Files
FireBee_SVN/BaS_gcc/bas.lk.in
2014-02-02 21:35:46 +00:00

255 lines
6.1 KiB
Plaintext

#if defined(MACHINE_FIREBEE)
#include "firebee.h"
#elif defined(MACHINE_M5484LITE)
#include "m5484l.h"
#elif defined(MACHINE_M54455)
#include "m54455.h"
#else
#error "unknown machine!"
#endif /* MACHINE_M5484LITE */
/* make bas_rom access flags rx if compiling to RAM */
#ifdef COMPILE_RAM
#define ROMFLAGS WX
#else
#define ROMFLAGS RX
#endif /* COMPILE_RAM */
MEMORY
{
bas_rom (ROMFLAGS) : ORIGIN = TARGET_ADDRESS, LENGTH = 0x00100000
/*
* target to copy BaS data segment to. 1M should be enough for now
*/
bas_ram (WX) : ORIGIN = SDRAM_START + SDRAM_SIZE - 0x00200000, LENGTH = 0x00100000
/*
* driver_ram is an uncached, reserved memory area for drivers (e.g. USB) that need this type of memory
*/
driver_ram (WX) : ORIGIN = SDRAM_START + SDRAM_SIZE - 0x00100000, LENGTH = 0x00100000
}
SECTIONS
{
/* BaS in ROM */
.text :
{
OBJDIR/startcf.o(.text) /* this one is the entry point so it must be the first */
OBJDIR/sysinit.o(.text)
OBJDIR/fault_vectors.o(.text)
#ifdef MACHINE_FIREBEE
OBJDIR/init_fpga.o(.text)
#endif /* MACHINE_FIREBEE */
OBJDIR/wait.o(.text)
OBJDIR/exceptions.o(.text)
OBJDIR/driver_vec.o(.text)
OBJDIR/interrupts.o(.text)
OBJDIR/mmu.o(.text)
OBJDIR/BaS.o(.text)
OBJDIR/pci.o(.text)
OBJDIR/usb.o(.text)
OBJDIR/driver_mem.o(.text)
OBJDIR/usb_mouse.o(.text)
OBJDIR/ohci-hcd.o(.text)
OBJDIR/ehci-hcd.o(.text)
OBJDIR/wait.o(.text)
OBJDIR/nbuf.o(.text)
OBJDIR/net_timer.o(.text)
OBJDIR/queue.o(.text)
OBJDIR/nif.o(.text)
OBJDIR/fecbd.o(.text)
OBJDIR/fec.o(.text)
OBJDIR/am79c874.o(.text)
OBJDIR/bcm5222.o(.text)
OBJDIR/ip.o(.text)
OBJDIR/udp.o(text)
OBJDIR/bootp.o(text)
OBJDIR/tftp.o(text)
OBJDIR/arp.o(text)
OBJDIR/unicode.o(.text)
OBJDIR/mmc.o(.text)
OBJDIR/ff.o(.text)
OBJDIR/sd_card.o(.text)
OBJDIR/s19reader.o(.text)
OBJDIR/bas_printf.o(.text)
OBJDIR/bas_string.o(.text)
OBJDIR/printf_helper.o(.text)
OBJDIR/cache.o(.text)
OBJDIR/dma.o(.text)
OBJDIR/MCD_dmaApi.o(.text)
OBJDIR/MCD_tasks.o(.text)
OBJDIR/MCD_tasksInit.o(.text)
OBJDIR/video.o(.text)
OBJDIR/videl.o(.text)
OBJDIR/fbmem.o(.text)
OBJDIR/fbmon.o(.text)
OBJDIR/fbmodedb.o(.text)
OBJDIR/offscreen.o(.text)
OBJDIR/x86decode.o(.text)
OBJDIR/x86ops.o(.text)
OBJDIR/x86ops2.o(.text)
OBJDIR/x86fpu.o(.text)
OBJDIR/x86sys.o(.text)
OBJDIR/x86biosemu.o(.text)
OBJDIR/x86debug.o(.text)
OBJDIR/x86prim_ops.o(.text)
OBJDIR/x86pcibios.o(.text)
OBJDIR/radeon_base.o(.text)
OBJDIR/radeon_accel.o(.text)
OBJDIR/radeon_cursor.o(.text)
OBJDIR/radeon_monitor.o(.text)
OBJDIR/xhdi_sd.o(.text)
OBJDIR/xhdi_interface.o(.text)
OBJDIR/xhdi_vec.o(.text)
#ifdef COMPILE_RAM
/*
* if we compile to RAM anyway, there is no need to copy anything
*/
. = ALIGN(4);
__BAS_DATA_START = .;
*(.data)
__BAS_DATA_END = .;
__BAS_BSS_START = .;
*(.bss)
__BAS_BSS_END = .;
#endif /* COMPILE_RAM */
#if (FORMAT_ELF == 1)
*(.rodata)
*(.rodata.*)
#endif
} > bas_rom
#if (TARGET_ADDRESS == BOOTFLASH_BASE_ADDRESS)
/*
* put BaS .data and .bss segments to flash, but relocate it to RAM after initialize_hardware() ran
*/
.bas :
AT (ALIGN(ADDR(.text) + SIZEOF(.text), 4))
{
. = ALIGN(4); /* same alignment than AT() statement! */
__BAS_DATA_START = .;
*(.data)
__BAS_DATA_END = .;
__BAS_BSS_START = .;
*(.bss)
__BAS_BSS_END = .;
. = ALIGN(16);
} > bas_ram
#endif
.driver_memory :
{
. = ALIGN(4);
_driver_mem_buffer = .;
//. = . + DRIVER_MEM_BUFFER_SIZE;
} > driver_ram
/*
* Global memory map
*/
/* SDRAM Initialization */
___SDRAM = SDRAM_START;
___SDRAM_SIZE = SDRAM_SIZE;
_SDRAM_VECTOR_TABLE = ___SDRAM;
/* ST-RAM */
__STRAM = ___SDRAM;
__STRAM_END = __TOS;
/* TOS */
__TOS = 0x00e00000;
/* FastRAM */
__FASTRAM = 0x10000000;
__TARGET_ADDRESS = TARGET_ADDRESS;
#if TARGET_ADDRESS == BOOTFLASH_BASE_ADDRESS
__FASTRAM_END = __BAS_IN_RAM;
#else
__FASTRAM_END = TARGET_ADDRESS;
#endif
__FASTRAM_SIZE = __FASTRAM_END - __FASTRAM;
/* Init CS0 (BootFLASH @ E000_0000 - E07F_FFFF 8Mbytes) */
___BOOT_FLASH = BOOTFLASH_BASE_ADDRESS;
___BOOT_FLASH_SIZE = BOOTFLASH_SIZE;
#if TARGET_ADDRESS == BOOTFLASH_BASE_ADDRESS
/* BaS */
__BAS_LMA = LOADADDR(.bas);
__BAS_IN_RAM = ADDR(.bas);
__BAS_SIZE = SIZEOF(.bas);
#else
/* BaS is already in RAM - no need to copy anything */
__BAS_IN_RAM = __FASTRAM_END;
__BAS_SIZE = 0;
__BAS_LMA = __BAS_IN_RAM;
#endif
/* Other flash components */
__FIRETOS = 0xe0400000;
__EMUTOS = EMUTOS_BASE_ADDRESS;
__EMUTOS_SIZE = 0x00100000;
/* where FPGA data lives in flash */
__FPGA_FLASH_DATA = 0xe0700000;
__FPGA_FLASH_DATA_SIZE = 0x100000;
/* VIDEO RAM BASIS */
__VRAM = 0x60000000;
/* Memory mapped registers */
__MBAR = 0xFF000000;
/* 32KB on-chip System SRAM */
__SYS_SRAM = __MBAR + 0x10000;
__SYS_SRAM_SIZE = 0x00008000;
/* MMU memory mapped registers */
__MMUBAR = 0xFF040000;
/*
* 4KB on-chip Core SRAM0: -> exception table
*/
__RAMBAR0 = 0xFF100000;
__RAMBAR0_SIZE = 0x00001000;
/* 4KB on-chip Core SRAM1 */
__RAMBAR1 = 0xFF101000;
__RAMBAR1_SIZE = 0x00001000;
__SUP_SP = __RAMBAR0 + __RAMBAR0_SIZE - 4;
/* system variables */
/* RAMBAR0 0 to 0x7FF -> exception vectors */
_rt_mod = __RAMBAR0 + 0x800;
_rt_ssp = __RAMBAR0 + 0x804;
_rt_usp = __RAMBAR0 + 0x808;
_rt_vbr = __RAMBAR0 + 0x80C; /* (8)01 */
_rt_cacr = __RAMBAR0 + 0x810; /* 002 */
_rt_asid = __RAMBAR0 + 0x814; /* 003 */
_rt_acr0 = __RAMBAR0 + 0x818; /* 004 */
_rt_acr1 = __RAMBAR0 + 0x81c; /* 005 */
_rt_acr2 = __RAMBAR0 + 0x820; /* 006 */
_rt_acr3 = __RAMBAR0 + 0x824; /* 007 */
_rt_mmubar = __RAMBAR0 + 0x828; /* 008 */
_rt_sr = __RAMBAR0 + 0x82c;
_d0_save = __RAMBAR0 + 0x830;
_a7_save = __RAMBAR0 + 0x834;
_video_tlb = __RAMBAR0 + 0x838;
_video_sbt = __RAMBAR0 + 0x83C;
_rt_mbar = __RAMBAR0 + 0x844; /* (c)0f */
}