# Please edit this ST-Guide INF file to your requirements
# ========================================================================
#
# Read this!
# This file can be edited in any ASCII text editor (eg Everest)
# If you experience any problems with ST-Guide try removing 
# ST-GUIDE.INF altogether. ST-Guide then uses its internal defaults.
# If the problem goes away you'll know something is wrong with your 
# ST-GUIDE.INF file.
# This file is configured by default to run from Drive C: but anyone
# running a floppy based system can simply change each occurence of 
# C: to A:
# By default ST-Guide looks in the root directory of your boot drive
# for a 'GUIDES' folder which can be used to store all your 'HYP and 
# 'REF' files.
#
# Lines preceded with a '#' symbol (like this one) are comments and 
# ignored by ST-Guide.
#
#
# Important access paths
#=========================================================================
# Default search path, where ST-Guide looks for 'HYP' hypertexts:
PATHS=c:\guides c:\guides\DE c:\guides\FR c:\guides\RU
#
# HCP is used to compile STG files into HYP files. STool uses this entry
# to find HCP and compile:
HCP=c:\tools\st-gui15\st-guide\hcp.ttp
#
# Hypfind is called by ST-Guide to search for search masks in all pages
# in the current hypertext.
HYPFIND=c:\tools\st-gui15\st-guide\hypfind.ttp
#
# Folder where HCP compiles the HYP file.
#HYPFOLD=c:\guides
#
# The file used to find references:
REF=c:\guides\all.ref
#
# Path for Remarker:
# Without '!' preceding the path Remarker is automatically started on
# opening ST-Guide.
# With '!' preceding the path Remarker is started using [Alternate]+R
#REMARKER=!C:\ST-GUIDE\REMARKER.PRG
#
# An external viewer, which must be memory resident can be used to 
# display unknown file types:
#EXTVIEW
#
# Default path/filename of hypertext automatically loaded by ST-Guide
# if called without parameters (typically ST-GUIDE.HYP or HCP.HYP:
#DEFHYP=C:\GUIDES\ST-GUIDE.HYP
#
# The hypertext file to be loaded via the ST-Guide 'Catalog' option or 
# when ST-Guide is started without parameters:
HYPTOP=c:\guides\catalog.hyp
#
# Whenever 'Print' is selected output is sent to the Clipboard and
# Re-directed to this listed application for output:
#PRINTER=C:\ILIST.ACC
#
# Default directory to save mark files to:
MARKFILE=c:\guides\marks.dat
#
# Colour display options
#=========================================================================
# The following three variables are only relevant in colour resolutions
# and are ignored in monochrome resolutions.
# TXTCOLOR Displays text in the specified colour.
# REFCOLOR Displays references in the specified colour using the
#          normal typestyle (NOT bold and underlined).
# BCK3D    Displays the background in light grey if active, otherwise 
#          it's displayed as white.
#
# Default colours (Note! Your system may change these values!):
#  0=White        1=Black        2=Red           3=Green
#  4=Blue         5=Cyan         6=Yellow        7=Magenta
#  8=Grey         9=Dark grey   10=Dark red     11=Dark green
# 12=Dark blue   13=Dark cyan   14=Dark yellow  15=Dark magenta
TXTCOLOR=1
REFCOLOR=4
#BCK3D
#
# The BCKCOLOR variable has been ignored since ST-Guide v1.5)
#
# ST-Guide window display
#=========================================================================
# ST-Guide can use GDOS screen fonts if loaded, the code determines the
# font used. Contains the font and point size to be used in the 
# following format: FONT,SIZE
FONT=1,10
# A second font can be defined and swapped between using the 
# [Control]+Z key combination - useful for swapping between 
# proportional and non-proportional fonts.
#XFONT=185,10
#
# The first two values set the top left corner of the window. The
# next two values set the bottom right corner for the ST-Guide window:
#WINSIZE=100,100,400,200
#
# Sets the vertical separation in pixels of the window contents from
# the dividing line below the icons. The default value od 6 pixels is 
# applied if this variable is not specified:
#TXTOFFSET
#
# The number of spaces a tab will be expanded to is set here:
#TABSIZE=4
#
# Mouse behaviour
#=========================================================================
# The RIGHTBACK variable, if set, means a right mouse click is 
# interpreted as a click on the Back icon:
#RIGHTBACK
#
# If this variable is active, clicking on 'normal' text does not cause
# ST-Guide to search for references.
REFONLY
#
# The BACKWIND variable, if set, means a right click will top a 
# background ST-Guide window:
#BACKWIND
#
# Miscellaneous
#=========================================================================
# These options are used automatically when HCP is called:
#HCP_OPT=
#
# This variable is provided to install ARROWPATCH. This patch corrects a 
# bug in the AES which prevents the scroll bars in windowed accessories
# from working correctly with certain TOS versions.
# If you exerience this behaviour activate this patch ON (by removing
# the preceding #).
# This patch is not needed if you are running WINX, MagiC, MTOS or 
# already have the ARROWPATCH installed globally.
#ARROWPATCH
#
# This variable prevents the Find box with a word in a REF-file, from 
# being displayed:
#NOREFBOX
#
# Special HypTree options
#=========================================================================
# Here the default size of the HypTree window can be displayed.
# If these variables are not defined, the size and position of the last
# window will be used, if available.
HT_WINSIZE=40,40,100,200
#
# Using this switch you can decide whether all pages included in the 
# HypTree structure are visible (0 = No, 1 = Yes)
HT_OPENALL=1
#
# This variable sets the position of the triangle in the window
# 0 = next to the text, 1 = On the left hand margin of the window.
HT_MACLIKE=0
#
# The following command line is sent to HypTree from ST-Guide (via
# VA_START) after the user double clicks on the menu bar title in any
# hypertext page. The following strings are replaced with the actual 
# values when called:
# %p  Pathname of the hypertext file
# %n  Name of the hypertext file (without path)
# %s  The internal name of the hypertext page
HT_CALLSTG=-s1 %p %s
#
# The following command line is sent to ST-Guide from HypTree as soon 
# as the current hypertext is closed:
HT_STOPSTG=-s0
#
$STOOL=c:\stgui15\st-guide\stool.tos
#
# That's all folks!