Add files via upload

initial upload

flash_scripts/flash_m548x_bas.bdm

@@ -0,0 +1,92 @@
+#!/usr/local/bin/bdmctrl 
+#
+# m548x board initialization for bdmctrl 
+#
+open $1
+reset
+wait
+
+# set VBR
+write-ctrl 0x0801 0x00000000
+dump-register VBR
+
+# Turn on MBAR at 0xFF00_0000
+write-ctrl 0x0C0F 0xFF000000
+dump-register MBAR
+
+# Turn on RAMBAR0 at address FF10_0000 
+write-ctrl 0x0C04 0xFF100007
+
+# Turn on RAMBAR1 at address FF10_1000 (disabled - not mapped by bdm currently)
+write-ctrl 0x0C05 0xFF101001
+
+#
+# Init CS0 (BootFLASH @ E000_0000 - E03F_FFFF 4Mbytes)
+write 0xFF000500 0xE0000000 4
+#write 0xFF000508 0x00041180 4
+write 0xFF000508 0x00100D80 4
+write 0xFF000504 0x003F0001 4
+
+# SDRAM Initialization @ 0000_0000 - 03FF_FFFF 64 Mbytes
+write 0xFF000004 0x000002AA 4 # SDRAMDS configuration
+write 0xFF000020 0x00000019 4 # SDRAM CS0 configuration (128Mbytes 0000_0000 - 07FF_FFFF)
+write 0xFF000024 0x08000000 4 # SDRAM CS1 configuration (128Mbytes 0800_0000 - 0FFF_FFFF)
+write 0xFF000028 0x10000000 4 # SDRAM CS2 configuration (128Mbytes 1000_0000 - 17FF_FFFF)
+write 0xFF00002C 0x18000000 4 # SDRAM CS3 configuration (128Mbytes 1800_0000 - 1FFF_FFFF)
+write 0xFF000108 0x73711630 4 # SDCFG1
+write 0xFF00010C 0x46370000 4 # SDCFG2
+
+write 0xFF000104 0xE10B0002 4 # SDCR + IPALL
+write 0xFF000100 0x40010000 4 # SDMR (write to LEMR)
+write 0xFF000100 0x058D0000 4 # SDMR (write to LMR)
+sleep 100
+write 0xFF000104 0xE10D0002 4 # SDCR + IPALL
+write 0xFF000104 0xE10D0004 4 # SDCR + IREF (first refresh)
+write 0xFF000104 0xE10D0004 4 # SDCR + IREF (first refresh)
+write 0xFF000100 0x018D0000 4 # SDMR (write to LMR)
+write 0xFF000104 0x710D0F00 4 # SDCR (lock SDMR and enable refresh)
+sleep 10
+
+
+# use system sdram as flashlib scratch area.
+# TODO: plugin flashing seems to work o.k. now for smaller binaries, while it doesn't for larger ones (EmuTOS) yet.
+# This seems to be related to large flash buffers and PC-relative adressing of the plugin
+#flash-plugin 0x1000 0xf000 flash29.plugin
+# notify flashlib that we have flash at address 0xE0000000, length 0x7FFFFF, plugin is flash29
+flash 0xE0000000
+#flash-plugin 0x1000 0xf000 flashintelc3.plugin
+
+# Erase flash from 0xE0000000 to 0xE00FFFFF (reserved space for bas)
+#
+# Caution: sector offset numbers need to be the ones from the x16 address range
+# column and they vary in size - needs to be exactly as in the data sheet (p. 9)
+#
+# contrary to documentation, it seems we need to erase-wait after each sector
+
+erase 0xE0000000 0
+erase 0xE0000000 1
+erase 0xE0000000 2
+erase 0xE0000000 3
+erase 0xE0000000 4
+erase 0xE0000000 5
+erase 0xE0000000 6
+erase 0xE0000000 7
+erase 0xE0000000 8
+erase 0xE0000000 9
+erase 0xE0000000 10
+erase 0xE0000000 11
+erase 0xE0000000 12
+erase 0xE0000000 13
+#erase 0xE0000000 0x2000
+#erase 0xE0000000 0x3000
+#erase 0xE0000000 0x4000
+#erase 0xE0000000 0x5000
+#erase 0xE0000000 0x00006000
+#erase 0xE0000000 0x00007000
+#erase 0xE0000000 0x00008000
+#erase 0xE0000000 0x00009000
+#erase 0xE0000000 0x0000a000
+#erase 0xE0000000 0x0000b000
+#erase-wait 0xe0000000
+load -v ../m5484lite/bas.elf
+wait