--Copyright (C) 1991-2010 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altpll0
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
c1 : OUT STD_LOGIC ;
c2 : OUT STD_LOGIC ;
c3 : OUT STD_LOGIC ;
c4 : OUT STD_LOGIC
);
end component;
-25
View File
@@ -1,25 +0,0 @@
--Copyright (C) 1991-2014 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altpll1
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
c1 : OUT STD_LOGIC ;
c2 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
end component;
-26
View File
@@ -1,26 +0,0 @@
--Copyright (C) 1991-2014 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altpll2
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
c1 : OUT STD_LOGIC ;
c2 : OUT STD_LOGIC ;
c3 : OUT STD_LOGIC ;
c4 : OUT STD_LOGIC
);
end component;
-26
View File
@@ -1,26 +0,0 @@
--Copyright (C) 1991-2010 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altpll3
PORT
(
inclk0 : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
c1 : OUT STD_LOGIC ;
c2 : OUT STD_LOGIC ;
c3 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC
);
end component;
-30
View File
@@ -1,30 +0,0 @@
--Copyright (C) 1991-2014 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altpll4
PORT
(
areset : IN STD_LOGIC := '0';
configupdate : IN STD_LOGIC := '0';
inclk0 : IN STD_LOGIC := '0';
scanclk : IN STD_LOGIC := '1';
scanclkena : IN STD_LOGIC := '0';
scandata : IN STD_LOGIC := '0';
c0 : OUT STD_LOGIC ;
locked : OUT STD_LOGIC ;
scandataout : OUT STD_LOGIC ;
scandone : OUT STD_LOGIC
);
end component;
-38
View File
@@ -1,38 +0,0 @@
--Copyright (C) 1991-2010 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altpll_reconfig1
PORT
(
clock : IN STD_LOGIC ;
counter_param : IN STD_LOGIC_VECTOR (2 DOWNTO 0);
counter_type : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
data_in : IN STD_LOGIC_VECTOR (8 DOWNTO 0);
pll_areset_in : IN STD_LOGIC := '0';
pll_scandataout : IN STD_LOGIC ;
pll_scandone : IN STD_LOGIC ;
read_param : IN STD_LOGIC ;
reconfig : IN STD_LOGIC ;
reset : IN STD_LOGIC ;
write_param : IN STD_LOGIC ;
busy : OUT STD_LOGIC ;
data_out : OUT STD_LOGIC_VECTOR (8 DOWNTO 0);
pll_areset : OUT STD_LOGIC ;
pll_configupdate : OUT STD_LOGIC ;
pll_scanclk : OUT STD_LOGIC ;
pll_scanclkena : OUT STD_LOGIC ;
pll_scandata : OUT STD_LOGIC
);
end component;
-12
View File
@@ -1,12 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<pin_planner>
<pin_info>
</pin_info>
<buses>
</buses>
<group_file_association>
</group_file_association>
<pin_planner_file_specifies>
</pin_planner_file_specifies>
</pin_planner>
-238
View File
@@ -1,238 +0,0 @@
#--------------------------------------------------------------#
# #
# Synopsis design constraints for the Firebee project #
# #
# This file is part of the Firebee ACP project. #
# http://www.firebee.org #
# #
# Description: #
# timing constraints for the Firebee VHDL config #
# #
# #
# #
# To Do: #
# - #
# #
# Author(s): #
# Markus Fröschle, mfro@mubf.de #
# #
#--------------------------------------------------------------#
# #
# Copyright (C) 2015 Markus Fröschle & the ACP project #
# #
# This source file may be used and distributed without #
# restriction provided that this copyright statement is not #
# removed from the file and that any derivative work contains #
# the original copyright notice and the associated disclaimer. #
# #
# This source file is free software; you can redistribute it #
# and/or modify it under the terms of the GNU Lesser General #
# Public License as published by the Free Software Foundation; #
# either version 2.1 of the License, or (at your option) any #
# later version. #
# #
# This source is distributed in the hope that it will be #
# useful, but WITHOUT ANY WARRANTY; without even the implied #
# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR #
# PURPOSE. See the GNU Lesser General Public License for more #
# details. #
# #
# You should have received a copy of the GNU Lesser General #
# Public License along with this source; if not, download it #
# from http://www.gnu.org/licenses/lgpl.html #
# #
################################################################
#**************************************************************
# Time Information
#**************************************************************
set_time_format -unit ns -decimal_places 3
#**************************************************************
# Create Clock
#**************************************************************
create_clock -name {MAIN_CLK} -period 30.303 -waveform { 0.000 15.151 } [get_ports {MAIN_CLK}]
# Clocks used:
# MAIN_CLK 33MHz
#
# PLL1: i_mfp_acia_clk_pll
# input: MAIN_CLK
# c0: 500 kHz
# c1: 2.4576 MHz
# c2: 24.576 MHz
#
# PLL2: i_ddr_clock_pll
# input: MAIN_CLK
# c0: 132 MHz 190°
# c1: 132 MHz 0°
# c2: 132 MHz 180°
# c3: 132 MHz 105°
# c4: 66 MHz 270°
#
# PLL3: i_atari_clk_pll
# input: MAIN_CLK
# c0: 2 MHz
# c1: 16 MHz
# c2: 25 MHz
# c3: 48 MHz
#
# PLL4_ i_video_clk_pll
# input: USB_CLK (48 MHz, PLL3 c3)
# c0: 96 MHz, programmable in 1MHz steps
#
#**************************************************************
# Create Generated Clock
#**************************************************************
derive_pll_clocks
# PIXEL_CLK is either
# CLK13M, CLK17M, CLK25M, CLK33M or CLK_VIDEO
# where CLK13M is half of CLK25M,
# CLK17M is half of CLK33M and CLK_VIDEO is the freely programmable
# clock of i_video_clk_pll
#
#**************************************************************
# Set Clock Latency
#**************************************************************
#**************************************************************
# Set Clock Uncertainty
#**************************************************************
#set_clock_uncertainty -rise_from [get_clocks {MAIN_CLK}] -rise_to [get_clocks {MAIN_CLK}] 2.00
#set_clock_uncertainty -rise_from [get_clocks {MAIN_CLK}] -fall_to [get_clocks {MAIN_CLK}] 2.00
derive_clock_uncertainty
#**************************************************************
# Set Input Delay
#**************************************************************
# set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 2.500 [all_inputs]
# set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 2.500 [all_inputs]
#set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 1.500 [get_ports {FB*}]
#set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 1.500 {nFB_CS1 nFB_CS2 nFB_CS3 nFB_OE}
#set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 1.500 [get_ports {FB*}]
#set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 1.500 {nFB_CS1 nFB_CS2 nFB_CS3 nFB_OE}
#**************************************************************
# Set Output Delay
#**************************************************************
# set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 2.500 [all_outputs]
# set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 2.500 [all_outputs]
#set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 1.500 [get_ports {FB*}]
#set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 1.500 {nFB_TA}
#set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 1.500 [get_ports {FB*}]
#set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 1.500 {nFB_TA}
# video RAM access
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -min 0.500 [get_ports {VA[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -max 0.500 [get_ports {VA[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -min 0.500 [get_ports {VD[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -max 0.500 [get_ports {VD[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -min 0.500 [get_ports {VDQS[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -max 0.500 [get_ports {VDQS[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -min 0.500 [get_ports {VDM[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -max 0.500 [get_ports {VDM[*]}]
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -min 0.500 {nVCAS nVRAS nVWE nVCS VCKE DDR_CLK nDDR_CLK BA[*]}
#set_output_delay -add_delay -clock [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -max 0.500 {nVCAS nVRAS nVWE nVCS VCKE DDR_CLK nDDR_CLK BA[*]}
#**************************************************************
# Set Clock Groups
#**************************************************************
#**************************************************************
# Set False Path
#**************************************************************
#
# i_video_clk is freely programmable
#
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
# MAIN_CLK to 16 MHz clk -> false_path
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[1]}]
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[2]}]
# MAIN_CLK to DDR clk and v.v.
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[1]}]
set_false_path -from [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[3]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[4]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[4]}] -to [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[4]}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[1]}]
set_false_path -from [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[4]}] -to [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[1]}]
set_false_path -from [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[1]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
# 2 MHz to 33 MHz
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[3]}] -to [get_clocks {MAIN_CLK}]
# 16 MHz to 33 MHz
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[1]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[1]}]
# 25 MHz to 33 MHz
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[2]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[2]}]
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[2]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[2]}] -to [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[2]}] -to [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[2]}]
set_false_path -from [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {MAIN_CLK}]
set_false_path -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] -to [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0]}]
set_false_path -from [get_keepers {*rdptr_g*}] -to [get_keepers {*ws_dgrp|dffpipe_id9:dffpipe17|dffe18a*}]
set_false_path -from [get_keepers {*delayed_wrptr_g*}] -to [get_keepers {*rs_dgwp|dffpipe_hd9:dffpipe12|dffe13a*}]
set_false_path -from [get_keepers {*rdptr_g*}] -to [get_keepers {*ws_dgrp|dffpipe_kd9:dffpipe15|dffe16a*}]
set_false_path -from [get_keepers {*delayed_wrptr_g*}] -to [get_keepers {*rs_dgwp|dffpipe_jd9:dffpipe12|dffe13a*}]
set_false_path -from [get_keepers {*rdptr_g*}] -to [get_keepers {*ws_dgrp|dffpipe_re9:dffpipe19|dffe20a*}]
#**************************************************************
# Set Multicycle Path
#**************************************************************
#**************************************************************
# Set Maximum Delay
#**************************************************************
#**************************************************************
# Set Minimum Delay
#**************************************************************
#**************************************************************
# Set Input Transition
#**************************************************************
-665
View File
@@ -1,665 +0,0 @@
library ieee;
use ieee.std_logic_1164.all;
library altera;
use altera.altera_primitives_components.all;
library work;
entity firebee1 is
port
(
MAIN_CLK : in std_logic;
nRSTO_MCF : in std_logic;
CLK33MDIR : in std_logic;
-- the ColdFire FlexBus signals
FB_ALE : in std_logic;
FB_AD : inout std_logic_vector(31 downto 0);
nFB_OE : in std_logic;
nFB_WR : in std_logic;
nFB_TA : out std_logic;
nFB_CS1 : in std_logic;
nFB_CS2 : in std_logic;
nFB_CS3 : in std_logic;
FB_SIZE0 : in std_logic;
FB_SIZE1 : in std_logic;
nFB_BURST : in std_logic;
-- serial port pins
RxD : in std_logic;
CTS : in std_logic;
RI : in std_logic;
DCD : in std_logic;
TxD : out std_logic;
RTS : out std_logic;
DTR : out std_logic;
-- parallel port
LP_D : inout std_logic_vector(7 downto 0);
LP_STR : out std_logic;
LPDIR : out std_logic;
LP_BUSY : in std_logic;
AMKB_RX : in std_logic;
PIC_AMKB_RX : in std_logic;
IDE_RDY : in std_logic;
IDE_INT : in std_logic;
WP_CF_CARD : in std_logic;
TRACK00 : in std_logic;
nWP : in std_logic;
nDCHG : in std_logic;
SD_DATA0 : in std_logic;
SD_DATA1 : in std_logic;
SD_DATA2 : in std_logic;
sd_card_detect : in std_logic;
nSCSI_DRQ : in std_logic;
SD_WP : in std_logic;
nRD_DATA : in std_logic;
nSCSI_C_D : in std_logic;
nSCSI_I_O : in std_logic;
nSCSI_MSG : in std_logic;
nDACK0 : in std_logic;
PIC_INT : in std_logic;
TOUT0 : in std_logic;
nMASTER : in std_logic;
DVI_INT : in std_logic;
nDACK1 : in std_logic;
nPCI_INTD : in std_logic;
nPCI_INTC : in std_logic;
nPCI_INTB : in std_logic;
nPCI_INTA : in std_logic;
E0_INT : in std_logic;
nINDEX : in std_logic;
HD_DD : in std_logic;
SCSI_PAR : inout std_logic;
nSCSI_RST : inout std_logic;
nSCSI_SEL : inout std_logic;
nSCSI_BUSY : inout std_logic;
SCSI_D : inout std_logic_vector(7 downto 0);
nSCSI_ACK : out std_logic;
nSCSI_ATN : out std_logic;
SCSI_DIR : out std_logic;
SD_CD_DATA3 : inout std_logic;
SD_CMD_D1 : inout std_logic;
MIDI_IN_PIN : inout std_logic;
IO : inout std_logic_vector(17 downto 0);
SRD : inout std_logic_vector(15 downto 0);
VD : inout std_logic_vector(31 downto 0);
VDQS : inout std_logic_vector(3 downto 0);
nACSI_DRQ : in std_logic;
nACSI_INT : in std_logic;
nACSI_ACK : out std_logic;
nACSI_RESET : out std_logic;
nACSI_CS : out std_logic;
ACSI_DIR : out std_logic;
ACSI_A1 : out std_logic;
ACSI_D : inout std_logic_vector(7 downto 0);
MIDI_TLR : out std_logic;
AMKB_TX : out std_logic;
IDE_RES : out std_logic;
nIDE_CS0 : out std_logic;
nIDE_CS1 : out std_logic;
nIDE_WR : out std_logic;
nIDE_RD : out std_logic;
nCF_CS0 : out std_logic;
nCF_CS1 : out std_logic;
nROM3 : out std_logic;
nROM4 : out std_logic;
nRP_UDS : out std_logic;
nRP_LDS : out std_logic;
nSDSEL : out std_logic;
nWR_GATE : out std_logic;
nWR : out std_logic;
YM_QA : out std_logic;
YM_QB : out std_logic;
YM_QC : out std_logic;
SD_CLK : out std_logic;
DSA_D : out std_logic;
nPD_VGA : out std_logic;
TIN0 : out std_logic;
nSRCS : out std_logic;
nSRBLE : out std_logic;
nSRBHE : out std_logic;
nSRWE : out std_logic;
nDREQ1 : out std_logic;
LED_FPGA_OK : out std_logic;
nSROE : out std_logic;
nSYNC : out std_logic;
nMOT_ON : out std_logic;
nSTEP_DIR : out std_logic;
nSTEP : out std_logic;
MIDI_OLR : out std_logic;
CLK25M : out std_logic;
CLKUSB : out std_logic;
CLK24M576 : out std_logic;
nIRQ : out std_logic_vector(7 downto 2);
-- DDR memory signals
BA : out std_logic_vector(1 downto 0);
VA : out std_logic_vector(12 downto 0);
VDM : out std_logic_vector(3 downto 0);
VCKE : out std_logic;
nDDR_CLK : out std_logic;
DDR_CLK : out std_logic;
nVWE : out std_logic;
nVCAS : out std_logic;
nVRAS : out std_logic;
nVCS : out std_logic;
-- video signals
VR : out std_logic_vector(7 downto 0);
VG : out std_logic_vector(7 downto 0);
VB : out std_logic_vector(7 downto 0);
VSYNC_PAD : out std_logic;
HSYNC_PAD : out std_logic;
nBLANK_PAD : out std_logic;
PIXEL_CLK_PAD : out std_logic
);
end firebee1;
architecture rtl of firebee1 is
signal acp_conf : std_logic_vector(31 downto 0);
signal clk25m_i : std_logic;
signal clk2m : std_logic;
signal clk2m4576 : std_logic;
signal clk33m : std_logic;
signal clk48m : std_logic;
signal clk500k : std_logic;
signal clk_video : std_logic;
signal ddr_sync_66m : std_logic;
signal ddrclk : std_logic_vector(3 downto 0);
signal dma_drq : std_logic;
signal dsp_int : std_logic;
signal dsp_ta : std_logic;
signal falcon_io_ta : std_logic;
signal fb_adr : std_logic_vector(31 downto 0);
signal fdc_clk : std_logic;
signal hsync : std_logic;
signal int_handler_ta : std_logic;
signal lp_dir : std_logic;
signal midi_in : std_logic;
signal mot_on : std_logic;
signal blank_n : std_logic;
signal dreq0_n : std_logic;
signal mfp_int_n : std_logic;
signal rsto_n : std_logic;
signal pixel_clk : std_logic;
signal sd_cdm_d1 : std_logic;
signal step : std_logic;
signal step_dir : std_logic;
signal timebase : std_logic_vector(17 downto 0);
signal video_reconfig : std_logic;
signal video_ta : std_logic;
signal vr_busy : std_logic;
signal vr_d : std_logic_vector(8 downto 0);
signal vr_rd : std_logic;
signal vr_wr : std_logic;
signal vsync : std_logic;
signal wr_data : std_logic;
signal wr_gate : std_logic;
signal scandataout : std_logic;
signal scandone : std_logic;
signal reset : std_logic;
signal pll_reset : std_logic;
signal scanclk : std_logic;
signal scandata : std_logic;
signal scan_clkena : std_logic;
signal config_update : std_logic;
signal pll3_locked : std_logic;
signal pll1_locked : std_logic;
signal srcs_n_i : std_logic;
signal fb_wr_n_i : std_logic;
signal ide_rd_n_i : std_logic;
signal ide_wr_n_i : std_logic;
signal fb_ad_in : std_logic_vector(31 downto 0);
signal fb_ad_out : std_logic_vector(31 downto 0);
component altpll_reconfig1
port
(
clock : in std_logic;
counter_param : in std_logic_vector (2 downto 0);
counter_type : in std_logic_vector (3 downto 0);
data_in : in std_logic_vector (8 downto 0);
pll_areset_in : in std_logic := '0';
pll_scandataout : in std_logic;
pll_scandone : in std_logic;
read_param : in std_logic;
reconfig : in std_logic;
reset : in std_logic;
write_param : in std_logic;
busy : out std_logic;
data_out : out std_logic_vector (8 downto 0);
pll_areset : out std_logic;
pll_configupdate : out std_logic;
pll_scanclk : out std_logic;
pll_scanclkena : out std_logic;
pll_scandata : out std_logic
);
end component altpll_reconfig1;
component altpll4
port
(
areset : in std_logic := '0';
configupdate : in std_logic := '0';
inclk0 : in std_logic := '0';
scanclk : in std_logic := '1';
scanclkena : in std_logic := '0';
scandata : in std_logic := '0';
c0 : out std_logic;
locked : out std_logic;
scandataout : out std_logic;
scandone : out std_logic
);
end component altpll4;
begin
nDREQ1 <= nDACK1;
i_atari_clk_pll : work.altpll3
port map
(
inclk0 => MAIN_CLK,
c0 => clk25m_i,
c1 => clk2m,
c2 => clk500k,
c3 => clk2m4576,
locked => pll3_locked
);
i_ddr_clk_pll : work.altpll2
port map
(
inclk0 => MAIN_CLK,
c0 => ddrclk(0),
c1 => ddrclk(1),
c2 => ddrclk(2),
c3 => ddrclk(3),
c4 => ddr_sync_66m
);
i_dsp : work.dsp
port map
(
clk33m => main_clk,
MAIN_CLK => MAIN_CLK,
nFB_OE => nFB_OE,
nFB_WR => nFB_WR,
nFB_CS1 => nFB_CS1,
nFB_CS2 => nFB_CS2,
FB_SIZE0 => FB_SIZE0,
FB_SIZE1 => FB_SIZE1,
nFB_BURST => nFB_BURST,
nrsto => rsto_n,
nFB_CS3 => nFB_CS3,
fb_ad_in => fb_ad_in,
fb_ad_out => fb_ad_out,
fb_adr => fb_adr,
IO => IO,
SRD => SRD,
nSRCS => srcs_n_i,
nSRBLE => nSRBLE,
nSRBHE => nSRBHE,
nSRWE => nSRWE,
nSROE => nSROE,
dsp_int => dsp_int,
dsp_ta => dsp_ta
);
i_falconio_sdcard_ide_cf : entity work.falconio_sdcard_ide_cf
port map
(
clk33m => main_clk,
MAIN_CLK => MAIN_CLK,
clk2m => clk2m,
clk500k => clk500k,
nFB_CS1 => nFB_CS1,
FB_SIZE0 => FB_SIZE0,
FB_SIZE1 => FB_SIZE1,
nFB_BURST => nFB_BURST,
LP_BUSY => LP_BUSY,
nACSI_DRQ => nACSI_DRQ,
nACSI_INT => nACSI_INT,
nSCSI_DRQ => nSCSI_DRQ,
nSCSI_MSG => nSCSI_MSG,
midi_in => midi_in,
RxD => RxD,
CTS => CTS,
RI => RI,
DCD => DCD,
AMKB_RX => AMKB_RX,
PIC_AMKB_RX => PIC_AMKB_RX,
IDE_RDY => IDE_RDY,
IDE_INT => IDE_INT,
WP_CS_CARD => '0',
nINDEX => nINDEX,
TRACK00 => TRACK00,
nRD_DATA => nRD_DATA,
nDCHG => nDCHG,
SD_DATA0 => SD_DATA0,
SD_DATA1 => SD_DATA1,
SD_DATA2 => SD_DATA2,
sd_card_dedect => sd_card_detect,
SD_WP => SD_WP,
nDACK0 => nDACK0,
nFB_WR => nFB_WR,
WP_CF_CARD => WP_CF_CARD,
nWP => nWP,
nFB_CS2 => nFB_CS2,
nrsto => rsto_n,
nSCSI_C_D => nSCSI_C_D,
nSCSI_I_O => nSCSI_I_O,
clk2m4576 => clk2m4576,
nFB_OE => nFB_OE,
vsync => vsync,
hsync => hsync,
dsp_int => dsp_int,
nblank => blank_n,
fdc_clk => fdc_clk,
FB_ALE => FB_ALE,
HD_DD => HD_DD,
SCSI_PAR => SCSI_PAR,
nSCSI_SEL => nSCSI_SEL,
nSCSI_BUSY => nSCSI_BUSY,
nSCSI_RST => nSCSI_RST,
SD_CD_DATA3 => SD_CD_DATA3,
sd_cdm_d1 => sd_cdm_d1,
acp_conf => acp_conf(31 downto 24),
ACSI_D => ACSI_D,
fb_ad_in => fb_ad_in,
fb_ad_out => fb_ad_out,
fb_adr => fb_adr,
LP_D => LP_D,
SCSI_D => SCSI_D,
nIDE_CS1 => nIDE_CS1,
nIDE_CS0 => nIDE_CS0,
LP_STR => LP_STR,
lp_dir => lp_dir,
nACSI_ACK => nACSI_ACK,
nACSI_RESET => nACSI_RESET,
nACSI_CS => nACSI_CS,
ACSI_DIR => ACSI_DIR,
ACSI_A1 => ACSI_A1,
nSCSI_ACK => nSCSI_ACK,
nSCSI_ATN => nSCSI_ATN,
SCSI_DIR => SCSI_DIR,
SD_CLK => SD_CLK,
YM_QA => YM_QA,
YM_QC => YM_QC,
YM_QB => YM_QB,
nSDSEL => nSDSEL,
step => step,
mot_on => mot_on,
nRP_LDS => nRP_LDS,
nRP_UDS => nRP_UDS,
nROM4 => nROM4,
nROM3 => nROM3,
nCF_CS1 => nCF_CS1,
nCF_CS0 => nCF_CS0,
nIDE_RD => ide_rd_n_i,
nIDE_WR => ide_wr_n_i,
AMKB_TX => AMKB_TX,
IDE_RES => IDE_RES,
DTR => DTR,
RTS => RTS,
TxD => TxD,
MIDI_OLR => MIDI_OLR,
DSA_D => DSA_D,
nmfp_int => mfp_int_n,
falcon_io_ta => falcon_io_ta,
step_dir => step_dir,
wr_data => wr_data,
wr_gate => wr_gate,
dma_drq => dma_drq,
MIDI_TLR => MIDI_TLR
);
i_interrupt_handler : entity work.interrupt_handler
port map
(
MAIN_CLK => MAIN_CLK,
nFB_WR => nFB_WR,
nFB_CS1 => nFB_CS1,
nFB_CS2 => nFB_CS2,
FB_SIZE0 => FB_SIZE0,
FB_SIZE1 => FB_SIZE1,
PIC_INT => PIC_INT,
E0_INT => E0_INT,
DVI_INT => DVI_INT,
nPCI_INTA => nPCI_INTA,
nPCI_INTB => nPCI_INTB,
nPCI_INTC => nPCI_INTC,
nPCI_INTD => nPCI_INTD,
nmfp_int => mfp_int_n,
nFB_OE => nFB_OE,
dsp_int => dsp_int,
vsync => vsync,
hsync => hsync,
dma_drq => dma_drq,
nrsto => rsto_n,
fb_ad_in => fb_ad_in,
fb_ad_out => fb_ad_out,
fb_adr => fb_adr,
int_handler_ta => int_handler_ta,
TIN0 => TIN0,
acp_conf => acp_conf,
nIRQ => nIRQ
);
i_mfp_acia_clk_pll : entity work.altpll1
port map
(
inclk0 => MAIN_CLK,
c0 => clk48m,
c1 => fdc_clk,
c2 => CLK24M576,
locked => pll1_locked
);
i_pll_reconfig : altpll_reconfig1
port map
(
reconfig => video_reconfig,
read_param => vr_rd,
write_param => vr_wr,
pll_areset_in => '0',
pll_scandataout => scandataout,
pll_scandone => scandone,
clock => MAIN_CLK,
reset => reset,
counter_param => fb_adr(8 downto 6),
counter_type => fb_adr(5 downto 2),
data_in => FB_AD(24 downto 16),
busy => vr_busy,
pll_scandata => scandata,
pll_scanclk => scanclk,
pll_scanclkena => scan_clkena,
pll_configupdate => config_update,
pll_areset => pll_reset,
data_out => vr_d
);
i_video : entity work.video
port map
(
MAIN_CLK => MAIN_CLK,
nFB_CS1 => nFB_CS1,
nFB_CS2 => nFB_CS2,
nFB_CS3 => nFB_CS3,
nFB_WR => nFB_WR,
FB_SIZE0 => FB_SIZE0,
FB_SIZE1 => FB_SIZE1,
nrsto => rsto_n,
nFB_OE => nFB_OE,
FB_ALE => FB_ALE,
ddr_sync_66m => ddr_sync_66m,
-- clk33m => clk33m,
clk33m => main_clk,
CLK25M => clk25m_i,
clk_video => clk_video,
vr_busy => vr_busy,
ddrclk => ddrclk,
fb_ad_in => fb_ad_in,
fb_ad_out => fb_ad_out,
fb_adr => fb_adr,
VD => VD,
VDQS => VDQS,
vr_d => vr_d,
vr_rd => vr_rd,
nblank => blank_n,
nVWE => nVWE,
nVCAS => nVCAS,
nVRAS => nVRAS,
nVCS => nVCS,
nPD_VGA => nPD_VGA,
VCKE => VCKE,
vsync => vsync,
hsync => hsync,
nSYNC => nSYNC,
VIDEO_TA => video_ta,
pixel_clk => pixel_clk,
video_reconfig => video_reconfig,
vr_wr => vr_wr,
BA => BA,
VA => VA,
VB => VB,
VDM => VDM,
VG => VG,
VR => VR
);
i_video_clk_pll : altpll4
port map
(
inclk0 => clk48m,
areset => pll_reset,
scanclk => scanclk,
scandata => scandata,
scanclkena => scan_clkena,
configupdate => config_update,
c0 => clk_video,
scandataout => scandataout,
scandone => scandone
);
i_fb_adr_latch : entity work.lpm_ff0
port map
(
clock => ddr_sync_66m,
enable => FB_ALE,
data => FB_AD,
q => fb_adr
);
nMOT_ON <= not(mot_on);
nSTEP_DIR <= not(step_dir);
nSTEP <= not(step);
nWR <= not(wr_data);
inst18 : entity work.lpm_counter0
port map
(
clock => clk500k,
q => timebase
);
nWR_GATE <= not(wr_gate);
nFB_TA <= not(video_ta or int_handler_ta or dsp_ta or falcon_io_ta);
fb_ad_in <= FB_AD;
FB_AD <= fb_ad_out when (video_ta or int_handler_ta or dsp_ta or falcon_io_ta) else (others => 'Z');
clk33m <= MAIN_CLK;
reset <= not(rsto_n);
rsto_n <= pll3_locked and pll1_locked and nRSTO_MCF;
inst29 : alt_iobuf
port map
(
i => clk2m,
oe => clk2m,
io => MIDI_IN_PIN,
o => midi_in
);
led_fpga_ok <= timebase(17);
nDDR_CLK <= not(ddrclk(0));
inst5 : entity work.altddio_out3
port map
(
datain_h => vsync,
datain_l => vsync,
outclock => pixel_clk,
dataout => VSYNC_PAD
);
inst6 : entity work.altddio_out3
port map
(
datain_h => hsync,
datain_l => hsync,
outclock => pixel_clk,
dataout => HSYNC_PAD
);
inst8 : entity work.altddio_out3
port map
(
datain_h => blank_n,
datain_l => blank_n,
outclock => pixel_clk,
dataout => nBLANK_PAD
);
inst9 : entity work.altddio_out3
port map
(
datain_h => '0',
datain_l => '1',
outclock => pixel_clk,
dataout => PIXEL_CLK_PAD
);
SD_CMD_D1 <= sd_cdm_d1;
DDR_CLK <= ddrclk(0);
LPDIR <= lp_dir;
CLK25M <= clk25m_i;
CLKUSB <= clk48m;
nSRCS <= srcs_n_i;
nIDE_RD <= ide_rd_n_i;
nIDE_WR <= ide_wr_n_i;
end rtl;
-205
View File
@@ -1,205 +0,0 @@
#--------------------------------------------------------------#
# #
# Synopsis design constraints for the Firebee project #
# #
# This file is part of the Firebee ACP project. #
# http://www.experiment-s.de #
# #
# Description: #
# timing constraints for the Firebee VHDL config #
# #
# #
# #
# To Do: #
# - #
# #
# Author(s): #
# Markus Fröschle, mfro@mubf.de #
# #
#--------------------------------------------------------------#
# #
# Copyright (C) 2015 Markus Fröschle & the ACP project #
# #
# This source file may be used and distributed without #
# restriction provided that this copyright statement is not #
# removed from the file and that any derivative work contains #
# the original copyright notice and the associated disclaimer. #
# #
# This source file is free software; you can redistribute it #
# and/or modify it under the terms of the GNU Lesser General #
# Public License as published by the Free Software Foundation; #
# either version 2.1 of the License, or (at your option) any #
# later version. #
# #
# This source is distributed in the hope that it will be #
# useful, but WITHOUT ANY WARRANTY; without even the implied #
# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR #
# PURPOSE. See the GNU Lesser General Public License for more #
# details. #
# #
# You should have received a copy of the GNU Lesser General #
# Public License along with this source; if not, download it #
# from http://www.gnu.org/licenses/lgpl.html #
# #
################################################################
#**************************************************************
# Time Information
#**************************************************************
set_time_format -unit ns -decimal_places 3
#**************************************************************
# Create Clock
#**************************************************************
create_clock -name {MAIN_CLK} -period 30.303 -waveform { 0.000 15.151 } [get_ports {MAIN_CLK}]
# Clocks used:
# MAIN_CLK 33MHz
#
# PLL1: i_mfp_acia_clk_pll
# input: MAIN_CLK
# c0: 500 kHz
# c1: 2.4576 MHz
# c2: 24.576 MHz
#
# PLL2: i_ddr_clock_pll
# input: MAIN_CLK
# c0: 132 MHz 240°
# c1: 132 MHz 0°
# c2: 132 MHz 180°
# c3: 132 MHz 105°
# c4: 66 MHz 270°
#
# PLL3: i_atari_clk_pll
# input: MAIN_CLK
# c0: 2 MHz
# c1: 16 MHz
# c2: 25 MHz
# c3: 48 MHz
#
# PLL4_ i_video_clk_pll
# input: USB_CLK (48 MHz, PLL3 c3)
# c0: 96 MHz, programmable in 1MHz steps
#
#**************************************************************
# Create Generated Clock
#**************************************************************
derive_pll_clocks
# two (video) clocks created by logic
create_generated_clock -divide_by 2 -source MAIN_CLK i_video|i_video_mod_mux_clutctr|CLK17M_q
create_generated_clock -divide_by 2 -source i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0] i_video|i_video_mod_mux_clutctr|CLK13M_q
# PIXEL_CLK is either
# CLK13M, CLK17M, CLK25M, CLK33M or CLK_VIDEO
# where CLK13M is half of CLK25M,
# CLK17M is half of CLK33M and CLK_VIDEO is the freely programmable
# clock of i_video_clk_pll
#
# virtual clocks for i/o constraints
create_clock -name virt_main_clk -period 30.303 -waveform { 0.000 15.151 }
create_clock -name virt_ddr_clk0 -period 7.575 -waveform { 0.666 4.456 }
create_clock -name virt_ddr_clk1 -period 7.575 -waveform { 0.0 3.788 }
create_clock -name virt_ddr_clk2 -period 7.575 -waveform { 0.5 4.288 }
create_clock -name virt_ddr_clk3 -period 7.575 -waveform { 0.291 4.080 }
#**************************************************************
# Set Clock Latency
#**************************************************************
#**************************************************************
# Set Clock Uncertainty
#**************************************************************
# set_clock_uncertainty -rise_from [get_clocks {MAIN_CLK}] -rise_to [get_clocks {MAIN_CLK}] 4.5
# set_clock_uncertainty -rise_from [get_clocks {MAIN_CLK}] -fall_to [get_clocks {MAIN_CLK}] 4.5
derive_clock_uncertainty
#**************************************************************
# Set Input Delay
#**************************************************************
#set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 1.500 [all_inputs]
#set_input_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 0.500 [all_inputs]
#**************************************************************
# Set Output Delay
#**************************************************************
#set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -max 2.500 [all_outputs]
#set_output_delay -add_delay -clock [get_clocks {MAIN_CLK}] -min 0.500 [all_outputs]
#**************************************************************
# Set Clock Groups
#**************************************************************
set_clock_groups -asynchronous -group [get_clocks {MAIN_CLK}] \
[get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[4]}] \
-group [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] \
[get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[1]}] \
[get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[2]}] \
[get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[3]}] \
-group [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] \
-group [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[1]}] \
-group [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[2]}] \
-group [get_clocks {i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[3]}] \
-group [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] \
-group [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[1]}] \
-group [get_clocks {i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[2]}] \
-group [get_clocks {i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]}] \
-group [get_clocks {video:i_video|video_mod_mux_clutctr:i_video_mod_mux_clutctr|CLK17M_q}] \
-group [get_clocks {video:i_video|video_mod_mux_clutctr:i_video_mod_mux_clutctr|CLK13M_q}]
#**************************************************************
# Set False Path
#**************************************************************
#**************************************************************
# Set Multicycle Path
#**************************************************************
#set_multicycle_path -start -from video:i_video|video_mod_mux_clutctr:i_video_mod_mux_clutctr|CLK17M_q -to i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0] 2
#set_multicycle_path -start -from video:i_video|video_mod_mux_clutctr:i_video_mod_mux_clutctr|CLK13M_q -to i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0] 2
#set_multicycle_path -end -from video:i_video|video_mod_mux_clutctr:i_video_mod_mux_clutctr|CLK13M_q -to MAIN_CLK 2
#set_multicycle_path -start -from MAIN_CLK -to i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0] 2
#set_multicycle_path -start -from MAIN_CLK -to i_mfp_acia_clk_pll|altpll_component|auto_generated|pll1|clk[1] 2
#set_multicycle_path -start -from MAIN_CLK -to i_atari_clk_pll|altpll_component|auto_generated|pll1|clk[0] 2
# set_multicycle_path -start -from [get_clocks {MAIN_CLK}] -to [get_clocks {i_ddr_clk_pll|altpll_component|auto_generated|pll1|clk[4]}] 2
#**************************************************************
# Set Maximum Delay
#**************************************************************
#**************************************************************
# Set Minimum Delay
#**************************************************************
#**************************************************************
# Set Input Transition
#**************************************************************
if { [string equal "quartus_fit" $::TimeQuestInfo(nameofexecutable)] } {
post_message -type info "Over constraining hold for MAIN_CLK"
set_clock_uncertainty -add -enable_same_physical_edge -from { MAIN_CLK } -to { MAIN_CLK } -hold 0.2
}
if { [string equal "quartus_fit" $::TimeQuestInfo(nameofexecutable)] } {
post_message -type info "Over constraining setup for i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0]"
set_clock_uncertainty -add -enable_same_physical_edge -from { i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0] } -to { i_video_clk_pll|altpll_component|auto_generated|pll1|clk[0] } -setup 0.25
}
-170
View File
@@ -1,170 +0,0 @@
----------------------------------------------------------------------
---- ----
---- This file is part of the 'Firebee' project. ----
---- http://acp.atari.org ----
---- ----
---- Description: ----
---- This package contains utility functions, procedures and constants
---- for the Firebee project.
----
---- Author(s): ----
---- - Markus Froeschle, mfro@mubf.de
---- ----
----------------------------------------------------------------------
---- ----
---- Copyright (C) 2015 Markus Froeschle
---- ----
---- This source file is free software; you can redistribute it ----
---- and/or modify it under the terms of the GNU General Public ----
---- License as published by the Free Software Foundation; either ----
---- version 2 of the License, or (at your option) any later ----
---- version. ----
---- ----
---- This program is distributed in the hope that it will be ----
---- useful, but WITHOUT ANY WARRANTY; without even the implied ----
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ----
---- PURPOSE. See the GNU General Public License for more ----
---- details. ----
---- ----
---- You should have received a copy of the GNU General Public ----
---- License along with this program; if not, write to the Free ----
---- Software Foundation, Inc., 51 Franklin Street, Fifth Floor, ----
---- Boston, MA 02110-1301, USA. ----
---- ----
----------------------------------------------------------------------
--
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
package firebee_utils_pkg is
function f_addr_cmp_l(signal addr : std_logic_vector; constant addr_const : std_logic_vector) return std_logic;
function f_addr_cmp_w(signal addr : std_logic_vector; constant addr_const : std_logic_vector) return std_logic;
function f_addr_cmp_b(signal addr : std_logic_vector; constant addr_const : std_logic_vector) return std_logic;
function f_addr_cmp_mask(signal addr : std_logic_vector; constant addr_const : std_logic_vector; constant num_ignore : integer) return std_logic;
function max(left : integer; right : integer) return integer;
function min(left : integer; right : integer) return integer;
component synchronizer IS
PORT
(
-- Input ports
source_signal : in std_logic;
target_clock : in std_logic;
target_signal : out std_logic
);
end component synchronizer;
-- size constants for the TSIZE vector
type tsize_t is (SIZE_LONG, SIZE_WORD, SIZE_BYTE, SIZE_LINE, SIZE_TRISTATE);
attribute enum_encoding : string;
attribute enum_encoding of tsize_t: type is "00 10 01 11 ZZ";
-- constant SIZE_LONG : std_logic_vector(1 downto 0) := "00";
-- constant SIZE_WORD : std_logic_vector(1 downto 0) := "10";
-- constant SIZE_BYTE : std_logic_vector(1 downto 0) := "01";
-- constant SIZE_LINE : std_logic_vector(1 downto 0) := "11";
end firebee_utils_pkg;
package body firebee_utils_pkg is
-- returns the smaller of two integers
function min(left : integer; right : integer) return integer is
begin
if left < right then
return left;
else
return right;
end if;
end function min;
-- returns the larger of two integers
function max(left : integer; right : integer) return integer is
begin
if left > right then
return left;
else
return right;
end if;
end function max;
-- returns the number of bits needed to represent n
function log2ceil(n : natural) return natural is
variable n_bit : unsigned(31 downto 0);
begin -- log2ceil
if n = 0 then
return 0;
end if;
n_bit := to_unsigned(n-1,32);
for i in 31 downto 0 loop
if n_bit(i) = '1' then
return i + 1;
end if;
end loop; -- i
return 1;
end log2ceil;
-- this is for arbitrary sized address compares. It compares from the highest bit of addr_const to the lowest - num_ignore
-- bit, thus allowing any size of comparision.
function f_addr_cmp_mask(signal addr : std_logic_vector;
constant addr_const : std_logic_vector;
constant num_ignore : integer
) return std_logic is
variable ret : std_logic := '1';
variable hi : integer;
variable lo : integer;
begin
hi := min(addr_const'high, addr'high);
lo := max(addr_const'low, addr'low);
-- report("faddr_cmp_mask(): hi = " & to_string(hi) & " lo = " & to_string(lo) & " log2ceil(num_ignore) = " & to_string(log2ceil(num_ignore)));
l_loop: for i in hi downto lo + log2ceil(num_ignore) - 1 loop
if addr(i) /= addr_const(i) then
-- synthesis translate_off
-- report("f_addr_cmp_mask(): addr = " & to_hstring(unsigned(addr)) & " differs from addr_const = " & to_hstring(unsigned(addr_const)) &
-- " at bit = " & integer'image(i));
-- report("addr(" & integer'image(i) & ") (" & to_string(addr) & ") = " & to_string(addr(i)) &
-- " addr_const(" & integer'image(i) & ") ( " & to_string(addr_const) & ") = " & to_string(addr_const(i)));
-- synthesis translate_on
ret := '0';
exit l_loop;
else
-- pragma synthesis off
-- report("f_addr_cmp_mask(): addr = " & to_hstring(unsigned(addr)) & " equals to addr_const = " & to_hstring(unsigned(addr_const)) &
-- " at bit = " & integer'image(i));
-- report("addr(" & integer'image(i) & ") (" & to_string(addr) & ") = " & to_string(addr(i)) &
-- " addr_const(" & integer'image(i) & ") ( " & to_string(addr_const) & ") = " & to_string(addr_const(i)));
-- pragma synthesis on
end if;
end loop;
-- pragma synthesis off
report("f_addr_cmp_mask(" & to_hstring(unsigned(addr)) & ", " & to_hstring(unsigned(addr_const)) & "): return " & to_string(ret));
-- pragma synthesis on
return ret;
end function f_addr_cmp_mask;
function f_addr_cmp_l(signal addr : std_logic_vector;
constant addr_const : std_logic_vector
) return std_logic is
begin
return f_addr_cmp_mask(addr, addr_const, 2);
end function f_addr_cmp_l;
function f_addr_cmp_w(signal addr : std_logic_vector;
constant addr_const : std_logic_vector
) return std_logic is
begin
return f_addr_cmp_mask(addr, addr_const, 1);
end function f_addr_cmp_w;
function f_addr_cmp_b(signal addr : std_logic_vector;
constant addr_const : std_logic_vector
) return std_logic is
begin
return f_addr_cmp_mask(addr, addr_const, 0);
end function f_addr_cmp_b;
end package body firebee_utils_pkg;
-115
View File
@@ -1,115 +0,0 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
library work;
use work.firebee_utils_pkg.all;
entity flexbus_register is
generic
(
reg_width : integer := 11;
match_address : std_logic_vector(31 downto 0) := (others => '0');
num_ignore : integer range 0 to 31;
match_fbcs : integer := 0
);
port
(
clk : in std_logic;
-- FlexBus signals
fb_addr : in std_logic_vector(31 downto 0);
fb_ad_in : in std_logic_vector(31 downto 0);
fb_ad_out : out std_logic_vector(31 downto 0);
fb_cs_n : in std_logic_vector(5 downto 1);
fb_wr_n : in std_logic;
fb_oe_n : in std_logic;
fb_size : in std_logic_vector(1 downto 0);
register_ta : out std_logic
);
end entity flexbus_register;
architecture rtl of flexbus_register is
signal fbcs_match : std_logic;
signal address_match : std_logic;
signal fb_b : std_logic_vector(3 downto 0); -- byte selects
signal cs : std_logic;
signal reg_value : std_logic_vector(reg_width - 1 downto 0);
begin
-- byte selects
-- HWORD
-- HHBYT
-- LONG UND LINE
fb_b(0) <= (fb_size(1) and (not fb_size(0)) and (not fb_addr(1))) or
((not fb_size(1)) and fb_size(0) and (not fb_addr(1)) and (not fb_addr(0))) or
((not fb_size(1)) and (not fb_size(0))) or
(fb_size(1) and fb_size(0));
-- HWORD
-- HLBYT
-- LONG UND LINE
fb_b(1) <= (fb_size(1) and (not fb_size(0) and (not fb_addr(1)))) or
((not fb_size(1)) and fb_size(0) and (not fb_addr(1)) and fb_addr(0)) or
((not fb_size(1)) and (not fb_size(0))) or
(fb_size(1) and fb_size(0));
-- LWORD
-- LHBYT
-- LONG UND LINE
fb_b(2) <= (fb_size(1) and (not fb_size(0)) and fb_addr(1)) or
((not fb_size(1)) and fb_size(0) and fb_addr(1) and (not fb_addr(0))) or
((not fb_size(1)) and (not fb_size(0))) or (fb_size(1) and fb_size(0));
-- LWORD
-- LLBYT
-- LONG UND LINE
fb_b(3) <= (fb_size(1) and (not fb_size(0)) and fb_addr(1)) or
((not fb_size(1)) and fb_size(0) and fb_addr(1) and fb_addr(0)) or
((not fb_size(1)) and (not fb_size(0))) or
(fb_size(1) and fb_size(0));
fbcs_match <= '1' when not(fb_cs_n(match_fbcs)) = '1' else '0';
address_match <= f_addr_cmp_mask(fb_addr, match_address, num_ignore);
cs <= '1' when fbcs_match and address_match else '0';
p_copy_data_in : process (all)
begin
reg_value <= reg_value;
if cs and not fb_wr_n then
if reg_width > 24 and fb_b(0) = '1' then -- HH byte
reg_value(reg_width - 1 downto 24) <= fb_ad_in(work.firebee_utils_pkg.min(31, reg_width - 1) downto 24);
end if;
if reg_width > 16 and fb_b(1) = '1' then -- HL byte
reg_value(work.firebee_utils_pkg.min(23, reg_width - 1) downto 16) <= fb_ad_in(work.firebee_utils_pkg.min(23, reg_width - 1) downto 16);
end if;
if reg_width > 8 and fb_b(2) = '1' then -- LH byte
reg_value(work.firebee_utils_pkg.min(15, reg_width - 1) downto 8) <= fb_ad_in(work.firebee_utils_pkg.min(15, reg_width - 1) downto 8);
end if;
if reg_width > 0 and fb_b(3) = '1' then -- LL byte
reg_value(work.firebee_utils_pkg.min(7, reg_width - 1) downto 0) <= fb_ad_in(work.firebee_utils_pkg.min(7, reg_width - 1) downto 0);
end if;
end if;
end process p_copy_data_in;
p_copy_data_out : process (all)
begin
fb_ad_out <= (others => 'Z');
if cs and not fb_oe_n then
if reg_width > 24 and fb_b(0) = '1' then -- HH byte
fb_ad_out(work.firebee_utils_pkg.min(31, reg_width - 1) downto 24) <= reg_value(work.firebee_utils_pkg.min(31, reg_width - 1) downto 24);
end if;
if reg_width > 16 and fb_b(1) = '1' then -- HL byte
fb_ad_out(work.firebee_utils_pkg.min(23, reg_width - 1) downto 16) <= reg_value(work.firebee_utils_pkg.min(23, reg_width - 1) downto 16);
end if;
if reg_width > 8 and fb_b(2) = '1' then -- LH byte
fb_ad_out(work.firebee_utils_pkg.min(15, reg_width - 1) downto 8) <= reg_value(work.firebee_utils_pkg.min(15, reg_width - 1) downto 8);
end if;
if reg_width > 0 and fb_b(3) = '1' then -- LL byte
fb_ad_out(work.firebee_utils_pkg.min(7, reg_width - 1) downto 0) <= reg_value(work.firebee_utils_pkg.min(7, reg_width - 1) downto 0);
end if;
end if;
end process p_copy_data_out;
register_ta <= cs;
end architecture rtl;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri_BYT
PORT
(
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (7 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri_LONG
PORT
(
data : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri_WORD
PORT
(
data : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (15 DOWNTO 0)
);
end component;
-22
View File
@@ -1,22 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_counter0
PORT
(
clock : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (17 DOWNTO 0)
);
end component;
-6
View File
@@ -1,6 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "LPM_COUNTER"
set_global_assignment -name IP_TOOL_VERSION "9.1"
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_counter1.tdf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_counter1.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_counter1.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_counter1.cmp"]
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_latch0
PORT
(
data : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
gate : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-6
View File
@@ -1,6 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "LPM_MUX"
set_global_assignment -name IP_TOOL_VERSION "9.1"
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_mux0.tdf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_mux0.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_mux0.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_mux0.cmp"]
-6
View File
@@ -1,6 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "LPM_SHIFTREG"
set_global_assignment -name IP_TOOL_VERSION "9.1"
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_shiftreg0.tdf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_shiftreg0.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_shiftreg0.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_shiftreg0.cmp"]
@@ -1,47 +0,0 @@
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
entity blitter is
port
(
nRSTO : in std_logic;
MAIN_CLK : in std_logic;
FB_ALE : in std_logic;
nFB_WR : in std_logic;
nFB_OE : in std_logic;
FB_SIZE0 : in std_logic;
FB_SIZE1 : in std_logic;
VIDEO_RAM_CTR : in std_logic_vector(15 downto 0);
BLITTER_ON : in std_logic;
FB_ADR : in std_logic_vector(31 downto 0);
nFB_CS1 : in std_logic;
nFB_CS2 : in std_logic;
nFB_CS3 : in std_logic;
DDRCLK0 : in std_logic;
BLITTER_DIN : in std_logic_vector(127 downto 0);
BLITTER_DACK : in std_logic_vector(4 downto 0);
SR_BLITTER_DACK : in std_logic;
blitter_run : out std_logic;
blitter_dout : out std_logic_vector(127 downto 0);
blitter_adr : out std_logic_vector(31 downto 0);
blitter_sig : out std_logic;
blitter_wr : out std_logic;
blitter_ta : out std_logic;
fb_ad_in : in std_logic_vector(31 downto 0);
fb_ad_out : out std_logic_vector(31 downto 0)
);
end BLITTER;
architecture rtl of blitter is
begin
blitter_run <= '0';
blitter_dout <= x"FEDCBA9876543210F0F0F0F0F0F0F0F0";
blitter_adr <= x"76543210";
blitter_sig <= '0';
blitter_wr <= '0';
blitter_ta <= '0';
fb_ad_out <= (others => 'Z');
end rtl;
@@ -1,6 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "ALTSYNCRAM"
set_global_assignment -name IP_TOOL_VERSION "9.1"
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altsyncram0.tdf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altsyncram0.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altsyncram0.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altsyncram0.cmp"]
@@ -1,6 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "LPM_CLSHIFT"
set_global_assignment -name IP_TOOL_VERSION "9.1"
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_clshift0.tdf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_clshift0.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_clshift0.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "lpm_clshift0.cmp"]
@@ -1,29 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altddio_bidir0
PORT
(
datain_h : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
datain_l : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
inclock : IN STD_LOGIC ;
oe : IN STD_LOGIC := '1';
outclock : IN STD_LOGIC ;
combout : OUT STD_LOGIC_VECTOR (31 DOWNTO 0);
dataout_h : OUT STD_LOGIC_VECTOR (31 DOWNTO 0);
dataout_l : OUT STD_LOGIC_VECTOR (31 DOWNTO 0);
padio : INOUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altddio_out0
PORT
(
datain_h : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
datain_l : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
outclock : IN STD_LOGIC ;
dataout : OUT STD_LOGIC_VECTOR (3 DOWNTO 0)
);
end component;
-7
View File
@@ -1,7 +0,0 @@
set_global_assignment -name IP_TOOL_NAME "ALTDDIO_OUT"
set_global_assignment -name IP_TOOL_VERSION "8.1"
set_global_assignment -name VHDL_FILE [file join $::quartus(qip_path) "altddio_out0.vhd"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out0.bsf"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out0.inc"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out0.cmp"]
set_global_assignment -name MISC_FILE [file join $::quartus(qip_path) "altddio_out0.ppf"]
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altddio_out1
PORT
(
datain_h : IN STD_LOGIC ;
datain_l : IN STD_LOGIC ;
outclock : IN STD_LOGIC ;
dataout : OUT STD_LOGIC
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altddio_out2
PORT
(
datain_h : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
datain_l : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
outclock : IN STD_LOGIC ;
dataout : OUT STD_LOGIC_VECTOR (23 DOWNTO 0)
);
end component;
-30
View File
@@ -1,30 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altdpram0
PORT
(
address_a : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
address_b : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
clock_a : IN STD_LOGIC ;
clock_b : IN STD_LOGIC ;
data_a : IN STD_LOGIC_VECTOR (2 DOWNTO 0);
data_b : IN STD_LOGIC_VECTOR (2 DOWNTO 0);
wren_a : IN STD_LOGIC := '1';
wren_b : IN STD_LOGIC := '1';
q_a : OUT STD_LOGIC_VECTOR (2 DOWNTO 0);
q_b : OUT STD_LOGIC_VECTOR (2 DOWNTO 0)
);
end component;
-30
View File
@@ -1,30 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altdpram1
PORT
(
address_a : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
address_b : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
clock_a : IN STD_LOGIC ;
clock_b : IN STD_LOGIC ;
data_a : IN STD_LOGIC_VECTOR (5 DOWNTO 0);
data_b : IN STD_LOGIC_VECTOR (5 DOWNTO 0);
wren_a : IN STD_LOGIC := '1';
wren_b : IN STD_LOGIC := '1';
q_a : OUT STD_LOGIC_VECTOR (5 DOWNTO 0);
q_b : OUT STD_LOGIC_VECTOR (5 DOWNTO 0)
);
end component;
-30
View File
@@ -1,30 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component altdpram2
PORT
(
address_a : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
address_b : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
clock_a : IN STD_LOGIC ;
clock_b : IN STD_LOGIC ;
data_a : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data_b : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
wren_a : IN STD_LOGIC := '1';
wren_b : IN STD_LOGIC := '1';
q_a : OUT STD_LOGIC_VECTOR (7 DOWNTO 0);
q_b : OUT STD_LOGIC_VECTOR (7 DOWNTO 0)
);
end component;
File diff suppressed because it is too large Load Diff
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri0
PORT
(
data : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri1
PORT
(
data : IN STD_LOGIC_VECTOR (2 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (2 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri2
PORT
(
data : IN STD_LOGIC_VECTOR (17 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (17 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri3
PORT
(
data : IN STD_LOGIC_VECTOR (5 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (5 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri4
PORT
(
data : IN STD_LOGIC_VECTOR (4 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (4 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri5
PORT
(
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (7 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri6
PORT
(
data : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (23 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_bustri7
PORT
(
data : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
enabledt : IN STD_LOGIC ;
tridata : INOUT STD_LOGIC_VECTOR (3 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_compare1
PORT
(
dataa : IN STD_LOGIC_VECTOR (10 DOWNTO 0);
datab : IN STD_LOGIC_VECTOR (10 DOWNTO 0);
AgB : OUT STD_LOGIC
);
end component;
-21
View File
@@ -1,21 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_constant3
PORT
(
result : OUT STD_LOGIC_VECTOR (6 DOWNTO 0)
);
end component;
-21
View File
@@ -1,21 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_constant4
PORT
(
result : OUT STD_LOGIC_VECTOR (10 DOWNTO 0)
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_ff0
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
enable : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_ff1
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
q : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_ff2
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
q : OUT STD_LOGIC_VECTOR (127 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_ff3
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
q : OUT STD_LOGIC_VECTOR (23 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_ff4
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
q : OUT STD_LOGIC_VECTOR (15 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_ff5
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
q : OUT STD_LOGIC_VECTOR (7 DOWNTO 0)
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_ff6
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
enable : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (127 DOWNTO 0)
);
end component;
-26
View File
@@ -1,26 +0,0 @@
--Copyright (C) 1991-2010 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_fifoDZ
PORT
(
aclr : IN STD_LOGIC ;
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
rdreq : IN STD_LOGIC ;
wrreq : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (127 DOWNTO 0)
);
end component;
-29
View File
@@ -1,29 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_fifo_dc0
PORT
(
aclr : IN STD_LOGIC := '0';
data : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
rdclk : IN STD_LOGIC ;
rdreq : IN STD_LOGIC ;
wrclk : IN STD_LOGIC ;
wrreq : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (127 DOWNTO 0);
rdempty : OUT STD_LOGIC ;
wrusedw : OUT STD_LOGIC_VECTOR (8 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_latch1
PORT
(
data : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
gate : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-27
View File
@@ -1,27 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_mux0
PORT
(
clock : IN STD_LOGIC ;
data0x : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
data2x : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
data3x : IN STD_LOGIC_VECTOR (31 DOWNTO 0);
sel : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
result : OUT STD_LOGIC_VECTOR (31 DOWNTO 0)
);
end component;
-31
View File
@@ -1,31 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_mux1
PORT
(
clock : IN STD_LOGIC ;
data0x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
data2x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
data3x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
data4x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
data5x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
data6x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
data7x : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
sel : IN STD_LOGIC_VECTOR (2 DOWNTO 0);
result : OUT STD_LOGIC_VECTOR (15 DOWNTO 0)
);
end component;
-39
View File
@@ -1,39 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_mux2
PORT
(
clock : IN STD_LOGIC ;
data0x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data10x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data11x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data12x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data13x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data14x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data15x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data2x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data3x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data4x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data5x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data6x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data7x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data8x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
data9x : IN STD_LOGIC_VECTOR (7 DOWNTO 0);
sel : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
result : OUT STD_LOGIC_VECTOR (7 DOWNTO 0)
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_mux3
PORT
(
data0 : IN STD_LOGIC ;
data1 : IN STD_LOGIC ;
sel : IN STD_LOGIC ;
result : OUT STD_LOGIC
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_mux4
PORT
(
data0x : IN STD_LOGIC_VECTOR (6 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (6 DOWNTO 0);
sel : IN STD_LOGIC ;
result : OUT STD_LOGIC_VECTOR (6 DOWNTO 0)
);
end component;
-26
View File
@@ -1,26 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_mux5
PORT
(
data0x : IN STD_LOGIC_VECTOR (63 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (63 DOWNTO 0);
data2x : IN STD_LOGIC_VECTOR (63 DOWNTO 0);
data3x : IN STD_LOGIC_VECTOR (63 DOWNTO 0);
sel : IN STD_LOGIC_VECTOR (1 DOWNTO 0);
result : OUT STD_LOGIC_VECTOR (63 DOWNTO 0)
);
end component;
-31
View File
@@ -1,31 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_mux6
PORT
(
clock : IN STD_LOGIC ;
data0x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
data2x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
data3x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
data4x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
data5x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
data6x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
data7x : IN STD_LOGIC_VECTOR (23 DOWNTO 0);
sel : IN STD_LOGIC_VECTOR (2 DOWNTO 0);
result : OUT STD_LOGIC_VECTOR (23 DOWNTO 0)
);
end component;
-26
View File
@@ -1,26 +0,0 @@
--Copyright (C) 1991-2009 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_muxDZ
PORT
(
clken : IN STD_LOGIC := '1';
clock : IN STD_LOGIC ;
data0x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
sel : IN STD_LOGIC ;
result : OUT STD_LOGIC_VECTOR (127 DOWNTO 0)
);
end component;
-24
View File
@@ -1,24 +0,0 @@
--Copyright (C) 1991-2009 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_muxDZ2
PORT
(
data0 : IN STD_LOGIC ;
data1 : IN STD_LOGIC ;
sel : IN STD_LOGIC ;
result : OUT STD_LOGIC
);
end component;
-38
View File
@@ -1,38 +0,0 @@
--Copyright (C) 1991-2009 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_muxVDM
PORT
(
data0x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data10x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data11x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data12x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data13x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data14x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data15x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data1x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data2x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data3x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data4x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data5x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data6x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data7x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data8x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
data9x : IN STD_LOGIC_VECTOR (127 DOWNTO 0);
sel : IN STD_LOGIC_VECTOR (3 DOWNTO 0);
result : OUT STD_LOGIC_VECTOR (127 DOWNTO 0)
);
end component;
-25
View File
@@ -1,25 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_shiftreg0
PORT
(
clock : IN STD_LOGIC ;
data : IN STD_LOGIC_VECTOR (15 DOWNTO 0);
load : IN STD_LOGIC ;
shiftin : IN STD_LOGIC ;
shiftout : OUT STD_LOGIC
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_shiftreg1
PORT
(
clock : IN STD_LOGIC ;
shiftin : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (1 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_shiftreg2
PORT
(
clock : IN STD_LOGIC ;
shiftin : IN STD_LOGIC ;
shiftout : OUT STD_LOGIC
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_shiftreg3
PORT
(
clock : IN STD_LOGIC ;
shiftin : IN STD_LOGIC ;
shiftout : OUT STD_LOGIC
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_shiftreg4
PORT
(
clock : IN STD_LOGIC ;
shiftin : IN STD_LOGIC ;
shiftout : OUT STD_LOGIC
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_shiftreg5
PORT
(
clock : IN STD_LOGIC ;
shiftin : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (4 DOWNTO 0)
);
end component;
-23
View File
@@ -1,23 +0,0 @@
--Copyright (C) 1991-2008 Altera Corporation
--Your use of Altera Corporation's design tools, logic functions
--and other software and tools, and its AMPP partner logic
--functions, and any output files from any of the foregoing
--(including device programming or simulation files), and any
--associated documentation or information are expressly subject
--to the terms and conditions of the Altera Program License
--Subscription Agreement, Altera MegaCore Function License
--Agreement, or other applicable license agreement, including,
--without limitation, that your use is for the sole purpose of
--programming logic devices manufactured by Altera and sold by
--Altera or its authorized distributors. Please refer to the
--applicable agreement for further details.
component lpm_shiftreg6
PORT
(
clock : IN STD_LOGIC ;
shiftin : IN STD_LOGIC ;
q : OUT STD_LOGIC_VECTOR (4 DOWNTO 0)
);
end component;
-54
View File
@@ -1,54 +0,0 @@
-- Copyright (C) 1991-2014 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
-- PROGRAM "Quartus II 64-Bit"
-- VERSION "Version 13.1.4 Build 182 03/12/2014 SJ Web Edition"
-- CREATED "Mon Jan 11 09:20:56 2016"
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera;
USE altera.maxplus2.all;
LIBRARY work;
ENTITY mux41_0 IS
PORT
(
S0 : IN STD_LOGIC;
S1 : IN STD_LOGIC;
D0 : IN STD_LOGIC;
INH : IN STD_LOGIC;
D1 : IN STD_LOGIC;
Q : OUT STD_LOGIC
);
END mux41_0;
ARCHITECTURE bdf_type OF mux41_0 IS
BEGIN
-- instantiate macrofunction
b2v_inst40 : work.mux41
PORT MAP(S0 => S0,
S1 => S1,
D0 => D0,
INH => INH,
D1 => D1,
D2 => '0',
D3 => '0',
Q => Q);
END bdf_type;
-54
View File
@@ -1,54 +0,0 @@
-- Copyright (C) 1991-2014 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
-- PROGRAM "Quartus II 64-Bit"
-- VERSION "Version 13.1.4 Build 182 03/12/2014 SJ Web Edition"
-- CREATED "Mon Jan 11 09:20:56 2016"
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera;
USE altera.maxplus2.all;
LIBRARY work;
ENTITY mux41_1 IS
PORT
(
S0 : IN STD_LOGIC;
S1 : IN STD_LOGIC;
D0 : IN STD_LOGIC;
INH : IN STD_LOGIC;
D1 : IN STD_LOGIC;
Q : OUT STD_LOGIC
);
END mux41_1;
ARCHITECTURE bdf_type OF mux41_1 IS
BEGIN
-- instantiate macrofunction
b2v_inst41 : work.mux41
PORT MAP(S0 => S0,
S1 => S1,
D0 => D0,
INH => INH,
D1 => D1,
D2 => '0',
D3 => '0',
Q => Q);
END bdf_type;
-55
View File
@@ -1,55 +0,0 @@
-- Copyright (C) 1991-2014 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
-- PROGRAM "Quartus II 64-Bit"
-- VERSION "Version 13.1.4 Build 182 03/12/2014 SJ Web Edition"
-- CREATED "Mon Jan 11 09:20:56 2016"
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera;
USE altera.maxplus2.all;
LIBRARY work;
ENTITY mux41_2 IS
PORT
(
S0 : IN STD_LOGIC;
D2 : IN STD_LOGIC;
S1 : IN STD_LOGIC;
D0 : IN STD_LOGIC;
INH : IN STD_LOGIC;
D1 : IN STD_LOGIC;
Q : OUT STD_LOGIC
);
END mux41_2;
ARCHITECTURE bdf_type OF mux41_2 IS
BEGIN
-- instantiate macrofunction
b2v_inst42 : work.mux41
PORT MAP(S0 => S0,
D2 => D2,
S1 => S1,
D0 => D0,
D3 => '0',
INH => INH,
D1 => D1,
Q => Q);
END bdf_type;
-55
View File
@@ -1,55 +0,0 @@
-- Copyright (C) 1991-2014 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
-- PROGRAM "Quartus II 64-Bit"
-- VERSION "Version 13.1.4 Build 182 03/12/2014 SJ Web Edition"
-- CREATED "Mon Jan 11 09:20:56 2016"
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera;
USE altera.maxplus2.all;
LIBRARY work;
ENTITY mux41_3 IS
PORT
(
S0 : IN STD_LOGIC;
D2 : IN STD_LOGIC;
S1 : IN STD_LOGIC;
D0 : IN STD_LOGIC;
INH : IN STD_LOGIC;
D1 : IN STD_LOGIC;
Q : OUT STD_LOGIC
);
END mux41_3;
ARCHITECTURE bdf_type OF mux41_3 IS
BEGIN
-- instantiate macrofunction
b2v_inst43 : work.mux41
PORT MAP(S0 => S0,
D2 => D2,
S1 => S1,
D0 => D0,
D3 => '0',
INH => INH,
D1 => D1,
Q => Q);
END bdf_type;
-55
View File
@@ -1,55 +0,0 @@
-- Copyright (C) 1991-2014 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
-- PROGRAM "Quartus II 64-Bit"
-- VERSION "Version 13.1.4 Build 182 03/12/2014 SJ Web Edition"
-- CREATED "Mon Jan 11 09:20:56 2016"
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera;
USE altera.maxplus2.all;
LIBRARY work;
ENTITY mux41_4 IS
PORT
(
S0 : IN STD_LOGIC;
D2 : IN STD_LOGIC;
S1 : IN STD_LOGIC;
D0 : IN STD_LOGIC;
INH : IN STD_LOGIC;
D1 : IN STD_LOGIC;
Q : OUT STD_LOGIC
);
END mux41_4;
ARCHITECTURE bdf_type OF mux41_4 IS
BEGIN
-- instantiate macrofunction
b2v_inst44 : work.mux41
PORT MAP(S0 => S0,
D2 => D2,
S1 => S1,
D0 => D0,
D3 => '0',
INH => INH,
D1 => D1,
Q => Q);
END bdf_type;
-56
View File
@@ -1,56 +0,0 @@
-- Copyright (C) 1991-2014 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
-- PROGRAM "Quartus II 64-Bit"
-- VERSION "Version 13.1.4 Build 182 03/12/2014 SJ Web Edition"
-- CREATED "Mon Jan 11 09:20:56 2016"
LIBRARY ieee;
USE ieee.std_logic_1164.all;
LIBRARY altera;
USE altera.maxplus2.all;
LIBRARY work;
ENTITY mux41_5 IS
PORT
(
S0 : IN STD_LOGIC;
D2 : IN STD_LOGIC;
S1 : IN STD_LOGIC;
D0 : IN STD_LOGIC;
INH : IN STD_LOGIC;
D1 : IN STD_LOGIC;
Q : OUT STD_LOGIC
);
END mux41_5;
ARCHITECTURE bdf_type OF mux41_5 IS
BEGIN
-- instantiate macrofunction
b2v_inst45 : work.mux41
PORT MAP(S0 => S0,
D2 => D2,
S1 => S1,
D0 => D0,
D3 => '0',
INH => INH,
D1 => D1,
Q => Q);
END bdf_type;
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
+79
View File
@@ -0,0 +1,79 @@
-- WARNING: Do NOT edit the input and output ports in this file in a text
-- editor if you plan to continue editing the block that represents it in
-- the Block Editor! File corruption is VERY likely to occur.
-- Copyright (C) 1991-2008 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
-- Generated by Quartus II Version 8.1 (Build Build 163 10/28/2008)
-- Created on Tue Sep 08 16:24:57 2009
LIBRARY ieee;
USE ieee.std_logic_1164.all;
-- Entity Declaration
ENTITY DSP IS
-- {{ALTERA_IO_BEGIN}} DO NOT REMOVE THIS LINE!
PORT
(
CLK33M : IN STD_LOGIC;
MAIN_CLK : IN STD_LOGIC;
nFB_OE : IN STD_LOGIC;
nFB_WR : IN STD_LOGIC;
nFB_CS1 : IN STD_LOGIC;
nFB_CS2 : IN STD_LOGIC;
FB_SIZE0 : IN STD_LOGIC;
FB_SIZE1 : IN STD_LOGIC;
nFB_BURST : IN STD_LOGIC;
FB_ADR : IN STD_LOGIC_VECTOR(31 downto 0);
nRSTO : IN STD_LOGIC;
nFB_CS3 : IN STD_LOGIC;
nSRCS : INOUT STD_LOGIC;
nSRBLE : OUT STD_LOGIC;
nSRBHE : OUT STD_LOGIC;
nSRWE : OUT STD_LOGIC;
nSROE : OUT STD_LOGIC;
DSP_INT : OUT STD_LOGIC;
DSP_TA : OUT STD_LOGIC;
FB_AD : INOUT STD_LOGIC_VECTOR(31 downto 0);
IO : INOUT STD_LOGIC_VECTOR(17 downto 0);
SRD : INOUT STD_LOGIC_VECTOR(15 downto 0)
);
-- {{ALTERA_IO_END}} DO NOT REMOVE THIS LINE!
END DSP;
-- Architecture Body
ARCHITECTURE DSP_architecture OF DSP IS
BEGIN
nSRCS <= '0' when nFB_CS2 = '0' and FB_ADR(27 downto 24) = x"4" else '1'; --nFB_CS3;
nSRBHE <= '0' when FB_ADR(0 downto 0) = "0" else '1';
nSRBLE <= '1' when FB_ADR(0 downto 0) = "0" and FB_SIZE1 = '0' and FB_SIZE0 = '1' else '0';
nSRWE <= '0' when nFB_WR = '0' and nSRCS = '0' and MAIN_CLK = '0' else '1';
nSROE <= '0' when nFB_OE = '0' and nSRCS = '0' else '1';
DSP_INT <= '0';
DSP_TA <= '0';
IO(17 downto 0) <= FB_ADR(18 downto 1);
SRD(15 downto 0) <= FB_AD(31 downto 16) when nFB_WR = '0' and nSRCS = '0' else "ZZZZZZZZZZZZZZZZ";
FB_AD(31 downto 16) <= SRD(15 downto 0) when nFB_OE = '0' and nSRCS = '0' else "ZZZZZZZZZZZZZZZZ";
END DSP_architecture;

Some files were not shown because too many files have changed in this diff Show More