Firebee/FireBee_SVN
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
8e6e28f5c003a14f69287f7b4a60e5193b326959
FireBee_SVN/net/fec.c
David Gálvez 2b8162a1e1 Merge pci_BaS_gcc branch from trunk (new attempt)
2014-07-10 15:36:48 +00:00

1448 lines
30 KiB
C
Raw Blame History

/*
* File: fec.c
* Purpose: Driver for the Fast Ethernet Controller (FEC)
*
* Notes:
*/
#include "net.h"
#include "fec.h"
#include "fecbd.h"
#include "exceptions.h"
#include "interrupts.h"
#include "MCF5475.h"
#include "MCD_dma.h"
#include "mcd_initiators.h"
#include "dma.h"
#include "bas_string.h"
#include "bas_printf.h"
#include "util.h"
#include "wait.h"
#include "am79c874.h"
//#include "bcm5222.h"
#include <stdbool.h>
#if defined(MACHINE_FIREBEE)
#include "firebee.h"
#elif defined(MACHINE_M5484LITE)
#include "m5484l.h"
#elif defined(MACHINE_M54455)
#include "m54455.h"
#else
#error Unknown machine!
#endif
// #define DBG_FEC
#ifdef DBG_FEC
#define dbg(format, arg...) do { xprintf("DEBUG: %s(): " format, __FUNCTION__, ##arg); } while (0)
#else
#define dbg(format, arg...) do { ; } while (0)
#endif /* DBG_FEC */
FEC_EVENT_LOG fec_log[2];
/*
* Write a value to a PHY's MII register.
*
* Parameters:
* ch FEC channel
* phy_addr Address of the PHY.
* reg_addr Address of the register in the PHY.
* data Data to be written to the PHY register.
*
* Return Values:
* 1 on failure
* 0 on success.
*
* Please refer to your PHY manual for registers and their meanings.
* mii_write() polls for the FEC's MII interrupt event (which should
* be masked from the interrupt handler) and clears it. If after a
* suitable amount of time the event isn't triggered, a value of 0
* is returned.
*/
int fec_mii_write(uint8_t ch, uint8_t phy_addr, uint8_t reg_addr, uint16_t data)
{
int timeout;
uint32_t eimr;
/*
* Clear the MII interrupt bit
*/
MCF_FEC_EIR(ch) = MCF_FEC_EIR_MII;
/*
* Write to the MII Management Frame Register to kick-off
* the MII write
*/
MCF_FEC_MMFR(ch) = 0
| MCF_FEC_MMFR_ST_01
| MCF_FEC_MMFR_OP_WRITE
| MCF_FEC_MMFR_PA(phy_addr)
| MCF_FEC_MMFR_RA(reg_addr)
| MCF_FEC_MMFR_TA_10
| MCF_FEC_MMFR_DATA(data);
/*
* Mask the MII interrupt
*/
eimr = MCF_FEC_EIMR(ch);
MCF_FEC_EIMR(ch) &= ~MCF_FEC_EIMR_MII;
/*
* Poll for the MII interrupt (interrupt should be masked)
*/
for (timeout = 0; timeout < FEC_MII_TIMEOUT; timeout++)
{
wait(1);
if (MCF_FEC_EIR(ch) & MCF_FEC_EIR_MII)
break;
}
if (timeout == FEC_MII_TIMEOUT)
return 0;
/*
* Clear the MII interrupt bit
*/
MCF_FEC_EIR(ch) = MCF_FEC_EIR_MII;
/*
* Restore the EIMR
*/
MCF_FEC_EIMR(ch) = eimr;
return 1;
}
/*
* Read a value from a PHY's MII register.
*
* Parameters:
* ch FEC channel
* phy_addr Address of the PHY.
* reg_addr Address of the register in the PHY.
* data Pointer to storage for the Data to be read
* from the PHY register (passed by reference)
*
* Return Values:
* 1 on failure
* 0 on success.
*
* Please refer to your PHY manual for registers and their meanings.
* mii_read() polls for the FEC's MII interrupt event (which should
* be masked from the interrupt handler) and clears it. If after a
* suitable amount of time the event isn't triggered, a value of 0
* is returned.
*/
int fec_mii_read(uint8_t ch, uint8_t phy_addr, uint8_t reg_addr, uint16_t *data)
{
int timeout;
/*
* Clear the MII interrupt bit
*/
MCF_FEC_EIR(ch) = MCF_FEC_EIR_MII;
/*
* Write to the MII Management Frame Register to kick-off
* the MII read
*/
MCF_FEC_MMFR(ch) = 0
| MCF_FEC_MMFR_ST_01
| MCF_FEC_MMFR_OP_READ
| MCF_FEC_MMFR_PA(phy_addr)
| MCF_FEC_MMFR_RA(reg_addr)
| MCF_FEC_MMFR_TA_10;
/*
* Poll for the MII interrupt (interrupt should be masked)
*/
for (timeout = 0; timeout < FEC_MII_TIMEOUT; timeout++)
{
wait(1);
if (MCF_FEC_EIR(ch) & MCF_FEC_EIR_MII)
break;
}
if (timeout == FEC_MII_TIMEOUT)
return 0;
/*
* Clear the MII interrupt bit
*/
MCF_FEC_EIR(ch) = MCF_FEC_EIR_MII;
*data = (uint16_t)(MCF_FEC_MMFR(ch) & 0x0000FFFF);
return 1;
}
/*
* Initialize the MII interface controller
*
* Parameters:
* ch FEC channel
* sys_clk System Clock Frequency (in MHz)
*/
void fec_mii_init(uint8_t ch, uint32_t sys_clk)
{
/*
* Initialize the MII clock (EMDC) frequency
*
* Desired MII clock is 2.5MHz
* MII Speed Setting = System_Clock / (2.5MHz * 2)
* (plus 1 to make sure we round up)
*/
MCF_FEC_MSCR(ch) = MCF_FEC_MSCR_MII_SPEED((sys_clk / 5) + 1);
}
/* Initialize the MIB counters
*
* Parameters:
* ch FEC channel
*/
void fec_mib_init(uint8_t ch)
{
//To do
}
/*
* Display the MIB counters
*
* Parameters:
* ch FEC channel
*/
void fec_mib_dump(uint8_t ch)
{
//To do
}
/*
* Initialize the FEC log
*
* Parameters:
* ch FEC channel
*/
void fec_log_init(uint8_t ch)
{
memset(&fec_log[ch], 0, sizeof(FEC_EVENT_LOG));
}
/*
* Display the FEC log
*
* Parameters:
* ch FEC channel
*/
void fec_log_dump(uint8_t ch)
{
dbg("\r\n FEC%d Log\r\n", __FUNCTION__, ch);
dbg(" ---------------\r\n", __FUNCTION__);
dbg(" Total: %4d\r\n", fec_log[ch].total);
dbg(" hberr: %4d\r\n", fec_log[ch].hberr);
dbg(" babr: %4d\r\n", fec_log[ch].babr);
dbg(" babt: %4d\r\n", fec_log[ch].babt);
dbg(" gra: %4d\r\n", fec_log[ch].gra);
dbg(" txf: %4d\r\n", fec_log[ch].txf);
dbg(" mii: %4d\r\n", fec_log[ch].mii);
dbg(" lc: %4d\r\n", fec_log[ch].lc);
dbg(" rl: %4d\r\n", fec_log[ch].rl);
dbg(" xfun: %4d\r\n", fec_log[ch].xfun);
dbg(" xferr: %4d\r\n", fec_log[ch].xferr);
dbg(" rferr: %4d\r\n", fec_log[ch].rferr);
dbg(" dtxf: %4d\r\n", fec_log[ch].dtxf);
dbg(" drxf: %4d\r\n", fec_log[ch].drxf);
dbg(" \r\nRFSW:\r\n");
dbg(" inv: %4d\r\n", fec_log[ch].rfsw_inv);
dbg(" m: %4d\r\n", fec_log[ch].rfsw_m);
dbg(" bc: %4d\r\n", fec_log[ch].rfsw_bc);
dbg(" mc: %4d\r\n", fec_log[ch].rfsw_mc);
dbg(" lg: %4d\r\n", fec_log[ch].rfsw_lg);
dbg(" no: %4d\r\n", fec_log[ch].rfsw_no);
dbg(" cr: %4d\r\n", fec_log[ch].rfsw_cr);
dbg(" ov: %4d\r\n", fec_log[ch].rfsw_ov);
dbg(" tr: %4d\r\n", fec_log[ch].rfsw_tr);
dbg(" ---------------\r\n\r\n");
}
/*
* Display some of the registers for debugging
*
* Parameters:
* ch FEC channel
*/
void fec_debug_dump(uint8_t ch)
{
dbg("\r\n------------- FEC%d -------------\r\n",ch);
dbg("EIR %08x \r\n", MCF_FEC_EIR(ch));
dbg("EIMR %08x \r\n", MCF_FEC_EIMR(ch));
dbg("ECR %08x \r\n", MCF_FEC_ECR(ch));
dbg("RCR %08x \r\n", MCF_FEC_RCR(ch));
dbg("R_HASH %08x \r\n", MCF_FEC_RHR_HASH(ch));
dbg("TCR %08x \r\n", MCF_FEC_TCR(ch));
dbg("FECTFWR %08x \r\n", MCF_FEC_FECTFWR(ch));
dbg("FECRFSR %08x \r\n", MCF_FEC_FECRFSR(ch));
dbg("FECRFCR %08x \r\n", MCF_FEC_FECRFCR(ch));
dbg("FECRLRFP %08x \r\n", MCF_FEC_FECRLRFP(ch));
dbg("FECRLWFP %08x \r\n", MCF_FEC_FECRLWFP(ch));
dbg("FECRFAR %08x \r\n", MCF_FEC_FECRFAR(ch));
dbg("FECRFRP %08x \r\n", MCF_FEC_FECRFRP(ch));
dbg("FECRFWP %08x \r\n", MCF_FEC_FECRFWP(ch));
dbg("FECTFSR %08x \r\n", MCF_FEC_FECTFSR(ch));
dbg("FECTFCR %08x \r\n", MCF_FEC_FECTFCR(ch));
dbg("FECTLRFP %08x \r\n", MCF_FEC_FECTLRFP(ch));
dbg("FECTLWFP %08x \r\n", MCF_FEC_FECTLWFP(ch));
dbg("FECTFAR %08x \r\n", MCF_FEC_FECTFAR(ch));
dbg("FECTFRP %08x \r\n", MCF_FEC_FECTFRP(ch));
dbg("FECTFWP %08x \r\n", MCF_FEC_FECTFWP(ch));
dbg("FRST %08x \r\n", MCF_FEC_FECFRST(ch));
dbg("--------------------------------\r\n\r\n");
}
/*
* Set the duplex on the selected FEC controller
*
* Parameters:
* ch FEC channel
* duplex FEC_MII_FULL_DUPLEX or FEC_MII_HALF_DUPLEX
*/
void fec_duplex(uint8_t ch, uint8_t duplex)
{
switch (duplex)
{
case FEC_MII_HALF_DUPLEX:
MCF_FEC_RCR(ch) |= MCF_FEC_RCR_DRT;
MCF_FEC_TCR(ch) &= (uint32_t) ~MCF_FEC_TCR_FDEN;
break;
case FEC_MII_FULL_DUPLEX:
default:
MCF_FEC_RCR(ch) &= (uint32_t) ~MCF_FEC_RCR_DRT;
MCF_FEC_TCR(ch) |= MCF_FEC_TCR_FDEN;
break;
}
}
/*
* Generate the hash table settings for the given address
*
* Parameters:
* addr 48-bit (6 byte) Address to generate the hash for
*
* Return Value:
* The 6 most significant bits of the 32-bit CRC result
*/
uint8_t fec_hash_address(const uint8_t *addr)
{
uint32_t crc;
uint8_t byte;
int i, j;
crc = 0xFFFFFFFF;
for (i = 0; i < 6; ++i)
{
byte = addr[i];
for (j = 0; j < 8; ++j)
{
if ((byte & 0x01) ^ (crc & 0x01))
{
crc >>= 1;
crc = crc ^ 0xEDB88320;
}
else
crc >>= 1;
byte >>= 1;
}
}
return (uint8_t)(crc >> 26);
}
/*
* Set the Physical (Hardware) Address and the Individual Address
* Hash in the selected FEC
*
* Parameters:
* ch FEC channel
* pa Physical (Hardware) Address for the selected FEC
*/
void fec_set_address(uint8_t ch, const uint8_t *pa)
{
uint8_t crc;
/*
* Set the Physical Address
*/
MCF_FEC_PALR(ch) = (uint32_t) ((pa[0] << 24) | (pa[1] << 16) | (pa[2] << 8) | pa[3]);
MCF_FEC_PAHR(ch) = (uint32_t) ((pa[4] << 24) | (pa[5] << 16));
/*
* Calculate and set the hash for given Physical Address
* in the Individual Address Hash registers
*/
crc = fec_hash_address(pa);
if(crc >= 32)
MCF_FEC_IAUR(ch) |= (uint32_t) (1 << (crc - 32));
else
MCF_FEC_IALR(ch) |= (uint32_t) (1 << crc);
}
/*
* Reset the selected FEC controller
*
* Parameters:
* ch FEC channel
*/
void fec_reset(uint8_t ch)
{
int i;
/* Clear any events in the FIFO status registers */
MCF_FEC_FECRFSR(ch) = (0
| MCF_FEC_FECRFSR_OF
| MCF_FEC_FECRFSR_UF
| MCF_FEC_FECRFSR_RXW
| MCF_FEC_FECRFSR_FAE
| MCF_FEC_FECRFSR_IP);
MCF_FEC_FECTFSR(ch) = (0
| MCF_FEC_FECTFSR_OF
| MCF_FEC_FECTFSR_UF
| MCF_FEC_FECTFSR_TXW
| MCF_FEC_FECTFSR_FAE
| MCF_FEC_FECTFSR_IP);
/* Reset the FIFOs */
MCF_FEC_FECFRST(ch) |= MCF_FEC_FECFRST_SW_RST;
MCF_FEC_FECFRST(ch) &= ~MCF_FEC_FECFRST_SW_RST;
/* Set the Reset bit and clear the Enable bit */
MCF_FEC_ECR(ch) = MCF_FEC_ECR_RESET;
/* Wait at least 8 clock cycles */
for (i = 0; i < 10; ++i)
NOP();
}
/*
* Initialize the selected FEC
*
* Parameters:
* ch FEC channel
* mode External interface mode (MII, 7-wire, or internal loopback)
* pa Physical (Hardware) Address for the selected FEC
*/
void fec_init(uint8_t ch, uint8_t mode, const uint8_t *pa)
{
/*
* Enable all the external interface signals
*/
if (mode == FEC_MODE_7WIRE)
{
if (ch == 1)
MCF_PAD_PAR_FECI2CIRQ |= MCF_PAD_PAR_FECI2CIRQ_PAR_E17;
else
MCF_PAD_PAR_FECI2CIRQ |= MCF_PAD_PAR_FECI2CIRQ_PAR_E07;
}
else if (mode == FEC_MODE_MII)
{
if (ch == 1)
MCF_PAD_PAR_FECI2CIRQ |= 0
| MCF_PAD_PAR_FECI2CIRQ_PAR_E1MDC_E1MDC
| MCF_PAD_PAR_FECI2CIRQ_PAR_E1MDIO_E1MDIO
| MCF_PAD_PAR_FECI2CIRQ_PAR_E1MII
| MCF_PAD_PAR_FECI2CIRQ_PAR_E17;
else
MCF_PAD_PAR_FECI2CIRQ |= 0
| MCF_PAD_PAR_FECI2CIRQ_PAR_E0MDC
| MCF_PAD_PAR_FECI2CIRQ_PAR_E0MDIO
| MCF_PAD_PAR_FECI2CIRQ_PAR_E0MII
| MCF_PAD_PAR_FECI2CIRQ_PAR_E07;
}
/*
* Clear the Individual and Group Address Hash registers
*/
MCF_FEC_IALR(ch) = 0;
MCF_FEC_IAUR(ch) = 0;
MCF_FEC_GALR(ch) = 0;
MCF_FEC_GAUR(ch) = 0;
/*
* Set the Physical Address for the selected FEC
*/
fec_set_address(ch, pa);
/*
* Mask all FEC interrupts
*/
MCF_FEC_EIMR(ch) = MCF_FEC_EIMR_MASK_ALL;
/*
* Clear all FEC interrupt events
*/
MCF_FEC_EIR(ch) = MCF_FEC_EIR_CLEAR_ALL;
/*
* Initialize the Receive Control Register
*/
MCF_FEC_RCR(ch) = 0
| MCF_FEC_RCR_MAX_FL(ETH_MAX_FRM)
| MCF_FEC_RCR_PROM
| MCF_FEC_RCR_FCE;
if (mode == FEC_MODE_MII)
MCF_FEC_RCR(ch) |= MCF_FEC_RCR_MII_MODE;
else if (mode == FEC_MODE_LOOPBACK)
MCF_FEC_RCR(ch) |= MCF_FEC_RCR_LOOP;
/*
* Initialize the Transmit Control Register
*/
MCF_FEC_TCR(ch) = MCF_FEC_TCR_FDEN;
/*
* Set Rx FIFO alarm and granularity
*/
MCF_FEC_FECRFCR(ch) = 0
| MCF_FEC_FECRFCR_FRMEN
| MCF_FEC_FECRFCR_RXW_MSK
| MCF_FEC_FECRFCR_GR(7);
MCF_FEC_FECRFAR(ch) = MCF_FEC_FECRFAR_ALARM(768);
/*
* Set Tx FIFO watermark, alarm and granularity
*/
MCF_FEC_FECTFCR(ch) = 0
| MCF_FEC_FECTFCR_FRMEN
| MCF_FEC_FECTFCR_TXW_MASK
| MCF_FEC_FECTFCR_GR(7);
MCF_FEC_FECTFAR(ch) = MCF_FEC_FECTFAR_ALARM(256);
MCF_FEC_FECTFWR(ch) = MCF_FEC_FECTFWR_X_WMRK_256;
/*
* Enable the transmitter to append the CRC
*/
MCF_FEC_FECCTCWR(ch) = 0
| MCF_FEC_FECCTCWR_TFCW
| MCF_FEC_FECCTCWR_CRC;
}
/*
* Start the FEC Rx DMA task
*
* Parameters:
* ch FEC channel
* rxbd First Rx buffer descriptor in the chain
*/
void fec_rx_start(uint8_t ch, int8_t *rxbd)
{
uint32_t initiator;
int channel;
#ifdef DBG_FEC
int res;
#endif
/*
* Make the initiator assignment
*/
#if defined(DBG_FEC)
res =
#else
(void)
#endif
dma_set_initiator(DMA_FEC_RX(ch));
dbg("dma_set_initiator(DMA_FEC_RX(%d)): %d\r\n", ch, res);
/*
* Grab the initiator number
*/
initiator = dma_get_initiator(DMA_FEC_RX(ch));
dbg("dma_get_initiator(DMA_FEC_RX(%d)) = %d\r\n", ch, initiator);
/*
* Determine the DMA channel running the task for the
* selected FEC
*/
channel = dma_set_channel(DMA_FEC_RX(ch),
(ch == 0) ? fec0_rx_frame : fec1_rx_frame);
dbg("DMA channel for FEC%1d: %d\r\n", ch, channel);
/*
* Start the Rx DMA task
*/
MCD_startDma(channel,
(int8_t *) rxbd,
0,
(int8_t *) MCF_FEC_FECRFDR(ch),
0,
RX_BUF_SZ,
0,
initiator,
FECRX_DMA_PRI(ch),
0
| MCD_FECRX_DMA
| MCD_INTERRUPT
| MCD_TT_FLAGS_CW
| MCD_TT_FLAGS_RL
| MCD_TT_FLAGS_SP
,
0
| MCD_NO_CSUM
| MCD_NO_BYTE_SWAP
);
dbg("Rx DMA task for FEC%1d started\r\n", ch);
}
/*
* Continue the Rx DMA task
*
* This routine is called after the DMA task has halted after
* encountering an Rx buffer descriptor that wasn't marked as
* ready. There is no harm in calling the DMA continue routine
* if the DMA is not halted.
*
* Parameters:
* ch FEC channel
*/
void fec_rx_continue(uint8_t ch)
{
int channel;
/*
* Determine the DMA channel running the task for the
* selected FEC
*/
channel = dma_get_channel(DMA_FEC_RX(ch));
dbg("RX DMA channel for FEC%1d is %d\r\n", ch, channel);
/*
* Continue/restart the DMA task
*/
MCD_continDma(channel);
dbg("RX dma on channel %d continued\r\n", channel);
}
/*
* Stop all frame receptions on the selected FEC
*
* Parameters:
* ch FEC channel
*/
void fec_rx_stop (uint8_t ch)
{
uint32_t mask;
int channel;
/* Save off the EIMR value */
mask = MCF_FEC_EIMR(ch);
/* Mask all interrupts */
MCF_FEC_EIMR(ch) = 0;
/*
* Determine the DMA channel running the task for the
* selected FEC
*/
channel = dma_get_channel(DMA_FEC_RX(ch));
/* Kill the FEC Rx DMA task */
MCD_killDma(channel);
/*
* Free up the FEC requestor from the software maintained
* initiator list
*/
dma_free_initiator(DMA_FEC_RX(ch));
/* Free up the DMA channel */
dma_free_channel(DMA_FEC_RX(ch));
/* Restore the interrupt mask register value */
MCF_FEC_EIMR(ch) = mask;
}
/*
* Receive Frame interrupt handler - this handler is called by the
* DMA interrupt handler indicating that a packet was successfully
* transferred out of the Rx FIFO.
*
* Parameters:
* nif Pointer to Network Interface structure
* ch FEC channel
*/
void fec_rx_frame(uint8_t ch, NIF *nif)
{
ETH_HDR *eth_hdr;
FECBD *pRxBD;
NBUF *cur_nbuf, *new_nbuf;
int keep;
dbg("started\r\n");
while ((pRxBD = fecbd_rx_alloc(ch)) != NULL)
{
fec_log[ch].drxf++;
keep = true;
/*
* Check the Receive Frame Status Word for errors
* - The L bit should always be set
* - No undefined bits should be set
* - The upper 5 bits of the length should be cleared
*/
if (!(pRxBD->status & RX_BD_L) || (pRxBD->status & 0x0608)
|| (pRxBD->length & 0xF800))
{
keep = false;
fec_log[ch].rfsw_inv++;
}
else if (pRxBD->status & RX_BD_ERROR)
{
keep = false;
if (pRxBD->status & RX_BD_NO)
fec_log[ch].rfsw_no++;
if (pRxBD->status & RX_BD_CR)
fec_log[ch].rfsw_cr++;
if (pRxBD->status & RX_BD_OV)
fec_log[ch].rfsw_ov++;
if (pRxBD->status & RX_BD_TR)
fec_log[ch].rfsw_tr++;
}
else
{
if (pRxBD->status & RX_BD_LG)
fec_log[ch].rfsw_lg++;
if (pRxBD->status & RX_BD_M)
fec_log[ch].rfsw_m++;
if (pRxBD->status & RX_BD_BC)
fec_log[ch].rfsw_bc++;
if (pRxBD->status & RX_BD_MC)
fec_log[ch].rfsw_mc++;
}
if (keep)
{
/*
* Pull the network buffer off the Rx ring queue
*/
cur_nbuf = nbuf_remove(NBUF_RX_RING);
/*
* Copy the buffer descriptor information to the network buffer
*/
cur_nbuf->length = (pRxBD->length - (ETH_HDR_LEN + ETH_CRC_LEN));
cur_nbuf->offset = ETH_HDR_LEN;
/*
* Get a new buffer pointer for this buffer descriptor
*/
new_nbuf = nbuf_alloc();
if (new_nbuf == NULL)
{
dbg("nbuf_alloc() failed\n");
/*
* Can't allocate a new network buffer, so we
* have to trash the received data and reuse the buffer
* hoping that some buffers will free up in the system
* and this frame will be re-transmitted by the host
*/
pRxBD->length = RX_BUF_SZ;
pRxBD->status &= (RX_BD_W | RX_BD_INTERRUPT);
pRxBD->status |= RX_BD_E;
nbuf_add(NBUF_RX_RING, cur_nbuf);
fec_rx_continue(ch);
continue;
}
/*
* Add the new network buffer to the Rx ring queue
*/
nbuf_add(NBUF_RX_RING, new_nbuf);
/*
* Re-initialize the buffer descriptor - pointing it
* to the new data buffer. The previous data buffer
* will be passed up the stack
*/
pRxBD->data = new_nbuf->data;
pRxBD->length = RX_BUF_SZ;
pRxBD->status &= (RX_BD_W | RX_BD_INTERRUPT);
pRxBD->status |= RX_BD_E;
/*
* Let the DMA know that there is a new Rx BD (in case the
* ring was full and the DMA was waiting for an empty one)
*/
fec_rx_continue(ch);
/*
* Get pointer to the frame data inside the network buffer
*/
eth_hdr = (ETH_HDR *) cur_nbuf->data;
/*
* Pass the received packet up the network stack if the
* protocol is supported in our network interface (NIF)
*/
if (nif_protocol_exist(nif, eth_hdr->type))
{
hexdump((uint8_t *) eth_hdr, ETH_MAX_FRM);
nif_protocol_handler(nif, eth_hdr->type, cur_nbuf);
}
else
{
nbuf_free(cur_nbuf);
dbg("got unsupported packet %d, trashed it\r\n", eth_hdr->type);
}
}
else
{
/*
* This frame isn't a keeper
* Reset the status and length, but don't need to get another
* buffer since we are trashing the data in the current one
*/
pRxBD->length = RX_BUF_SZ;
pRxBD->status &= (RX_BD_W | RX_BD_INTERRUPT);
pRxBD->status |= RX_BD_E;
/*
* Move the current buffer from the beginning to the end of the
* Rx ring queue
*/
cur_nbuf = nbuf_remove(NBUF_RX_RING);
nbuf_add(NBUF_RX_RING, cur_nbuf);
/*
* Let the DMA know that there are new Rx BDs (in case
* it is waiting for an empty one)
*/
fec_rx_continue(ch);
}
}
}
void fec0_rx_frame(void)
{
extern NIF nif1;
fec_rx_frame(0, &nif1);
}
void fec1_rx_frame(void)
{
extern NIF nif1;
fec_rx_frame(1, &nif1);
}
/*
* Start the FEC Tx DMA task
*
* Parameters:
* ch FEC channel
* txbd First Tx buffer descriptor in the chain
*/
void fec_tx_start(uint8_t ch, int8_t *txbd)
{
uint32_t initiator;
int channel;
void fec0_tx_frame(void);
void fec1_tx_frame(void);
#ifdef DBG_FEC
int res;
#endif
/*
* Make the initiator assignment
*/
#ifdef DBG_FEC
res =
#else
(void)
#endif
dma_set_initiator(DMA_FEC_TX(ch));
dbg("dma_set_initiator(%d) = %d\r\n", ch, res);
/*
* Grab the initiator number
*/
initiator = dma_get_initiator(DMA_FEC_TX(ch));
dbg("dma_get_initiator(%d) = %d\r\n", ch, initiator);
/*
* Determine the DMA channel running the task for the
* selected FEC
*/
channel = dma_set_channel(DMA_FEC_TX(ch),
(ch == 0) ? fec0_tx_frame : fec1_tx_frame);
dbg("dma_set_channel(%d, ...) = %d\r\n", ch, channel);
/*
* Start the Tx DMA task
*/
MCD_startDma(channel,
(int8_t *) txbd,
0,
(int8_t*) MCF_FEC_FECTFDR(ch),
0,
ETH_MTU,
0,
initiator,
FECTX_DMA_PRI(ch),
0
| MCD_FECTX_DMA
| MCD_INTERRUPT
| MCD_TT_FLAGS_CW
| MCD_TT_FLAGS_RL
| MCD_TT_FLAGS_SP
,
0
| MCD_NO_CSUM
| MCD_NO_BYTE_SWAP
);
dbg("DMA tx task started\r\n");
}
/*
* Continue the Tx DMA task
*
* This routine is called after the DMA task has halted after
* encountering an Tx buffer descriptor that wasn't marked as
* ready. There is no harm in calling the continue DMA routine
* if the DMA was not paused.
*
* Parameters:
* ch FEC channel
*/
void fec_tx_continue(uint8_t ch)
{
int channel;
/*
* Determine the DMA channel running the task for the
* selected FEC
*/
channel = dma_get_channel(DMA_FEC_TX(ch));
dbg("dma_get_channel(DMA_FEC_TX(%d)) = %d\r\n", ch, channel);
/*
* Continue/restart the DMA task
*/
MCD_continDma(channel);
dbg("DMA TX task continue\r\n");
}
/*
* Stop all transmissions on the selected FEC and kill the DMA task
*
* Parameters:
* ch FEC channel
*/
void fec_tx_stop(uint8_t ch)
{
uint32_t mask;
int channel;
/* Save off the EIMR value */
mask = MCF_FEC_EIMR(ch);
/* Mask all interrupts */
MCF_FEC_EIMR(ch) = 0;
/* If the Ethernet is still enabled... */
if (MCF_FEC_ECR(ch) & MCF_FEC_ECR_ETHER_EN)
{
/* Issue the Graceful Transmit Stop */
MCF_FEC_TCR(ch) |= MCF_FEC_TCR_GTS;
/* Wait for the Graceful Stop Complete interrupt */
while (!(MCF_FEC_EIR(ch) & MCF_FEC_EIR_GRA))
{
if (!(MCF_FEC_ECR(ch) & MCF_FEC_ECR_ETHER_EN))
break;
}
/* Clear the Graceful Stop Complete interrupt */
MCF_FEC_EIR(ch) = MCF_FEC_EIR_GRA;
}
/*
* Determine the DMA channel running the task for the
* selected FEC
*/
channel = dma_get_channel(DMA_FEC_TX(ch));
/* Kill the FEC Tx DMA task */
MCD_killDma(channel);
/*
* Free up the FEC requestor from the software maintained
* initiator list
*/
dma_free_initiator(DMA_FEC_TX(ch));
/* Free up the DMA channel */
dma_free_channel(DMA_FEC_TX(ch));
/* Restore the interrupt mask register value */
MCF_FEC_EIMR(ch) = mask;
}
/*
* Trasmit Frame interrupt handler - this handler is called by the
* DMA interrupt handler indicating that a packet was successfully
* transferred to the Tx FIFO.
*
* Parameters:
* ch FEC channel
*/
void fec_tx_frame(uint8_t ch)
{
FECBD *pTxBD;
NBUF *pNbuf;
bool is_empty = true;
dbg("\r\n");
while ((pTxBD = fecbd_tx_free(ch)) != NULL)
{
fec_log[ch].dtxf++;
/*
* Grab the network buffer associated with this buffer descriptor
*/
pNbuf = nbuf_remove(NBUF_TX_RING);
/*
* Free up the network buffer that was just transmitted
*/
nbuf_free(pNbuf);
dbg("free buffer %p from TX ring\r\n", pNbuf);
/*
* Re-initialize the Tx BD
*/
pTxBD->data = NULL;
pTxBD->length = 0;
is_empty = false;
}
if (is_empty)
dbg("transmit queue was empty!\r\n");
}
void fec0_tx_frame(void)
{
fec_tx_frame(0);
}
void fec1_tx_frame(void)
{
fec_tx_frame(1);
}
/********************************************************************/
/*
* Send a packet out the selected FEC
*
* Parameters:
* ch FEC channel
* nif Pointer to Network Interface (NIF) structure
* dst Destination MAC Address
* src Source MAC Address
* type Ethernet Frame Type
* length Number of bytes to be transmitted (doesn't include type,
* src, or dest byte count)
* pkt Pointer packet network buffer
*
* Return Value:
* 1 success
* 0 otherwise
*/
int fec_send(uint8_t ch, NIF *nif, uint8_t *dst, uint8_t *src, uint16_t type, NBUF *nbuf)
{
FECBD *pTxBD;
/* Check the length */
if ((nbuf->length + ETH_HDR_LEN) > ETH_MTU)
{
dbg("nbuf->length (%d) + ETH_HDR_LEN (%d) exceeds ETH_MTU (%d)\r\n",
nbuf->length, ETH_HDR_LEN, ETH_MTU);
return 0;
}
/*
* Copy the destination address, source address, and Ethernet
* type into the packet
*/
memcpy(&nbuf->data[0], dst, 6);
memcpy(&nbuf->data[6], src, 6);
memcpy(&nbuf->data[12], &type, 2);
/*
* Grab the next available Tx Buffer Descriptor
*/
while ((pTxBD = fecbd_tx_alloc(ch)) == NULL) {};
/*
* Put the network buffer into the Tx waiting queue
*/
nbuf_add(NBUF_TX_RING, nbuf);
/*
* Setup the buffer descriptor for transmission
*/
pTxBD->data = nbuf->data;
pTxBD->length = nbuf->length + ETH_HDR_LEN;
pTxBD->status |= (TX_BD_R | TX_BD_L);
/*
* Continue the Tx DMA task (in case it was waiting for a new
* TxBD to be ready
*/
fec_tx_continue(ch);
return 1;
}
int fec0_send(NIF *nif, uint8_t *dst, uint8_t *src, uint16_t type, NBUF *nbuf)
{
return fec_send(0, nif, dst, src, type, nbuf);
}
int fec1_send(NIF *nif, uint8_t *dst, uint8_t *src, uint16_t type, NBUF *nbuf)
{
return fec_send(1, nif, dst, src, type, nbuf);
}
/********************************************************************/
/*
* Enable interrupts on the selected FEC
*
* Parameters:
* ch FEC channel
* pri Interrupt Priority
* lvl Interrupt Level
*/
void fec_irq_enable(uint8_t ch, uint8_t lvl, uint8_t pri)
{
/*
* Setup the appropriate ICR
*/
MCF_INTC_ICR((ch == 0) ? 39 : 38) = (uint8_t)(0
| MCF_INTC_ICR_IP(pri)
| MCF_INTC_ICR_IL(lvl));
/*
* Clear any pending FEC interrupt events
*/
MCF_FEC_EIR(ch) = MCF_FEC_EIR_CLEAR_ALL;
/*
* Unmask all FEC interrupts
*/
MCF_FEC_EIMR(ch) = MCF_FEC_EIMR_UNMASK_ALL;
/*
* Unmask the FEC interrupt in the interrupt controller
*/
if (ch == 0)
MCF_INTC_IMRH &= ~MCF_INTC_IMRH_INT_MASK39;
else
MCF_INTC_IMRH &= ~MCF_INTC_IMRH_INT_MASK38;
}
/********************************************************************/
/*
* Disable interrupts on the selected FEC
*
* Parameters:
* ch FEC channel
*/
void fec_irq_disable(uint8_t ch)
{
/*
* Mask all FEC interrupts
*/
MCF_FEC_EIMR(ch) = MCF_FEC_EIMR_MASK_ALL;
/*
* Mask the FEC interrupt in the interrupt controller
*/
if (ch == 0)
MCF_INTC_IMRH |= MCF_INTC_IMRH_INT_MASK39;
else
MCF_INTC_IMRH |= MCF_INTC_IMRH_INT_MASK38;
}
/********************************************************************/
/*
* FEC interrupt handler
* All interrupts are multiplexed into a single vector for each
* FEC module. The lower level interrupt handler passes in the
* channel to this handler. Note that the receive interrupt is
* generated by the Multi-channel DMA FEC Rx task.
*
* Parameters:
* ch FEC channel
*/
static void fec_irq_handler(uint8_t ch)
{
uint32_t event, eir;
/*
* Determine which interrupt(s) asserted by AND'ing the
* pending interrupts with those that aren't masked.
*/
eir = MCF_FEC_EIR(ch);
event = eir & MCF_FEC_EIMR(ch);
if (event != eir)
dbg("pending but not enabled: 0x%08x\r\n", (event ^ eir));
/*
* Clear the event(s) in the EIR immediately
*/
MCF_FEC_EIR(ch) = event;
if (event & MCF_FEC_EIR_RFERR)
{
fec_log[ch].total++;
fec_log[ch].rferr++;
dbg("RFERR\r\n");
dbg("FECRFSR%d = 0x%08x\r\n", ch, MCF_FEC_FECRFSR(ch));
//fec_eth_stop(ch);
}
if (event & MCF_FEC_EIR_XFERR)
{
fec_log[ch].total++;
fec_log[ch].xferr++;
dbg("XFERR\r\n");
}
if (event & MCF_FEC_EIR_XFUN)
{
fec_log[ch].total++;
fec_log[ch].xfun++;
dbg("XFUN\r\n");
//fec_eth_stop(ch);
}
if (event & MCF_FEC_EIR_RL)
{
fec_log[ch].total++;
fec_log[ch].rl++;
dbg("RL\r\n");
}
if (event & MCF_FEC_EIR_LC)
{
fec_log[ch].total++;
fec_log[ch].lc++;
dbg("LC\r\n");
}
if (event & MCF_FEC_EIR_MII)
{
fec_log[ch].mii++;
dbg("MII\r\n");
}
if (event & MCF_FEC_EIR_TXF)
{
fec_log[ch].txf++;
dbg("TXF\r\n");
fec_log_dump(0);
}
if (event & MCF_FEC_EIR_GRA)
{
fec_log[ch].gra++;
dbg("GRA\r\n");
}
if (event & MCF_FEC_EIR_BABT)
{
fec_log[ch].total++;
fec_log[ch].babt++;
dbg("BABT\r\n");
}
if (event & MCF_FEC_EIR_BABR)
{
fec_log[ch].total++;
fec_log[ch].babr++;
dbg("BABR\r\n");
}
if (event & MCF_FEC_EIR_HBERR)
{
fec_log[ch].total++;
fec_log[ch].hberr++;
dbg("HBERR\r\n");
}
}
/*
* handler for FEC interrupts
* arg2 is a pointer to the nif in this case
*/
int fec0_interrupt_handler(void* arg1, void* arg2)
{
(void) arg1; /* not used */
(void) arg2;
fec_irq_handler(0);
return 1;
}
int fec1_interrupt_handler(void* arg1, void* arg2)
{
(void) arg1; /* not used */
(void) arg2;
fec_irq_handler(1);
return 1;
}
/********************************************************************/
/*
* Configure the selected Ethernet port and enable all operations
*
* Parameters:
* ch FEC channel
* trcvr Transceiver mode (MII, 7-Wire or internal loopback)
* speed Maximum operating speed (MII only)
* duplex Full or Half-duplex (MII only)
* mac Physical (MAC) Address
*/
void fec_eth_setup(uint8_t ch, uint8_t trcvr, uint8_t speed, uint8_t duplex, const uint8_t *mac)
{
/*
* Disable FEC interrupts
*/
fec_irq_disable(ch);
/*
* Initialize the event log
*/
fec_log_init(ch);
/*
* Initialize the network buffers and fec buffer descriptors
*/
nbuf_init();
fecbd_init(ch);
/*
* Initialize the FEC
*/
fec_reset(ch);
fec_init(ch, trcvr, mac);
if (trcvr == FEC_MODE_MII)
{
/*
* Initialize the MII interface
*/
#if defined(MACHINE_FIREBEE)
if (am79c874_init(0, 0, speed, duplex))
dbg("PHY init completed\r\n");
else
dbg("PHY init failed\r\n");
#elif defined(MACHINE_M548X)
bcm_5222_init(0, 0, speed, duplex);
#else
fec_mii_init(ch, SYSCLK / 1000);
#endif /* MACHINE_FIREBEE */
}
/*
* Initialize and enable FEC interrupts
*/
fec_irq_enable(ch, FEC_INTC_LVL(ch), FEC_INTC_PRI(ch));
/*
* Enable the multi-channel DMA tasks
*/
fec_rx_start(ch, (int8_t*) fecbd_get_start(ch, Rx));
fec_tx_start(ch, (int8_t*) fecbd_get_start(ch, Tx));
/*
* Enable the FEC channel
*/
MCF_FEC_ECR(ch) |= MCF_FEC_ECR_ETHER_EN;
}
/********************************************************************/
/*
* Reset the selected Ethernet port
*
* Parameters:
* ch FEC channel
*/
void fec_eth_reset(uint8_t ch)
{
// To do
}
/********************************************************************/
/*
* Stop the selected Ethernet port
*
* Parameters:
* ch FEC channel
*/
void fec_eth_stop(uint8_t ch)
{
int level;
/*
* Disable interrupts
*/
level = set_ipl(7);
dbg("fec %d stopped\r\n", ch);
/*
* Gracefully disable the receiver and transmitter
*/
fec_tx_stop(ch);
fec_rx_stop(ch);
/*
* Disable FEC interrupts
*/
fec_irq_disable(ch);
/*
* Disable the FEC channel
*/
MCF_FEC_ECR(ch) &= ~MCF_FEC_ECR_ETHER_EN;
#ifdef DBG_FEC
nbuf_debug_dump();
fec_log_dump(ch);
#endif
/*
* Flush the network buffers
*/
nbuf_flush();
/*
* Restore interrupt level
*/
set_ipl(level);
}
Reference in New Issue View Git Blame Copy Permalink