1633 lines
49 KiB
C
1633 lines
49 KiB
C
/*
|
|
* Modified for Atari by David Gálvez 2010
|
|
* Modified for Atari by Didier Mequignon 2009
|
|
*
|
|
* Most of this source has been derived from the Linux USB
|
|
* project:
|
|
* (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
|
|
* (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
|
|
* (c) 1999 Michael Gee (michael@linuxspecific.com)
|
|
* (c) 2000 Yggdrasil Computing, Inc.
|
|
*
|
|
*
|
|
* Adapted for U-Boot:
|
|
* (C) Copyright 2001 Denis Peter, MPL AG Switzerland
|
|
*
|
|
* For BBB support (C) Copyright 2003
|
|
* Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
|
|
*
|
|
* BBB support based on /sys/dev/usb/umass.c from
|
|
* FreeBSD.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
/* Note:
|
|
* Currently only the CBI transport protocoll has been implemented, and it
|
|
* is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB
|
|
* transport protocoll may work as well.
|
|
*/
|
|
/*
|
|
* New Note:
|
|
* Support for USB Mass Storage Devices (BBB) has been added. It has
|
|
* only been tested with USB memory sticks.
|
|
*/
|
|
|
|
#include "config.h"
|
|
#include "usb.h"
|
|
#include "scsi.h"
|
|
#include "super.h"
|
|
#include "debug.h"
|
|
|
|
#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined(CONFIG_USB_EHCI) \
|
|
|| defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_ARANYM_HCD)
|
|
#ifdef CONFIG_USB_STORAGE
|
|
|
|
/*
|
|
* Extra debug to the one availble in config.h
|
|
* These three extra debug levels go always to the log file
|
|
* uncomment them if you want them on
|
|
*/
|
|
//#define USB_STOR_DEBUG
|
|
//#define BBB_COMDAT_TRACE
|
|
//#define BBB_XPORT_TRACE
|
|
|
|
|
|
extern void udelay(long usec);
|
|
extern void ltoa(char *buf, long n, unsigned long base);
|
|
|
|
/* direction table -- this indicates the direction of the data
|
|
* transfer for each command code -- a 1 indicates input
|
|
*/
|
|
unsigned char us_direction[256/8] = {
|
|
0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
|
|
0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
#define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
|
|
|
|
static unsigned char *usb_stor_buf;
|
|
static ccb usb_ccb;
|
|
|
|
/*
|
|
* CBI style
|
|
*/
|
|
|
|
#define US_CBI_ADSC 0
|
|
|
|
/*
|
|
* BULK only
|
|
*/
|
|
#define US_BBB_RESET 0xff
|
|
#define US_BBB_GET_MAX_LUN 0xfe
|
|
|
|
/* Command Block Wrapper */
|
|
typedef struct {
|
|
__u32 dCBWSignature;
|
|
# define CBWSIGNATURE 0x43425355
|
|
__u32 dCBWTag;
|
|
__u32 dCBWDataTransferLength;
|
|
__u8 bCBWFlags;
|
|
# define CBWFLAGS_OUT 0x00
|
|
# define CBWFLAGS_IN 0x80
|
|
__u8 bCBWLUN;
|
|
__u8 bCDBLength;
|
|
# define CBWCDBLENGTH 16
|
|
__u8 CBWCDB[CBWCDBLENGTH];
|
|
} umass_bbb_cbw_t;
|
|
#define UMASS_BBB_CBW_SIZE 31
|
|
static __u32 CBWTag;
|
|
|
|
/* Command Status Wrapper */
|
|
typedef struct {
|
|
__u32 dCSWSignature;
|
|
# define CSWSIGNATURE 0x53425355
|
|
__u32 dCSWTag;
|
|
__u32 dCSWDataResidue;
|
|
__u8 bCSWStatus;
|
|
# define CSWSTATUS_GOOD 0x0
|
|
# define CSWSTATUS_FAILED 0x1
|
|
# define CSWSTATUS_PHASE 0x2
|
|
} umass_bbb_csw_t;
|
|
#define UMASS_BBB_CSW_SIZE 13
|
|
|
|
//#define USB_MAX_STOR_DEV 5 /* GALVEZ: Defined in usb.h */
|
|
static int usb_max_devs; /* number of highest available usb device */
|
|
|
|
static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV];
|
|
|
|
struct us_data;
|
|
typedef int (*trans_cmnd)(ccb *cb, struct us_data *data);
|
|
typedef int (*trans_reset)(struct us_data *data);
|
|
|
|
struct us_data {
|
|
struct usb_device *pusb_dev; /* this usb_device */
|
|
|
|
unsigned int flags; /* from filter initially */
|
|
unsigned char ifnum; /* interface number */
|
|
unsigned char ep_in; /* in endpoint */
|
|
unsigned char ep_out; /* out ....... */
|
|
unsigned char ep_int; /* interrupt . */
|
|
unsigned char subclass; /* as in overview */
|
|
unsigned char protocol; /* .............. */
|
|
unsigned char attention_done; /* force attn on first cmd */
|
|
unsigned short ip_data; /* interrupt data */
|
|
int action; /* what to do */
|
|
int ip_wanted; /* needed */
|
|
int *irq_handle; /* for USB int requests */
|
|
unsigned int irqpipe; /* pipe for release_irq */
|
|
unsigned char irqmaxp; /* max packed for irq Pipe */
|
|
unsigned char irqinterval; /* Intervall for IRQ Pipe */
|
|
ccb *srb; /* current srb */
|
|
trans_reset transport_reset; /* reset routine */
|
|
trans_cmnd transport; /* transport routine */
|
|
};
|
|
|
|
static struct us_data usb_stor[USB_MAX_STOR_DEV];
|
|
|
|
#define USB_STOR_TRANSPORT_GOOD 0
|
|
#define USB_STOR_TRANSPORT_FAILED -1
|
|
#define USB_STOR_TRANSPORT_ERROR -2
|
|
|
|
#define DEFAULT_SECTOR_SIZE 512
|
|
|
|
#define DOS_PART_TBL_OFFSET 0x1be
|
|
#define DOS_PART_MAGIC_OFFSET 0x1fe
|
|
#define DOS_PBR_FSTYPE_OFFSET 0x36
|
|
#define DOS_PBR_MEDIA_TYPE_OFFSET 0x15
|
|
#define DOS_MBR 0
|
|
#define DOS_PBR 1
|
|
#define DOS_FS_TYPE_OFFSET 0x36
|
|
|
|
typedef struct dos_partition {
|
|
unsigned char boot_ind; /* 0x80 - active */
|
|
unsigned char head; /* starting head */
|
|
unsigned char sector; /* starting sector */
|
|
unsigned char cyl; /* starting cylinder */
|
|
unsigned char sys_ind; /* What partition type */
|
|
unsigned char end_head; /* end head */
|
|
unsigned char end_sector; /* end sector */
|
|
unsigned char end_cyl; /* end cylinder */
|
|
unsigned char start4[4]; /* starting sector counting from 0 */
|
|
unsigned char size4[4]; /* nr of sectors in partition */
|
|
} dos_partition_t;
|
|
|
|
typedef struct disk_partition {
|
|
unsigned long type;
|
|
unsigned long start; /* # of first block in partition */
|
|
unsigned long size; /* number of blocks in partition */
|
|
unsigned long blksz; /* block size in bytes */
|
|
} disk_partition_t;
|
|
|
|
//extern unsigned long swap_long(unsigned long val);
|
|
#define le32_to_int(a) swap_32(*(unsigned long *)a)
|
|
|
|
int usb_stor_get_info(struct usb_device *dev, struct us_data *us, block_dev_desc_t *dev_desc);
|
|
int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, struct us_data *ss);
|
|
unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer);
|
|
unsigned long usb_stor_write(int device, unsigned long blknr, unsigned long blkcnt, const void *buffer);
|
|
struct usb_device * usb_get_dev_index(int index);
|
|
void uhci_show_temp_int_td(void);
|
|
|
|
block_dev_desc_t *usb_stor_get_dev(int idx)
|
|
{
|
|
return(idx < USB_MAX_STOR_DEV) ? &usb_dev_desc[idx] : NULL;
|
|
}
|
|
|
|
void init_part(block_dev_desc_t *dev_desc)
|
|
{
|
|
unsigned char *buffer = (unsigned char *)usb_malloc(DEFAULT_SECTOR_SIZE);
|
|
if(buffer == NULL)
|
|
return;
|
|
if((dev_desc->block_read(dev_desc->dev, 0, 1, (unsigned long *)buffer) != 1)
|
|
|| (buffer[DOS_PART_MAGIC_OFFSET + 0] != 0x55) || (buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa))
|
|
{
|
|
usb_free(buffer);
|
|
return;
|
|
}
|
|
dev_desc->part_type = PART_TYPE_DOS;
|
|
DEBUG_STORAGE("DOS partition table found\r\n");
|
|
#ifdef USB_STOR_DEBUG
|
|
{
|
|
debug_init("usb.log");
|
|
int j;
|
|
for(j = 0; j < 512; j++)
|
|
{
|
|
if((j & 15) == 0)
|
|
debug("\r\n%04X ", j);
|
|
debug("%02X ", buffer[j]);
|
|
if((j & 15) == 15)
|
|
{
|
|
int k;
|
|
for(k = j-15; k <= j; k++)
|
|
{
|
|
if(buffer[k] < ' ' || buffer[k] >= 127)
|
|
debug(".");
|
|
else
|
|
debug("%c", buffer[k]);
|
|
}
|
|
}
|
|
}
|
|
debug("\r\n");
|
|
debug_exit();
|
|
}
|
|
#endif
|
|
usb_free(buffer);
|
|
}
|
|
|
|
static inline int is_extended(int part_type)
|
|
{
|
|
return(part_type == 0x5 || part_type == 0xf || part_type == 0x85);
|
|
}
|
|
|
|
/* Print a partition that is relative to its Extended partition table
|
|
*/
|
|
static int get_partition_info_extended(block_dev_desc_t *dev_desc, int ext_part_sector, int relative, int part_num, int which_part, disk_partition_t *info)
|
|
{
|
|
dos_partition_t *pt;
|
|
int i;
|
|
unsigned char *buffer = (unsigned char *)usb_malloc(DEFAULT_SECTOR_SIZE);
|
|
|
|
if(buffer == NULL)
|
|
return -1;
|
|
if(dev_desc->block_read(dev_desc->dev, ext_part_sector, 1, (unsigned long *)buffer) != 1)
|
|
{
|
|
DEBUG_STORAGE("Can't read partition table on %d:%d\r\n", dev_desc->dev, ext_part_sector);
|
|
usb_free(buffer);
|
|
return -1;
|
|
}
|
|
if(buffer[DOS_PART_MAGIC_OFFSET] != 0x55 || buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa)
|
|
{
|
|
DEBUG_STORAGE("bad MBR sector signature 0x%02x%02x\n", buffer[DOS_PART_MAGIC_OFFSET], buffer[DOS_PART_MAGIC_OFFSET + 1]);
|
|
usb_free(buffer);
|
|
return -1;
|
|
}
|
|
/* Print all primary/logical partitions */
|
|
pt = (dos_partition_t *)(buffer + DOS_PART_TBL_OFFSET);
|
|
for(i = 0; i < 4; i++, pt++)
|
|
{
|
|
/* fdisk does not show the extended partitions that are not in the MBR */
|
|
if((pt->sys_ind != 0) && (part_num == which_part) && (is_extended(pt->sys_ind) == 0))
|
|
{
|
|
info->type = (unsigned long)pt->sys_ind;
|
|
info->blksz = 512;
|
|
info->start = ext_part_sector + le32_to_int(pt->start4);
|
|
info->size = le32_to_int(pt->size4);
|
|
DEBUG_STORAGE("DOS partition at offset 0x%lx, size 0x%lx, type 0x%x %s\r\n",
|
|
info->start, info->size, pt->sys_ind,
|
|
(is_extended(pt->sys_ind) ? " Extd" : ""));
|
|
usb_free(buffer);
|
|
return 0;
|
|
}
|
|
/* Reverse engr the fdisk part# assignment rule! */
|
|
if((ext_part_sector == 0) || (pt->sys_ind != 0 && !is_extended (pt->sys_ind)))
|
|
part_num++;
|
|
}
|
|
/* Follows the extended partitions */
|
|
pt = (dos_partition_t *)(buffer + DOS_PART_TBL_OFFSET);
|
|
for(i = 0; i < 4; i++, pt++)
|
|
{
|
|
if(is_extended(pt->sys_ind))
|
|
{
|
|
int lba_start = le32_to_int(pt->start4) + relative;
|
|
usb_free(buffer);
|
|
return get_partition_info_extended(dev_desc, lba_start, ext_part_sector == 0 ? lba_start : relative, part_num, which_part, info);
|
|
}
|
|
}
|
|
usb_free(buffer);
|
|
return -1;
|
|
}
|
|
|
|
int fat_register_device(block_dev_desc_t *dev_desc, int part_no, unsigned long *part_type, unsigned long *part_offset, unsigned long *part_size)
|
|
{
|
|
unsigned char *buffer;
|
|
disk_partition_t info;
|
|
|
|
if(!dev_desc->block_read)
|
|
return -1;
|
|
|
|
buffer = (unsigned char *)usb_malloc(DEFAULT_SECTOR_SIZE);
|
|
if(buffer == NULL)
|
|
return -1;
|
|
/* check if we have a MBR (on floppies we have only a PBR) */
|
|
|
|
if(dev_desc->block_read(dev_desc->dev, 0, 1, (unsigned long *)buffer) != 1)
|
|
{
|
|
DEBUG_STORAGE("Can't read from device %d\r\n", dev_desc->dev);
|
|
usb_free(buffer);
|
|
return -1;
|
|
}
|
|
|
|
if(buffer[DOS_PART_MAGIC_OFFSET] != 0x55 || buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa)
|
|
{
|
|
/* no signature found */
|
|
usb_free(buffer);
|
|
return -1;
|
|
}
|
|
|
|
/* First we assume, there is a MBR */
|
|
if(!get_partition_info_extended(dev_desc, 0, 0, 1, part_no, &info))
|
|
{
|
|
*part_type = info.type;
|
|
*part_offset = info.start;
|
|
*part_size = info.size;
|
|
}
|
|
else if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET], "FAT", 3))
|
|
{
|
|
/* ok, we assume we are on a PBR only */
|
|
*part_type = 0;
|
|
*part_offset = 0;
|
|
*part_size = 0;
|
|
}
|
|
else
|
|
{
|
|
DEBUG_STORAGE("Partition %d not valid on device %d\r\n", part_no, dev_desc->dev);
|
|
usb_free(buffer);
|
|
return -1;
|
|
}
|
|
usb_free(buffer);
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_USB_OHCI) || defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_ARANYM_HCD)
|
|
|
|
void dev_print(block_dev_desc_t *dev_desc)
|
|
{
|
|
#ifdef CONFIG_LBA48
|
|
uint64_t lba512; /* number of blocks if 512bytes block size */
|
|
#else
|
|
lbaint_t lba512;
|
|
#endif
|
|
if(dev_desc->type == DEV_TYPE_UNKNOWN)
|
|
{
|
|
printf("not available\r\n");
|
|
DEBUG_STORAGE("not available\r\n");
|
|
return;
|
|
}
|
|
DEBUG_STORAGE("Vendor: %s Rev: %s Prod: %s\r\n", dev_desc->vendor, dev_desc->revision, dev_desc->product);
|
|
DEBUG_STORAGE("\r\n");
|
|
printf("Vendor: %s Rev: %s Prod: %s\r\n", dev_desc->vendor, dev_desc->revision, dev_desc->product);
|
|
printf("\r\n");
|
|
if((dev_desc->lba * dev_desc->blksz) > 0L)
|
|
{
|
|
unsigned long mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
|
|
lbaint_t lba = dev_desc->lba;
|
|
lba512 = (lba * (dev_desc->blksz / 512));
|
|
mb = (10 * lba512) / 2048; /* 2048 = (1024 * 1024) / 512 MB */
|
|
/* round to 1 digit */
|
|
mb_quot = mb / 10;
|
|
mb_rem = mb - (10 * mb_quot);
|
|
gb = mb / 1024;
|
|
gb_quot = gb / 10;
|
|
gb_rem = gb - (10 * gb_quot);
|
|
#ifdef CONFIG_LBA48
|
|
if(dev_desc->lba48)
|
|
printf("Supports 48-bit addressing\r\n");
|
|
#endif
|
|
DEBUG_STORAGE("Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\r\n", mb_quot, mb_rem, gb_quot, gb_rem, (unsigned long)lba, dev_desc->blksz);
|
|
printf("Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\r\n", mb_quot, mb_rem, gb_quot, gb_rem, (unsigned long)lba, dev_desc->blksz);
|
|
}
|
|
else {
|
|
DEBUG_STORAGE("Capacity: not available\r\n");
|
|
printf("Capacity: not available\r\n");
|
|
}
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* show info on storage devices; 'usb start/init' must be invoked earlier
|
|
* as we only retrieve structures populated during devices initialization
|
|
*/
|
|
int usb_stor_info(void)
|
|
{
|
|
int i;
|
|
if(usb_max_devs > 0)
|
|
{
|
|
for(i = 0; i < usb_max_devs; i++)
|
|
{
|
|
DEBUG_STORAGE("Device %d: ", i);
|
|
printf("Device %d: ", i);
|
|
dev_print(&usb_dev_desc[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
DEBUG_STORAGE("No storage devices\r\n");
|
|
printf("No storage devices\r\n");
|
|
return 1;
|
|
}
|
|
|
|
#endif /* CONFIG_USB_OHCI */
|
|
|
|
/*******************************************************************************
|
|
* scan the usb and reports device info to the user
|
|
* returns current device or -1 if no
|
|
*/
|
|
int usb_stor_scan(void)
|
|
{
|
|
unsigned char i;
|
|
struct usb_device *dev;
|
|
DEBUG_STORAGE("usb_stor_scan()"); /* Galvez: Debug trace */
|
|
if(usb_stor_buf == NULL)
|
|
usb_stor_buf = (unsigned char *)usb_malloc(512);
|
|
if(usb_stor_buf == NULL)
|
|
return -1;
|
|
memset(usb_stor_buf, 0, sizeof(usb_stor_buf));
|
|
usb_disable_asynch(1); /* asynch transfer not allowed */
|
|
for(i = 0; i < USB_MAX_STOR_DEV; i++)
|
|
{
|
|
memset(&usb_dev_desc[i], 0, sizeof(block_dev_desc_t));
|
|
usb_dev_desc[i].target = 0xff;
|
|
usb_dev_desc[i].if_type = IF_TYPE_USB;
|
|
usb_dev_desc[i].dev = i;
|
|
usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
|
|
usb_dev_desc[i].block_read = usb_stor_read;
|
|
usb_dev_desc[i].block_write = usb_stor_write;
|
|
}
|
|
usb_max_devs = 0;
|
|
for(i = 0; i < USB_MAX_DEVICE; i++)
|
|
{
|
|
dev = usb_get_dev_index(i); /* get device */
|
|
if(dev == NULL)
|
|
break; /* no more devices avaiable */
|
|
DEBUG_STORAGE("Device %d\r\n", i);
|
|
if(usb_storage_probe(dev, 0, &usb_stor[usb_max_devs]))
|
|
{
|
|
/* ok, it is a storage devices
|
|
* get info and fill it in
|
|
*/
|
|
if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs]))
|
|
usb_max_devs++;
|
|
}
|
|
/* if storage device */
|
|
if(usb_max_devs == USB_MAX_STOR_DEV)
|
|
{
|
|
printf("Max USB Storage Device reached: %d stopping\r\n", usb_max_devs);
|
|
break;
|
|
}
|
|
} /* for */
|
|
usb_disable_asynch(0); /* asynch transfer allowed */
|
|
DEBUG_STORAGE("%d Storage Device(s) found\r\n", usb_max_devs);
|
|
printf("%d Storage Device(s) found\r\n", usb_max_devs);
|
|
if(usb_max_devs > 0)
|
|
return 0;
|
|
return -1;
|
|
}
|
|
|
|
static int usb_stor_irq(struct usb_device *dev)
|
|
{
|
|
struct us_data *us;
|
|
us = (struct us_data *)dev->privptr;
|
|
if(us->ip_wanted)
|
|
us->ip_wanted = 0;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef USB_STOR_DEBUG
|
|
|
|
static void usb_show_srb(ccb *pccb)
|
|
{
|
|
int i;
|
|
debug_init("usb.log");
|
|
debug("SRB: len %d datalen 0x%lX\r\n ", pccb->cmdlen, pccb->datalen);
|
|
for (i = 0; i < 12; i++)
|
|
debug("%02X ", pccb->cmd[i]);
|
|
debug("\r\n");
|
|
debug_exit();
|
|
}
|
|
|
|
static void display_int_status(unsigned long tmp)
|
|
{
|
|
debug_init("usb.log");
|
|
debug("Status: %s %s %s %s %s %s %s\r\n",
|
|
(tmp & USB_ST_ACTIVE) ? "Active" : "",
|
|
(tmp & USB_ST_STALLED) ? "Stalled" : "",
|
|
(tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "",
|
|
(tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "",
|
|
(tmp & USB_ST_NAK_REC) ? "NAKed" : "",
|
|
(tmp & USB_ST_CRC_ERR) ? "CRC Error" : "",
|
|
(tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : "");
|
|
debug_exit();
|
|
}
|
|
|
|
#endif
|
|
|
|
/***********************************************************************
|
|
* Data transfer routines
|
|
***********************************************************************/
|
|
|
|
static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length)
|
|
{
|
|
int max_size;
|
|
int this_xfer;
|
|
int result;
|
|
int partial;
|
|
int maxtry;
|
|
int stat;
|
|
/* determine the maximum packet size for these transfers */
|
|
max_size = usb_maxpacket(us->pusb_dev, pipe) * 16;
|
|
/* while we have data left to transfer */
|
|
while(length)
|
|
{
|
|
/* calculate how long this will be -- maximum or a remainder */
|
|
this_xfer = length > max_size ? max_size : length;
|
|
length -= this_xfer;
|
|
/* setup the retry counter */
|
|
maxtry = 10;
|
|
/* set up the transfer loop */
|
|
do
|
|
{
|
|
/* transfer the data */
|
|
DEBUG_STORAGE("Bulk xfer 0x%x(%d) try #%d\r\n", (unsigned int)buf, this_xfer, 11 - maxtry);
|
|
result = usb_bulk_msg(us->pusb_dev, pipe, buf, this_xfer, &partial, USB_CNTL_TIMEOUT * 5);
|
|
DEBUG_STORAGE("bulk_msg returned %d xferred %d/%d\r\n", result, partial, this_xfer);
|
|
if(us->pusb_dev->status != 0)
|
|
{
|
|
/* if we stall, we need to clear it before we go on */
|
|
#ifdef USB_STOR_DEBUG
|
|
display_int_status(us->pusb_dev->status);
|
|
#endif
|
|
if(us->pusb_dev->status & USB_ST_STALLED)
|
|
{
|
|
DEBUG_STORAGE("stalled ->clearing endpoint halt for pipe 0x%x\r\n", pipe);
|
|
stat = us->pusb_dev->status;
|
|
usb_clear_halt(us->pusb_dev, pipe);
|
|
us->pusb_dev->status = stat;
|
|
if(this_xfer == partial)
|
|
{
|
|
DEBUG_STORAGE("bulk transferred with error %lX, but data ok\r\n", us->pusb_dev->status);
|
|
return 0;
|
|
}
|
|
else
|
|
return result;
|
|
}
|
|
if(us->pusb_dev->status & USB_ST_NAK_REC)
|
|
{
|
|
DEBUG_STORAGE("Device NAKed bulk_msg\r\n");
|
|
return result;
|
|
}
|
|
DEBUG_STORAGE("bulk transferred with error");
|
|
if(this_xfer == partial)
|
|
{
|
|
DEBUG_STORAGE(" %ld, but data ok\r\n", us->pusb_dev->status);
|
|
return 0;
|
|
}
|
|
/* if our try counter reaches 0, bail out */
|
|
DEBUG_STORAGE(" %ld, data %d\r\n", us->pusb_dev->status, partial);
|
|
if(!maxtry--)
|
|
return result;
|
|
}
|
|
/* update to show what data was transferred */
|
|
this_xfer -= partial;
|
|
buf += partial;
|
|
/* continue until this transfer is done */
|
|
} while (this_xfer);
|
|
}
|
|
/* if we get here, we're done and successful */
|
|
return 0;
|
|
}
|
|
|
|
static int usb_stor_BBB_reset(struct us_data *us)
|
|
{
|
|
int result;
|
|
unsigned int pipe;
|
|
/*
|
|
* Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class)
|
|
*
|
|
* For Reset Recovery the host shall issue in the following order:
|
|
* a) a Bulk-Only Mass Storage Reset
|
|
* b) a Clear Feature HALT to the Bulk-In endpoint
|
|
* c) a Clear Feature HALT to the Bulk-Out endpoint
|
|
*
|
|
* This is done in 3 steps.
|
|
*
|
|
* If the reset doesn't succeed, the device should be port reset.
|
|
*
|
|
* This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
|
|
*/
|
|
DEBUG_STORAGE("BBB_reset\r\n");
|
|
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
|
|
US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT * 5);
|
|
if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED))
|
|
{
|
|
DEBUG_STORAGE("RESET:stall\r\n");
|
|
return -1;
|
|
}
|
|
/* long wait for reset */
|
|
wait_ms(150);
|
|
DEBUG_STORAGE("BBB_reset result %d: status %lX reset\r\n", result, us->pusb_dev->status);
|
|
pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
|
|
result = usb_clear_halt(us->pusb_dev, pipe);
|
|
/* long wait for reset */
|
|
wait_ms(150);
|
|
DEBUG_STORAGE("BBB_reset result %d: status %lX clearing IN endpoint\r\n", result, us->pusb_dev->status);
|
|
/* long wait for reset */
|
|
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
|
|
result = usb_clear_halt(us->pusb_dev, pipe);
|
|
wait_ms(150);
|
|
DEBUG_STORAGE("BBB_reset result %d: status %lX clearing OUT endpoint\r\n", result, us->pusb_dev->status);
|
|
DEBUG_STORAGE("BBB_reset done\r\n");
|
|
return 0;
|
|
}
|
|
|
|
/* FIXME: this reset function doesn't really reset the port, and it
|
|
* should. Actually it should probably do what it's doing here, and
|
|
* reset the port physically
|
|
*/
|
|
static int usb_stor_CB_reset(struct us_data *us)
|
|
{
|
|
unsigned char cmd[12];
|
|
int result;
|
|
DEBUG_STORAGE("CB_reset\r\n");
|
|
memset(cmd, 0xff, sizeof(cmd));
|
|
cmd[0] = SCSI_SEND_DIAG;
|
|
cmd[1] = 4;
|
|
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
|
|
US_CBI_ADSC, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, cmd, sizeof(cmd), USB_CNTL_TIMEOUT * 5);
|
|
/* long wait for reset */
|
|
wait_ms(1500);
|
|
DEBUG_STORAGE("CB_reset result %d: status %lX clearing endpoint halt\r\n", result, us->pusb_dev->status);
|
|
usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
|
|
usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
|
|
DEBUG_STORAGE("CB_reset done\r\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up the command for a BBB device. Note that the actual SCSI
|
|
* command is copied into cbw.CBWCDB.
|
|
*/
|
|
int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
|
|
{
|
|
int result;
|
|
int actlen;
|
|
int dir_in;
|
|
unsigned int pipe;
|
|
umass_bbb_cbw_t *cbw = (umass_bbb_cbw_t *)usb_malloc(sizeof(umass_bbb_cbw_t));
|
|
if(cbw == NULL)
|
|
{
|
|
DEBUG_STORAGE("usb_stor_BBB_comdat: out of memory\r\n");
|
|
return -1;
|
|
}
|
|
dir_in = US_DIRECTION(srb->cmd[0]);
|
|
DEBUG_STORAGE("usb_stor_BBB_comdat: dir_in: %d\r\n",dir_in);
|
|
#ifdef BBB_COMDAT_TRACE
|
|
debug_init ("usb.log");
|
|
debug("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\r\n", dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen, srb->pdata);
|
|
if(srb->cmdlen)
|
|
{
|
|
for(result = 0; result < srb->cmdlen; result++)
|
|
debug("cmd[%d] %#x ", result, srb->cmd[result]);
|
|
debug("\r\n");
|
|
}
|
|
debug_exit( );
|
|
#endif
|
|
/* sanity checks */
|
|
if(!(srb->cmdlen <= CBWCDBLENGTH))
|
|
{
|
|
DEBUG_STORAGE("usb_stor_BBB_comdat: cmdlen too large\r\n");
|
|
usb_free(cbw);
|
|
return -1;
|
|
}
|
|
/* always OUT to the ep */
|
|
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
|
|
cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
|
|
cbw->dCBWTag = cpu_to_le32(CBWTag++);
|
|
cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
|
|
cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
|
|
cbw->bCBWLUN = srb->lun;
|
|
cbw->bCDBLength = srb->cmdlen;
|
|
/* copy the command data into the CBW command data buffer */
|
|
/* DST SRC LEN!!! */
|
|
memcpy(&cbw->CBWCDB, srb->cmd, srb->cmdlen);
|
|
|
|
result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE, &actlen, USB_CNTL_TIMEOUT * 5);
|
|
if(result < 0)
|
|
{ DEBUG_STORAGE("usb_stor_BBB_comdat:usb_bulk_msg error\r\n");}
|
|
usb_free(cbw);
|
|
return result;
|
|
}
|
|
|
|
/* FIXME: we also need a CBI_command which sets up the completion
|
|
* interrupt, and waits for it
|
|
*/
|
|
int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
|
|
{
|
|
int result = 0;
|
|
int dir_in, retry;
|
|
unsigned int pipe;
|
|
unsigned long status;
|
|
retry = 5;
|
|
dir_in = US_DIRECTION(srb->cmd[0]);
|
|
if(dir_in)
|
|
pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
|
|
else
|
|
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
|
|
while(retry--)
|
|
{
|
|
DEBUG_STORAGE("CBI gets a command: Try %d\r\n", 5 - retry);
|
|
#ifdef USB_STOR_DEBUG
|
|
usb_show_srb(srb);
|
|
#endif
|
|
/* let's send the command via the control pipe */
|
|
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev , 0),
|
|
US_CBI_ADSC, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, srb->cmd, srb->cmdlen, USB_CNTL_TIMEOUT * 5);
|
|
DEBUG_STORAGE("CB_transport: control msg returned %d, status %lX\r\n", result, us->pusb_dev->status);
|
|
/* check the return code for the command */
|
|
if(result < 0)
|
|
{
|
|
if(us->pusb_dev->status & USB_ST_STALLED)
|
|
{
|
|
status = us->pusb_dev->status;
|
|
DEBUG_STORAGE(" stall during command found, clear pipe\r\n");
|
|
usb_clear_halt(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0));
|
|
us->pusb_dev->status = status;
|
|
}
|
|
DEBUG_STORAGE(" error during command %02X Stat = %lX\r\n", srb->cmd[0], us->pusb_dev->status);
|
|
return result;
|
|
}
|
|
/* transfer the data payload for this command, if one exists*/
|
|
DEBUG_STORAGE("CB_transport: control msg returned %d, direction is %s to go 0x%lx\r\n", result, dir_in ? "IN" : "OUT", srb->datalen);
|
|
if(srb->datalen)
|
|
{
|
|
result = us_one_transfer(us, pipe, (char *)srb->pdata, srb->datalen);
|
|
DEBUG_STORAGE("CBI attempted to transfer data, result is %d status %lX, len %d\r\n", result, us->pusb_dev->status, us->pusb_dev->act_len);
|
|
if(!(us->pusb_dev->status & USB_ST_NAK_REC))
|
|
break;
|
|
} /* if(srb->datalen) */
|
|
else
|
|
break;
|
|
}
|
|
/* return result */
|
|
return result;
|
|
}
|
|
|
|
int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
|
|
{
|
|
int timeout;
|
|
us->ip_wanted = 1;
|
|
submit_int_msg(us->pusb_dev, us->irqpipe, (void *) &us->ip_data, us->irqmaxp, us->irqinterval);
|
|
timeout = 1000;
|
|
while(timeout--)
|
|
{
|
|
if((volatile int *) us->ip_wanted == 0)
|
|
break;
|
|
wait_ms(10);
|
|
}
|
|
if(us->ip_wanted)
|
|
{
|
|
DEBUG_STORAGE("Did not get interrupt on CBI\r\n");
|
|
printf("Did not get interrupt on CBI\r\n");
|
|
us->ip_wanted = 0;
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
DEBUG_STORAGE("Got interrupt data 0x%x, transfered %d status 0x%lX\r\n", us->ip_data, us->pusb_dev->irq_act_len, us->pusb_dev->irq_status);
|
|
/* UFI gives us ASC and ASCQ, like a request sense */
|
|
if(us->subclass == US_SC_UFI)
|
|
{
|
|
if(srb->cmd[0] == SCSI_REQ_SENSE || srb->cmd[0] == SCSI_INQUIRY)
|
|
return USB_STOR_TRANSPORT_GOOD; /* Good */
|
|
else if(us->ip_data)
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
else
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
}
|
|
/* otherwise, we interpret the data normally */
|
|
switch(us->ip_data)
|
|
{
|
|
case 0x0001: return USB_STOR_TRANSPORT_GOOD;
|
|
case 0x0002: return USB_STOR_TRANSPORT_FAILED;
|
|
default: return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
|
|
#define USB_TRANSPORT_UNKNOWN_RETRY 5
|
|
#define USB_TRANSPORT_NOT_READY_RETRY 10
|
|
|
|
/* clear a stall on an endpoint - special for BBB devices */
|
|
int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
|
|
{
|
|
int result;
|
|
/* ENDPOINT_HALT = 0, so set value to 0 */
|
|
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
|
|
USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0, endpt, 0, 0, USB_CNTL_TIMEOUT * 5);
|
|
return result;
|
|
}
|
|
|
|
int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
|
|
{
|
|
int result, retry;
|
|
int dir_in;
|
|
int actlen, data_actlen;
|
|
unsigned int pipe, pipein, pipeout;
|
|
// DEBUG_STORAGE ( ); /* GALVEZ: DEBUG */
|
|
#ifdef BBB_XPORT_TRACE
|
|
unsigned char *ptr;
|
|
int idx;
|
|
#endif
|
|
umass_bbb_csw_t *csw = (umass_bbb_csw_t *)usb_malloc(sizeof(umass_bbb_csw_t));
|
|
if(csw == NULL)
|
|
{
|
|
DEBUG_STORAGE("out of memory\r\n");
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
dir_in = US_DIRECTION(srb->cmd[0]);
|
|
/* COMMAND phase */
|
|
DEBUG_STORAGE("COMMAND phase\n");
|
|
result = usb_stor_BBB_comdat(srb, us);
|
|
if(result < 0)
|
|
{
|
|
DEBUG_STORAGE("failed to send CBW status %ld\r\n", us->pusb_dev->status);
|
|
usb_stor_BBB_reset(us);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
wait_ms(5);
|
|
pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
|
|
pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
|
|
/* DATA phase + error handling */
|
|
data_actlen = 0;
|
|
/* no data, go immediately to the STATUS phase */
|
|
if(srb->datalen == 0)
|
|
goto st;
|
|
DEBUG_STORAGE("DATA phase\n");
|
|
if(dir_in)
|
|
pipe = pipein;
|
|
else
|
|
pipe = pipeout;
|
|
result = usb_bulk_msg(us->pusb_dev, pipe, srb->pdata, srb->datalen, &data_actlen, USB_CNTL_TIMEOUT * 5);
|
|
/* special handling of STALL in DATA phase */
|
|
if((result < 0) && (us->pusb_dev->status & USB_ST_STALLED))
|
|
{
|
|
DEBUG_STORAGE("DATA:stall\r\n");
|
|
/* clear the STALL on the endpoint */
|
|
result = usb_stor_BBB_clear_endpt_stall(us, dir_in ? us->ep_in : us->ep_out);
|
|
if(result >= 0)
|
|
/* continue on to STATUS phase */
|
|
goto st;
|
|
}
|
|
if(result < 0)
|
|
{
|
|
DEBUG_STORAGE("usb_bulk_msg error status %ld\r\n", us->pusb_dev->status);
|
|
usb_stor_BBB_reset(us);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
#ifdef BBB_XPORT_TRACE
|
|
debug_init("usb.log");
|
|
for(idx = 0; idx < data_actlen; idx++)
|
|
debug("pdata[%d] %#x ", idx, srb->pdata[idx]);
|
|
debug("\r\n");
|
|
debug_exit( );
|
|
#endif
|
|
/* STATUS phase + error handling */
|
|
st:
|
|
retry = 0;
|
|
again:
|
|
DEBUG_STORAGE("STATUS phase\n");
|
|
result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE, &actlen, USB_CNTL_TIMEOUT*5);
|
|
/* special handling of STALL in STATUS phase */
|
|
|
|
if((result < 0) && (retry < 1) && (us->pusb_dev->status & USB_ST_STALLED))
|
|
{
|
|
DEBUG_STORAGE("STATUS:stall\r\n");
|
|
/* clear the STALL on the endpoint */
|
|
result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
|
|
if(result >= 0 && (retry++ < 1))
|
|
/* do a retry */
|
|
goto again;
|
|
}
|
|
|
|
if(result < 0)
|
|
{
|
|
DEBUG_STORAGE("usb_bulk_msg error status %ld\r\n", us->pusb_dev->status);
|
|
usb_stor_BBB_reset(us);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
#ifdef BBB_XPORT_TRACE
|
|
debug_init("usb.log");
|
|
ptr = (unsigned char *)csw;
|
|
for(idx = 0; idx < UMASS_BBB_CSW_SIZE; idx++)
|
|
debug("ptr[%d] %#x ", idx, ptr[idx]);
|
|
debug("\r\n");
|
|
debug_exit( );
|
|
#endif
|
|
/* misuse pipe to get the residue */
|
|
pipe = le32_to_cpu(csw->dCSWDataResidue);
|
|
if(pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
|
|
pipe = srb->datalen - data_actlen;
|
|
if(CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature))
|
|
{
|
|
DEBUG_STORAGE("!CSWSIGNATURE\r\n");
|
|
usb_stor_BBB_reset(us);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
else if((CBWTag - 1) != le32_to_cpu(csw->dCSWTag))
|
|
{
|
|
DEBUG_STORAGE("!Tag\r\n");
|
|
usb_stor_BBB_reset(us);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
else if(csw->bCSWStatus > CSWSTATUS_PHASE)
|
|
{
|
|
DEBUG_STORAGE(">PHASE\r\n");
|
|
usb_stor_BBB_reset(us);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
else if(csw->bCSWStatus == CSWSTATUS_PHASE)
|
|
{
|
|
DEBUG_STORAGE("=PHASE\r\n");
|
|
usb_stor_BBB_reset(us);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
else if(data_actlen > srb->datalen)
|
|
{
|
|
DEBUG_STORAGE("transferred %dB instead of %ldB\r\n", data_actlen, srb->datalen);
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
else if(csw->bCSWStatus == CSWSTATUS_FAILED)
|
|
{
|
|
// printf("FAILED\r\n"); /* GALVEZ: DEBUG */
|
|
DEBUG_STORAGE("FAILED\r\n");
|
|
usb_free(csw);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
usb_free(csw);;
|
|
return result;
|
|
}
|
|
|
|
int usb_stor_CB_transport(ccb *srb, struct us_data *us)
|
|
{
|
|
int result, status;
|
|
ccb *psrb;
|
|
ccb reqsrb;
|
|
int retry, notready;
|
|
psrb = &reqsrb;
|
|
status = USB_STOR_TRANSPORT_GOOD;
|
|
retry = 0;
|
|
notready = 0;
|
|
/* issue the command */
|
|
do_retry:
|
|
result = usb_stor_CB_comdat(srb, us);
|
|
DEBUG_STORAGE("command / Data returned %d, status %lX\r\n", result, us->pusb_dev->status);
|
|
/* if this is an CBI Protocol, get IRQ */
|
|
if(us->protocol == US_PR_CBI)
|
|
{
|
|
status = usb_stor_CBI_get_status(srb, us);
|
|
/* if the status is error, report it */
|
|
if(status == USB_STOR_TRANSPORT_ERROR)
|
|
{
|
|
DEBUG_STORAGE(" USB CBI Command Error\r\n");
|
|
return status;
|
|
}
|
|
srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
|
|
srb->sense_buf[13] = (unsigned char)(us->ip_data & 0xff);
|
|
if(!us->ip_data)
|
|
{
|
|
/* if the status is good, report it */
|
|
if(status == USB_STOR_TRANSPORT_GOOD)
|
|
{
|
|
DEBUG_STORAGE(" USB CBI Command Good\r\n");
|
|
return status;
|
|
}
|
|
}
|
|
}
|
|
/* do we have to issue an auto request? */
|
|
/* HERE we have to check the result */
|
|
if((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED))
|
|
{
|
|
DEBUG_STORAGE("ERROR %lX\r\n", us->pusb_dev->status);
|
|
us->transport_reset(us);
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
if((us->protocol == US_PR_CBI) && ((srb->cmd[0] == SCSI_REQ_SENSE) || (srb->cmd[0] == SCSI_INQUIRY)))
|
|
{
|
|
/* do not issue an autorequest after request sense */
|
|
DEBUG_STORAGE("No auto request and good\r\n");
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
}
|
|
/* issue an request_sense */
|
|
memset(&psrb->cmd[0], 0, 12);
|
|
psrb->cmd[0] = SCSI_REQ_SENSE;
|
|
psrb->cmd[1] = srb->lun << 5;
|
|
psrb->cmd[4] = 18;
|
|
psrb->datalen = 18;
|
|
psrb->pdata = &srb->sense_buf[0];
|
|
psrb->cmdlen = 12;
|
|
/* issue the command */
|
|
result = usb_stor_CB_comdat(psrb, us);
|
|
DEBUG_STORAGE("auto request returned %d\r\n", result);
|
|
/* if this is an CBI Protocol, get IRQ */
|
|
if(us->protocol == US_PR_CBI)
|
|
status = usb_stor_CBI_get_status(psrb, us);
|
|
if((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED))
|
|
{
|
|
DEBUG_STORAGE(" AUTO REQUEST ERROR %ld\r\n", us->pusb_dev->status);
|
|
return USB_STOR_TRANSPORT_ERROR;
|
|
}
|
|
DEBUG_STORAGE("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\r\n", srb->sense_buf[0], srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]);
|
|
/* Check the auto request result */
|
|
if((srb->sense_buf[2] == 0) && (srb->sense_buf[12] == 0) && (srb->sense_buf[13] == 0))
|
|
{
|
|
/* ok, no sense */
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
}
|
|
/* Check the auto request result */
|
|
switch(srb->sense_buf[2])
|
|
{
|
|
case 0x01:
|
|
/* Recovered Error */
|
|
return USB_STOR_TRANSPORT_GOOD;
|
|
case 0x02: /* Not Ready */
|
|
if(notready++ > USB_TRANSPORT_NOT_READY_RETRY)
|
|
{
|
|
DEBUG_STORAGE("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X (NOT READY)\r\n", srb->cmd[0], srb->sense_buf[0], srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
else
|
|
{
|
|
wait_ms(100);
|
|
goto do_retry;
|
|
}
|
|
break;
|
|
default:
|
|
if(retry++ > USB_TRANSPORT_UNKNOWN_RETRY)
|
|
{
|
|
DEBUG_STORAGE("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X\r\n",
|
|
srb->cmd[0], srb->sense_buf[0], srb->sense_buf[2],
|
|
srb->sense_buf[12], srb->sense_buf[13]);
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
else
|
|
goto do_retry;
|
|
break;
|
|
}
|
|
return USB_STOR_TRANSPORT_FAILED;
|
|
}
|
|
|
|
static int usb_inquiry(ccb *srb, struct us_data *ss)
|
|
{
|
|
DEBUG_STORAGE ("usb_inquiry()"); /* GALVEZ: DEBUG */
|
|
|
|
int retry, i;
|
|
retry = 5;
|
|
do
|
|
{
|
|
memset(&srb->cmd[0], 0, 12);
|
|
srb->cmd[0] = SCSI_INQUIRY;
|
|
srb->cmd[4] = 36;
|
|
srb->datalen = 36;
|
|
srb->cmdlen = 12;
|
|
i = ss->transport(srb, ss);
|
|
DEBUG_STORAGE("inquiry returns %d\r\n", i);
|
|
if(i == 0)
|
|
break;
|
|
}
|
|
while(retry--);
|
|
if(!retry)
|
|
{
|
|
DEBUG_STORAGE("error in inquiry\r\n");
|
|
printf("error in inquiry\r\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int usb_request_sense(ccb *srb, struct us_data *ss)
|
|
{
|
|
DEBUG_STORAGE("usb_request_sense()"); /* GALVEZ: DEBUG */
|
|
char *ptr;
|
|
ptr = (char *)srb->pdata;
|
|
memset(&srb->cmd[0], 0, /*12*/6); /* GALVEZ: DEBUG: DEFAULT 12 */
|
|
srb->cmd[0] = SCSI_REQ_SENSE;
|
|
srb->cmd[4] = 18;
|
|
srb->datalen = 18;
|
|
srb->pdata = &srb->sense_buf[0];
|
|
srb->cmdlen = /*12*/6; /* GALVEZ: DEBUG: DEFAULT 12 */
|
|
ss->transport(srb, ss);
|
|
DEBUG_STORAGE("Request Sense returned %02X %02X %02X\r\n", srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]);
|
|
srb->pdata = (unsigned char *)ptr;
|
|
return 0;
|
|
}
|
|
|
|
static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
|
|
{
|
|
int retries = 10;
|
|
DEBUG_STORAGE("usb_test_unit_ready()"); /* GALVEZ: DEBUG */
|
|
do
|
|
{
|
|
memset(&srb->cmd[0], 0, /*12*/ 6); /* GALVEZ: DEBUG: DEFAULT 12 */
|
|
srb->cmd[0] = SCSI_TST_U_RDY;
|
|
srb->datalen = 0;
|
|
srb->cmdlen = /*12*/ 6; /* GALVEZ: DEBUG: DEFAULT 12 */
|
|
if(ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
|
|
return 0;
|
|
usb_request_sense(srb, ss);
|
|
wait_ms(100);
|
|
}
|
|
while(retries--);
|
|
return -1;
|
|
}
|
|
|
|
static int usb_read_capacity(ccb *srb, struct us_data *ss)
|
|
{
|
|
int retry;
|
|
/* XXX retries */
|
|
retry = 3;
|
|
DEBUG_STORAGE("usb_read_capacity()"); /* GALVEZ: DEBUG */
|
|
do
|
|
{
|
|
memset(&srb->cmd[0], 0, 12);
|
|
srb->cmd[0] = SCSI_RD_CAPAC;
|
|
srb->datalen = 8;
|
|
srb->cmdlen = 12;
|
|
if(ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
|
|
return 0;
|
|
}
|
|
while(retry--);
|
|
return -1;
|
|
}
|
|
|
|
static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start, unsigned short blocks)
|
|
{
|
|
memset(&srb->cmd[0], 0, 12);
|
|
srb->cmd[0] = SCSI_READ10;
|
|
srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
|
|
srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
|
|
srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
|
|
srb->cmd[5] = ((unsigned char) (start)) & 0xff;
|
|
srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
|
|
srb->cmd[8] = (unsigned char) blocks & 0xff;
|
|
srb->cmdlen = 12;
|
|
DEBUG_STORAGE("read10: start %lx blocks %x\r\n", start, blocks);
|
|
return ss->transport(srb, ss);
|
|
}
|
|
|
|
static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start, unsigned short blocks)
|
|
{
|
|
memset(&srb->cmd[0], 0, 12);
|
|
srb->cmd[0] = SCSI_WRITE10;
|
|
srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
|
|
srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
|
|
srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
|
|
srb->cmd[5] = ((unsigned char) (start)) & 0xff;
|
|
srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
|
|
srb->cmd[8] = (unsigned char) blocks & 0xff;
|
|
srb->cmdlen = 12;
|
|
DEBUG_STORAGE("write10: start %lx blocks %x\r\n", start, blocks);
|
|
return ss->transport(srb, ss);
|
|
}
|
|
|
|
#ifdef CONFIG_USB_BIN_FIXUP
|
|
/*
|
|
* Some USB storage devices queried for SCSI identification data respond with
|
|
* binary strings, which if output to the console freeze the terminal. The
|
|
* workaround is to modify the vendor and product strings read from such
|
|
* device with proper values (as reported by 'usb info').
|
|
*
|
|
* Vendor and product length limits are taken from the definition of
|
|
* block_dev_desc_t in include/part.h.
|
|
*/
|
|
static void usb_bin_fixup(struct usb_device_descriptor descriptor, unsigned char vendor[], unsigned char product[])
|
|
{
|
|
const unsigned char max_vendor_len = 40;
|
|
const unsigned char max_product_len = 20;
|
|
if(descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a)
|
|
{
|
|
strncpy((char *)vendor, "SMSC", max_vendor_len);
|
|
strncpy((char *)product, "Flash Media Cntrller", max_product_len);
|
|
}
|
|
}
|
|
#endif /* CONFIG_USB_BIN_FIXUP */
|
|
|
|
#define USB_MAX_READ_BLK 20
|
|
|
|
unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer)
|
|
{
|
|
unsigned long start, blks, buf_addr;
|
|
unsigned short smallblks;
|
|
struct usb_device *dev;
|
|
int retry, i;
|
|
ccb *srb = &usb_ccb;
|
|
|
|
|
|
if(blkcnt == 0)
|
|
return 0;
|
|
device &= 0xff;
|
|
/* Setup device */
|
|
// printf ("blknr: %x\n\r", blknr); /* Galvez: Debug */
|
|
DEBUG_STORAGE("usb_read: dev %d \r\n", device);
|
|
dev = NULL;
|
|
#ifdef SUPERVISOR
|
|
int p = 0;
|
|
/* GALVEZ: Acces to register in Supervisor */
|
|
if (!(Super(SUP_INQUIRE))){
|
|
p = SuperFromUser();
|
|
}
|
|
#endif
|
|
|
|
for(i = 0; i < USB_MAX_DEVICE; i++)
|
|
{
|
|
dev = usb_get_dev_index(i);
|
|
if(dev == NULL){
|
|
#ifdef SUPERVISOR
|
|
/* GALVEZ: come back to user mode */
|
|
if ((Super(SUP_INQUIRE)) && (p)){
|
|
SuperToUser(p);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
if(dev->devnum == usb_dev_desc[device].target)
|
|
break;
|
|
}
|
|
usb_disable_asynch(1); /* asynch transfer not allowed */
|
|
srb->lun = usb_dev_desc[device].lun;
|
|
buf_addr = (unsigned long)buffer;
|
|
start = blknr;
|
|
blks = blkcnt;
|
|
|
|
if(usb_test_unit_ready(srb, (struct us_data *)dev->privptr))
|
|
{
|
|
DEBUG_STORAGE("Device NOT ready\r\n Request Sense returned %02X %02X %02X\r\n", srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]);
|
|
printf("Device NOT ready\r\n Request Sense returned %02X %02X %02X\r\n", srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]);
|
|
#ifdef SUPERVISOR
|
|
/* GALVEZ: come back to user mode */
|
|
if ((Super(SUP_INQUIRE)) && (p)){
|
|
SuperToUser(p);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
DEBUG_STORAGE("usb_read: dev %d startblk %lx, blccnt %lx buffer %lx\r\n", device, start, blks, buf_addr);
|
|
do
|
|
{
|
|
/* XXX need some comment here */
|
|
retry = 2;
|
|
srb->pdata = (unsigned char *)buf_addr;
|
|
if(blks > USB_MAX_READ_BLK)
|
|
smallblks = USB_MAX_READ_BLK;
|
|
else
|
|
smallblks = (unsigned short) blks;
|
|
retry_it:
|
|
srb->datalen = usb_dev_desc[device].blksz * smallblks;
|
|
srb->pdata = (unsigned char *)buf_addr;
|
|
if(usb_read_10(srb, (struct us_data *)dev->privptr, start, smallblks))
|
|
{
|
|
DEBUG_STORAGE("Read ERROR\r\n");
|
|
usb_request_sense(srb, (struct us_data *)dev->privptr);
|
|
if(retry--)
|
|
goto retry_it;
|
|
blkcnt -= blks;
|
|
break;
|
|
}
|
|
start += smallblks;
|
|
blks -= smallblks;
|
|
buf_addr += srb->datalen;
|
|
}
|
|
while(blks != 0);
|
|
DEBUG_STORAGE("usb_read: end startblk %lx, blccnt %x buffer %lx\r\n", start, smallblks, buf_addr);
|
|
usb_disable_asynch(0); /* asynch transfer allowed */
|
|
#ifdef SUPERVISOR
|
|
/* GALVEZ: come back to user mode */
|
|
if ((Super(SUP_INQUIRE)) && (p)){
|
|
SuperToUser(p);
|
|
}
|
|
#endif
|
|
return blkcnt;
|
|
}
|
|
|
|
unsigned long usb_stor_write(int device, unsigned long blknr, unsigned long blkcnt, const void *buffer)
|
|
{
|
|
unsigned long start, blks, buf_addr;
|
|
unsigned short smallblks;
|
|
struct usb_device *dev;
|
|
int retry, i;
|
|
ccb *srb = &usb_ccb;
|
|
|
|
if(blkcnt == 0)
|
|
return 0;
|
|
device &= 0xff;
|
|
/* Setup device */
|
|
DEBUG_STORAGE("usb_write: dev %d \r\n", device);
|
|
#ifdef SUPERVISOR
|
|
int p = 0;
|
|
/* GALVEZ: Acces to register in Supervisor */
|
|
if ( !(Super(SUP_INQUIRE))){
|
|
p = SuperFromUser();
|
|
}
|
|
#endif
|
|
|
|
dev = NULL;
|
|
for(i = 0; i < USB_MAX_DEVICE; i++)
|
|
{
|
|
dev = usb_get_dev_index(i);
|
|
if(dev == NULL){
|
|
#ifdef SUPERVISOR
|
|
/* GALVEZ: come back to user mode */
|
|
if ((Super(SUP_INQUIRE)) && (p))
|
|
SuperToUser(p);
|
|
#endif
|
|
return 0;
|
|
}
|
|
if(dev->devnum == usb_dev_desc[device].target)
|
|
break;
|
|
}
|
|
usb_disable_asynch(1); /* asynch transfer not allowed */
|
|
srb->lun = usb_dev_desc[device].lun;
|
|
buf_addr = (unsigned long)buffer;
|
|
start = blknr;
|
|
blks = blkcnt;
|
|
//#if 1 /* GALVEZ: DEBUG */
|
|
if(usb_test_unit_ready(srb, (struct us_data *)dev->privptr))
|
|
{
|
|
DEBUG_STORAGE("Device NOT ready\r\n Request Sense returned %02X %02X %02X\r\n", srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]);
|
|
printf("Device NOT ready\r\n Request Sense returned %02X %02X %02X\r\n", srb->sense_buf[2], srb->sense_buf[12], srb->sense_buf[13]);
|
|
#ifdef SUPERVISOR
|
|
/* GALVEZ: come back to user mode */
|
|
if ((Super(SUP_INQUIRE)) && (p))
|
|
SuperToUser(p);
|
|
#endif
|
|
return 0;
|
|
}
|
|
//#endif
|
|
DEBUG_STORAGE("usb_write: dev %d startblk %lx, blccnt %lx buffer %lx\r\n", device, start, blks, buf_addr);
|
|
do
|
|
{
|
|
/* XXX need some comment here */
|
|
retry = 2;
|
|
srb->pdata = (unsigned char *)buf_addr;
|
|
if(blks > USB_MAX_READ_BLK)
|
|
smallblks = USB_MAX_READ_BLK;
|
|
else
|
|
smallblks = (unsigned short)blks;
|
|
retry_it:
|
|
srb->datalen = usb_dev_desc[device].blksz * smallblks;
|
|
srb->pdata = (unsigned char *)buf_addr;
|
|
if(usb_write_10(srb, (struct us_data *)dev->privptr, start, smallblks))
|
|
{
|
|
DEBUG_STORAGE("Write ERROR\r\n");
|
|
usb_request_sense(srb, (struct us_data *)dev->privptr);
|
|
if(retry--)
|
|
goto retry_it;
|
|
blkcnt -= blks;
|
|
break;
|
|
}
|
|
start += smallblks;
|
|
blks -= smallblks;
|
|
buf_addr += srb->datalen;
|
|
}
|
|
while(blks != 0);
|
|
DEBUG_STORAGE("usb_write: end startblk %lx, blccnt %x buffer %lx\r\n", start, smallblks, buf_addr);
|
|
usb_disable_asynch(0); /* asynch transfer allowed */
|
|
#ifdef SUPERVISOR
|
|
/* GALVEZ: come back to user mode */
|
|
if ((Super(SUP_INQUIRE)) && (p))
|
|
SuperToUser(p);
|
|
#endif
|
|
return blkcnt;
|
|
}
|
|
|
|
/* Probe to see if a new device is actually a Storage device */
|
|
int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, struct us_data *ss)
|
|
{
|
|
struct usb_interface_descriptor *iface;
|
|
int i;
|
|
unsigned int flags = 0;
|
|
int protocol = 0;
|
|
int subclass = 0;
|
|
|
|
DEBUG_STORAGE("usb_storage_probe()");
|
|
|
|
/* let's examine the device now */
|
|
iface = &dev->config.if_desc[ifnum];
|
|
#if 0
|
|
DEBUG_STORAGE("iVendor 0x%X iProduct 0x%X\r\n", dev->descriptor.idVendor, dev->descriptor.idProduct);
|
|
/* this is the place to patch some storage devices */
|
|
if((dev->descriptor.idVendor) == 0x066b && (dev->descriptor.idProduct) == 0x0103)
|
|
{
|
|
DEBUG_STORAGE("patched for E-USB\r\n");
|
|
protocol = US_PR_CB;
|
|
subclass = US_SC_UFI; /* an assumption */
|
|
}
|
|
#endif
|
|
if(dev->descriptor.bDeviceClass != 0 || iface->bInterfaceClass != USB_CLASS_MASS_STORAGE
|
|
|| iface->bInterfaceSubClass < US_SC_MIN || iface->bInterfaceSubClass > US_SC_MAX)
|
|
/* if it's not a mass storage, we go no further */
|
|
return 0;
|
|
memset(ss, 0, sizeof(struct us_data));
|
|
/* At this point, we know we've got a live one */
|
|
DEBUG_STORAGE("\r\n\r\nUSB Mass Storage device detected\r\n");
|
|
DEBUG_STORAGE("Protocol: %x SubClass: %x", iface->bInterfaceProtocol, /* GALVEZ: DEBUG */
|
|
iface->bInterfaceSubClass );
|
|
/* Initialize the us_data structure with some useful info */
|
|
ss->flags = flags;
|
|
ss->ifnum = ifnum;
|
|
ss->pusb_dev = dev;
|
|
ss->attention_done = 0;
|
|
/* If the device has subclass and protocol, then use that. Otherwise,
|
|
* take data from the specific interface.
|
|
*/
|
|
if(subclass)
|
|
{
|
|
ss->subclass = subclass;
|
|
ss->protocol = protocol;
|
|
}
|
|
else
|
|
{
|
|
ss->subclass = iface->bInterfaceSubClass;
|
|
ss->protocol = iface->bInterfaceProtocol;
|
|
}
|
|
/* set the handler pointers based on the protocol */
|
|
DEBUG_STORAGE("Transport: ");
|
|
switch(ss->protocol)
|
|
{
|
|
case US_PR_CB:
|
|
DEBUG_STORAGE("Control/Bulk\r\n");
|
|
ss->transport = usb_stor_CB_transport;
|
|
ss->transport_reset = usb_stor_CB_reset;
|
|
break;
|
|
case US_PR_CBI:
|
|
DEBUG_STORAGE("Control/Bulk/Interrupt\r\n");
|
|
ss->transport = usb_stor_CB_transport;
|
|
ss->transport_reset = usb_stor_CB_reset;
|
|
break;
|
|
case US_PR_BULK:
|
|
DEBUG_STORAGE("Bulk/Bulk/Bulk\r\n");
|
|
ss->transport = usb_stor_BBB_transport;
|
|
ss->transport_reset = usb_stor_BBB_reset;
|
|
break;
|
|
default:
|
|
printf("USB Storage Transport unknown / not yet implemented\r\n");
|
|
return 0;
|
|
break;
|
|
}
|
|
/*
|
|
* We are expecting a minimum of 2 endpoints - in and out (bulk).
|
|
* An optional interrupt is OK (necessary for CBI protocol).
|
|
* We will ignore any others.
|
|
*/
|
|
DEBUG_STORAGE("Number of endpoints: %d\r\n", iface->bNumEndpoints);
|
|
for(i = 0; i < iface->bNumEndpoints; i++)
|
|
{
|
|
/* is it an BULK endpoint? */
|
|
if((iface->ep_desc[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK)
|
|
{
|
|
if(iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
|
|
ss->ep_in = iface->ep_desc[i].bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
|
|
else
|
|
ss->ep_out = iface->ep_desc[i].bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
|
|
}
|
|
/* is it an interrupt endpoint? */
|
|
if((iface->ep_desc[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)
|
|
{
|
|
ss->ep_int = iface->ep_desc[i].bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
|
|
ss->irqinterval = iface->ep_desc[i].bInterval;
|
|
}
|
|
}
|
|
DEBUG_STORAGE("Endpoints In %d Out %d Int %d\r\n", ss->ep_in, ss->ep_out, ss->ep_int);
|
|
/* Do some basic sanity checks, and bail if we find a problem */
|
|
if(usb_set_interface(dev, iface->bInterfaceNumber, 0) || !ss->ep_in || !ss->ep_out
|
|
|| (ss->protocol == US_PR_CBI && ss->ep_int == 0))
|
|
{
|
|
DEBUG_STORAGE("Problems with device\r\n");
|
|
return 0;
|
|
}
|
|
/* set class specific stuff */
|
|
/* We only handle certain protocols. Currently, these are
|
|
* the only ones.
|
|
* The SFF8070 accepts the requests used in u-boot
|
|
*/
|
|
if(ss->subclass != US_SC_UFI && ss->subclass != US_SC_SCSI && ss->subclass != US_SC_8070)
|
|
{
|
|
DEBUG_STORAGE("Sorry, protocol %d not yet supported.\r\n", ss->subclass);
|
|
printf("Sorry, protocol %d not yet supported.\r\n", ss->subclass);
|
|
return 0;
|
|
}
|
|
if(ss->ep_int)
|
|
{
|
|
/* we had found an interrupt endpoint, prepare irq pipe
|
|
* set up the IRQ pipe and handler
|
|
*/
|
|
ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255;
|
|
ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int);
|
|
ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe);
|
|
dev->irq_handle = usb_stor_irq;
|
|
}
|
|
dev->privptr = (void *)ss;
|
|
return 1;
|
|
}
|
|
|
|
int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, block_dev_desc_t *dev_desc)
|
|
{
|
|
unsigned char perq, modi;
|
|
unsigned long cap[2];
|
|
unsigned long *capacity, *blksz;
|
|
ccb *pccb = &usb_ccb;
|
|
DEBUG_STORAGE("usb_stor_ger_info()");
|
|
/* for some reasons a couple of devices would not survive this reset */
|
|
if(
|
|
/* Sony USM256E */
|
|
(dev->descriptor.idVendor == 0x054c && dev->descriptor.idProduct == 0x019e)
|
|
/* USB007 Mini-USB2 Flash Drive */
|
|
|| (dev->descriptor.idVendor == 0x066f && dev->descriptor.idProduct == 0x2010)
|
|
/* SanDisk Corporation Cruzer Micro 20044318410546613953 */
|
|
|| (dev->descriptor.idVendor == 0x0781 && dev->descriptor.idProduct == 0x5151)
|
|
/* SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4 */
|
|
|| (dev->descriptor.idVendor == 0x0781 && dev->descriptor.idProduct == 0x5406)
|
|
)
|
|
{ DEBUG_STORAGE("usb_stor_get_info: skipping RESET..\r\n");}
|
|
else
|
|
ss->transport_reset(ss);
|
|
pccb->pdata = usb_stor_buf;
|
|
dev_desc->target = dev->devnum;
|
|
pccb->lun = dev_desc->lun;
|
|
DEBUG_STORAGE(" address %d\r\n", dev_desc->target);
|
|
if(usb_inquiry(pccb, ss))
|
|
return -1;
|
|
perq = usb_stor_buf[0];
|
|
modi = usb_stor_buf[1];
|
|
if((perq & 0x1f) == 0x1f)
|
|
/* skip unknown devices */
|
|
return 0;
|
|
if((modi&0x80) == 0x80)
|
|
/* drive is removable */
|
|
dev_desc->removable = 1;
|
|
memcpy(&dev_desc->vendor[0], &usb_stor_buf[8], 8);
|
|
memcpy(&dev_desc->product[0], &usb_stor_buf[16], 16);
|
|
memcpy(&dev_desc->revision[0], &usb_stor_buf[32], 4);
|
|
dev_desc->vendor[8] = 0;
|
|
dev_desc->product[16] = 0;
|
|
dev_desc->revision[4] = 0;
|
|
#ifdef CONFIG_USB_BIN_FIXUP
|
|
usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor, (uchar *)dev_desc->product);
|
|
#endif /* CONFIG_USB_BIN_FIXUP */
|
|
DEBUG_STORAGE("ISO Vers %X, Response Data %X\r\n", usb_stor_buf[2], usb_stor_buf[3]);
|
|
if(usb_test_unit_ready(pccb, ss))
|
|
{
|
|
DEBUG_STORAGE("Device NOT ready\r\n Request Sense returned %02X %02X %02X\r\n", pccb->sense_buf[2], pccb->sense_buf[12], pccb->sense_buf[13]);
|
|
printf("Device NOT ready\r\n Request Sense returned %02X %02X %02X\r\n", pccb->sense_buf[2], pccb->sense_buf[12], pccb->sense_buf[13]);
|
|
if(dev_desc->removable == 1)
|
|
{
|
|
dev_desc->type = perq;
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
pccb->pdata = (unsigned char *)&cap[0];
|
|
memset(pccb->pdata, 0, 8);
|
|
if(usb_read_capacity(pccb, ss) != 0)
|
|
{
|
|
printf("READ_CAP ERROR\r\n");
|
|
cap[0] = 2880;
|
|
cap[1] = 0x200;
|
|
}
|
|
DEBUG_STORAGE("Read Capacity returns: 0x%lx, 0x%lx\r\n", cap[0], cap[1]);
|
|
#if 0
|
|
if(cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
|
|
cap[0] >>= 16;
|
|
#endif
|
|
cap[0] = cpu_to_be32(cap[0]);
|
|
cap[1] = cpu_to_be32(cap[1]);
|
|
/* this assumes bigendian! */
|
|
cap[0] += 1;
|
|
capacity = &cap[0];
|
|
blksz = &cap[1];
|
|
DEBUG_STORAGE("Capacity = 0x%lx, blocksz = 0x%lx\r\n", *capacity, *blksz);
|
|
dev_desc->lba = *capacity;
|
|
dev_desc->blksz = *blksz;
|
|
dev_desc->type = perq;
|
|
DEBUG_STORAGE(" address %d\r\n", dev_desc->target);
|
|
DEBUG_STORAGE("partype: %d\r\n", dev_desc->part_type);
|
|
init_part(dev_desc);
|
|
DEBUG_STORAGE("partype: %d\r\n", dev_desc->part_type);
|
|
return 1;
|
|
}
|
|
|
|
#endif /* CONFIG_USB_STORAGE */
|
|
#endif /* CONFIG_USB_UHCI || CONFIG_USB_OHCI || CONFIG_USB_EHCI */
|