Firebee/FireBee_SVN
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
2ecd8c8a2f4fb7540bea0e3623ec3c149e04f726
FireBee_SVN/BaS_gcc/sources/mmc.c

657 lines
19 KiB
C
Raw Blame History

#include <stdint.h>
#include <bas_types.h>
#include <sd_card.h>
#include <bas_printf.h>
#include <sysinit.h>
#include <wait.h>
#include <MCF5475.h>
/*
* Firebee: MMCv3/SDv1/SDv2 (SPI mode) control module
*
*
* Copyright (C) 2011, ChaN, all right reserved.
*
* This software is a free software and there is NO WARRANTY.
* No restriction on use. You can use, modify and redistribute it for
* personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
* Redistributions of source code must retain the above copyright notice.
*
*/
/* Copyright (C) 2012, mfro, all rights reserved. */
#define CS_HIGH() { dspi_fifo_val &= ~MCF_DSPI_DTFR_CS5; }
#define CS_LOW() { dspi_fifo_val |= MCF_DSPI_DTFR_CS5; }
#define SPICLK_FAST() { MCF_DSPI_DCTAR0 = MCF_DSPI_DCTAR_TRSZ(0b111) | /* transfer size = 8 bit */ \
MCF_DSPI_DCTAR_PCSSCK(0b01) | /* 1 clock DSPICS to DSPISCK delay prescaler */ \
MCF_DSPI_DCTAR_PASC_3CLK | /* 1 clock DSPISCK to DSPICS negation prescaler */ \
MCF_DSPI_DCTAR_PDT_3CLK | /* 1 clock delay between DSPICS assertions prescaler */ \
MCF_DSPI_DCTAR_PBR_3CLK | /* 3 clock Baudrate prescaler */ \
MCF_DSPI_DCTAR_ASC(0b0001) | /* 2 */ \
MCF_DSPI_DCTAR_DT(0b0010) | /* 2 */ \
MCF_DSPI_DCTAR_BR(0b0000); } /* clock / 2 */
#define SPICLK_SLOW() { MCF_DSPI_DCTAR0 = MCF_DSPI_DCTAR_TRSZ(0b111) | /* transfer size = 8 bit */ \
MCF_DSPI_DCTAR_PCSSCK(0b01) | /* 3 clock DSPICS to DSPISCK delay prescaler */ \
MCF_DSPI_DCTAR_PASC_3CLK | /* 3 clock DSPISCK to DSPICS negation prescaler */ \
MCF_DSPI_DCTAR_PDT_3CLK | /* 3 clock delay between DSPICS assertions prescaler */ \
MCF_DSPI_DCTAR_PBR_3CLK | /* 3 clock prescaler */ \
MCF_DSPI_DCTAR_ASC(0b1001) | /* 1024 */ \
MCF_DSPI_DCTAR_DT(0b1001) | /* 1024 */ \
MCF_DSPI_DCTAR_BR(0b0111); }
/*--------------------------------------------------------------------------
Module Private Functions
---------------------------------------------------------------------------*/
#include "diskio.h"
/* MMC/SD command */
#define CMD0 (0) /* GO_IDLE_STATE */
#define CMD1 (1) /* SEND_OP_COND (MMC) */
#define ACMD41 (0x80+41) /* SEND_OP_COND (SDC) */
#define CMD8 (8) /* SEND_IF_COND */
#define CMD9 (9) /* SEND_CSD */
#define CMD10 (10) /* SEND_CID */
#define CMD12 (12) /* STOP_TRANSMISSION */
#define ACMD13 (0x80+13) /* SD_STATUS (SDC) */
#define CMD16 (16) /* SET_BLOCKLEN */
#define CMD17 (17) /* READ_SINGLE_BLOCK */
#define CMD18 (18) /* READ_MULTIPLE_BLOCK */
#define CMD23 (23) /* SET_BLOCK_COUNT (MMC) */
#define ACMD23 (0x80+23) /* SET_WR_BLK_ERASE_COUNT (SDC) */
#define CMD24 (24) /* WRITE_BLOCK */
#define CMD25 (25) /* WRITE_MULTIPLE_BLOCK */
#define CMD32 (32) /* ERASE_ER_BLK_START */
#define CMD33 (33) /* ERASE_ER_BLK_END */
#define CMD38 (38) /* ERASE */
#define CMD55 (55) /* APP_CMD */
#define CMD58 (58) /* READ_OCR */
static volatile DSTATUS Stat = 0 /* STA_NOINIT */; /* Physical drive status */
static uint8_t CardType; /* Card type flags */
/*-----------------------------------------------------------------------*/
/* Send/Receive data to the MMC (Platform dependent) */
/*-----------------------------------------------------------------------*/
static uint32_t dspi_fifo_val = /* CONT disable continous chip select */
/* CTAS use DCTAR0 for clock and attributes */
MCF_DSPI_DTFR_EOQ | /* current transfer is last in queue */
MCF_DSPI_DTFR_CTCNT;
/* Exchange a byte */
static uint8_t xchg_spi(uint8_t byte)
{
uint32_t fifo = dspi_fifo_val | byte;
uint8_t res;
MCF_DSPI_DTFR = fifo;
while (! (MCF_DSPI_DSR & MCF_DSPI_DSR_TCF)); /* wait until DSPI transfer complete */
MCF_DSPI_DSR = 0xffffffff; /* clear DSPI status register */
while (! (MCF_DSPI_DSR & MCF_DSPI_DSR_TCF)); /* wait again for transfer to complete */
fifo = MCF_DSPI_DRFR;
MCF_DSPI_DSR = 0xffffffff; /* clear status register */
res = fifo & 0xff;
return res;
}
/* Receive multiple byte
*
* buff: pointer to data buffer
* btr: number of bytes to receive (16, 64 or 512)
*/
static void rcvr_spi_multi(uint8_t *buff, uint32_t count)
{
int i;
for (i = 0; i < count; i++)
*buff++ = xchg_spi(0xff);
}
#if _USE_WRITE
/* Send multiple byte
*
* buff: pointer to data
* btx: number of bytes to send
*/
static void xmit_spi_multi(const uint8_t *buff, uint32_t btx)
{
int i;
for (i = 0; i < btx; i++)
xchg_spi(*buff++);
}
#endif
static bool card_ready(void)
{
uint8_t d;
d = xchg_spi(0xff);
return (d == 0xff);
}
/*
* Wait for card ready
*
* wt: timeout in ms
* returns 1: ready, 0: timeout
*/
static int wait_ready(uint32_t wt)
{
return waitfor(wt, card_ready);
}
/*
* Deselect card and release SPI
*/
static void deselect(void)
{
CS_HIGH();
xchg_spi(0xFF); /* Dummy clock (force DO hi-z for multiple slave SPI) */
}
/*
* Select card and wait for ready
*/
static int select(void) /* 1:OK, 0:Timeout */
{
CS_LOW();
xchg_spi(0xFF); /* Dummy clock (force DO enabled) */
if (wait_ready(5000000))
return 1; /* OK */
deselect();
return 0; /* Timeout */
}
/*
* Control SPI module (Platform dependent)
*/
static void power_on (void) /* Enable SSP module */
{
MCF_PAD_PAR_DSPI = 0x1fff; /* configure all DSPI GPIO pins for DSPI usage */
/*
* FIXME: really necessary or just an oversight
* that PAD_PAR_DSPI is only 16 bit?
*/
// MCF_PAD_PAR_TIMER = 0xff; leave off for now
/*
* initialize DSPI module configuration register
*/
MCF_DSPI_DMCR = MCF_DSPI_DMCR_MSTR | /* FireBee is DSPI master*/
MCF_DSPI_DMCR_CSIS5 | /* CS5 inactive state high */
MCF_DSPI_DMCR_CSIS3 | /* CS3 inactive state high */
MCF_DSPI_DMCR_CSIS2 | /* CS2 inactive state high */
MCF_DSPI_DMCR_DTXF | /* disable transmit FIFO */
MCF_DSPI_DMCR_DRXF | /* disable receive FIFO */
MCF_DSPI_DMCR_CTXF | /* clear transmit FIFO */
MCF_DSPI_DMCR_CRXF; /* clear receive FIFO */
/* initialize DSPI clock and transfer attributes register 0 */
MCF_DSPI_DCTAR0 = MCF_DSPI_DCTAR_TRSZ(0b111) | /* transfer size = 8 bit */
MCF_DSPI_DCTAR_PCSSCK(0b01) | /* 3 clock DSPICS to DSPISCK delay prescaler */
MCF_DSPI_DCTAR_PASC_3CLK | /* 3 clock DSPISCK to DSPICS negation prescaler */
MCF_DSPI_DCTAR_PDT_3CLK | /* 3 clock delay between DSPICS assertions prescaler */
MCF_DSPI_DCTAR_PBR_3CLK | /* 3 clock prescaler */
MCF_DSPI_DCTAR_ASC(0b1001) | /* 1024 */
MCF_DSPI_DCTAR_DT(0b1001) | /* 1024 */
MCF_DSPI_DCTAR_BR(0b0111);
CS_HIGH(); /* Set CS# high */
/* card should now be initialized as MMC */
wait(10 * 1000); /* 10ms */
}
static
void power_off (void) /* Disable SPI function */
{
select(); /* Wait for card ready */
deselect();
}
/*-----------------------------------------------------------------------*/
/* Receive a data packet from the MMC */
/*-----------------------------------------------------------------------*/
static
int rcvr_datablock ( /* 1:OK, 0:Error */
uint8_t *buff, /* Data buffer */
uint32_t btr /* Data block length (byte) */
)
{
uint8_t token;
uint32_t target = MCF_SLT_SCNT(0) - (400 * 1000L * 132);
do { /* Wait for DataStart token in timeout of 200ms */
token = xchg_spi(0xFF);
/* This loop will take a time. Insert rot_rdq() here for multitask envilonment. */
} while ((token == 0xFF) && MCF_SLT_SCNT(0) > target);
if(token != 0xFE) return 0; /* Function fails if invalid DataStart token or timeout */
rcvr_spi_multi(buff, btr); /* Store trailing data to the buffer */
xchg_spi(0xFF); xchg_spi(0xFF); /* Discard CRC */
return 1; /* Function succeeded */
}
/*-----------------------------------------------------------------------*/
/* Send a data packet to the MMC */
/*-----------------------------------------------------------------------*/
#if _USE_WRITE
static
int xmit_datablock ( /* 1:OK, 0:Failed */
const uint8_t *buff, /* Ponter to 512 byte data to be sent */
uint8_t token /* Token */
)
{
uint8_t resp;
if (!wait_ready(500)) return 0; /* Wait for card ready */
xchg_spi(token); /* Send token */
if (token != 0xFD) { /* Send data if token is other than StopTran */
xmit_spi_multi(buff, 512); /* Data */
xchg_spi(0xFF); xchg_spi(0xFF); /* Dummy CRC */
resp = xchg_spi(0xFF); /* Receive data resp */
if ((resp & 0x1F) != 0x05) /* Function fails if the data packet was not accepted */
return 0;
}
return 1;
}
#endif
/*-----------------------------------------------------------------------*/
/* Send a command packet to the MMC */
/*-----------------------------------------------------------------------*/
static uint8_t send_cmd ( /* Return value: R1 resp (bit7==1:Failed to send) */
uint8_t cmd, /* Command index */
uint32_t arg /* Argument */
)
{
uint8_t n, res;
if (cmd & 0x80) { /* Send a CMD55 prior to ACMD<n> */
cmd &= 0x7F;
res = send_cmd(CMD55, 0);
if (res > 1) return res;
}
/* Select card */
deselect();
if (!select()) return 0xFF;
/* Send command packet */
xchg_spi(0x40 | cmd); /* Start + command index */
xchg_spi((uint8_t)(arg >> 24)); /* Argument[31..24] */
xchg_spi((uint8_t)(arg >> 16)); /* Argument[23..16] */
xchg_spi((uint8_t)(arg >> 8)); /* Argument[15..8] */
xchg_spi((uint8_t)arg); /* Argument[7..0] */
n = 0x01; /* Dummy CRC + Stop */
if (cmd == CMD0) n = 0x95; /* Valid CRC for CMD0(0) */
if (cmd == CMD8) n = 0x87; /* Valid CRC for CMD8(0x1AA) */
xchg_spi(n);
/* Receive command resp */
if (cmd == CMD12) xchg_spi(0xFF); /* Diacard following one byte when CMD12 */
n = 10; /* Wait for response (10 bytes max) */
do
res = xchg_spi(0xFF);
while ((res & 0x80) && --n);
return res; /* Return received response */
}
/*--------------------------------------------------------------------------
Public Functions
---------------------------------------------------------------------------*/
/*
* Initialize disk drive
*
* drv: physical drive number (0)
*/
DSTATUS disk_initialize(uint8_t drv)
{
uint8_t n, cmd, ty, ocr[4];
if (drv) return STA_NOINIT; /* Supports only drive 0 */
power_on(); /* Initialize SPI */
if (Stat & STA_NODISK) return Stat; /* Is card existing in the socket? */
SPICLK_SLOW();
for (n = 10; n; n--) xchg_spi(0xFF); /* Send 80 dummy clocks */
ty = 0;
if (send_cmd(CMD0, 0) == 1) { /* Put the card SPI/Idle state */
uint32_t target = MCF_SLT_SCNT(0) - (1000L * 1000L * 132); /* 1 sec */
if (send_cmd(CMD8, 0x1AA) == 1) { /* SDv2? */
for (n = 0; n < 4; n++) ocr[n] = xchg_spi(0xFF); /* Get 32 bit return value of R7 resp */
if (ocr[2] == 0x01 && ocr[3] == 0xAA) { /* Is the card supports vcc of 2.7-3.6V? */
while (MCF_SLT_SCNT(0) > target && send_cmd(ACMD41, 1UL << 30)) ; /* Wait for end of initialization with ACMD41(HCS) */
if (MCF_SLT_SCNT(0) > target && send_cmd(CMD58, 0) == 0) { /* Check CCS bit in the OCR */
for (n = 0; n < 4; n++) ocr[n] = xchg_spi(0xFF);
ty = (ocr[0] & 0x40) ? CT_SD2 | CT_BLOCK : CT_SD2; /* Card id SDv2 */
}
}
} else { /* Not SDv2 card */
if (send_cmd(ACMD41, 0) <= 1) { /* SDv1 or MMC? */
ty = CT_SD1; cmd = ACMD41; /* SDv1 (ACMD41(0)) */
} else {
ty = CT_MMC; cmd = CMD1; /* MMCv3 (CMD1(0)) */
}
while (MCF_SLT_SCNT(0) > target && send_cmd(cmd, 0)) ; /* Wait for end of initialization */
if (!MCF_SLT_SCNT(0) > target || send_cmd(CMD16, 512) != 0) /* Set block length: 512 */
ty = 0;
}
}
CardType = ty; /* Card type */
deselect();
if (ty) { /* OK */
SPICLK_FAST(); /* Set fast clock */
Stat &= ~STA_NOINIT; /* Clear STA_NOINIT flag */
} else { /* Failed */
power_off();
Stat = STA_NOINIT;
}
return Stat;
}
/*-----------------------------------------------------------------------*/
/* Get disk status */
/*-----------------------------------------------------------------------*/
DSTATUS disk_status (
uint8_t drv /* Physical drive number (0) */
)
{
if (drv) return STA_NOINIT; /* Supports only drive 0 */
return Stat; /* Return disk status */
}
/*-----------------------------------------------------------------------*/
/* Read sector(s) */
/*-----------------------------------------------------------------------*/
DRESULT disk_read (
uint8_t drv, /* Physical drive number (0) */
uint8_t *buff, /* Pointer to the data buffer to store read data */
uint32_t sector, /* Start sector number (LBA) */
uint8_t count /* Number of sectors to read (1..128) */
)
{
if (drv || !count) return RES_PARERR; /* Check parameter */
if (Stat & STA_NOINIT) return RES_NOTRDY; /* Check if drive is ready */
if (!(CardType & CT_BLOCK)) sector *= 512; /* LBA ot BA conversion (byte addressing cards) */
if (count == 1) { /* Single sector read */
if ((send_cmd(CMD17, sector) == 0) /* READ_SINGLE_BLOCK */
&& rcvr_datablock(buff, 512))
count = 0;
}
else { /* Multiple sector read */
if (send_cmd(CMD18, sector) == 0) { /* READ_MULTIPLE_BLOCK */
do {
if (!rcvr_datablock(buff, 512)) break;
buff += 512;
} while (--count);
send_cmd(CMD12, 0); /* STOP_TRANSMISSION */
}
}
deselect();
return count ? RES_ERROR : RES_OK; /* Return result */
}
/*-----------------------------------------------------------------------*/
/* Write sector(s) */
/*-----------------------------------------------------------------------*/
#if _USE_WRITE
DRESULT disk_write (
uint8_t drv, /* Physical drive number (0) */
const uint8_t *buff, /* Ponter to the data to write */
uint32_t sector, /* Start sector number (LBA) */
uint8_t count /* Number of sectors to write (1..128) */
)
{
if (drv || !count) return RES_PARERR; /* Check parameter */
if (Stat & STA_NOINIT) return RES_NOTRDY; /* Check drive status */
if (Stat & STA_PROTECT) return RES_WRPRT; /* Check write protect */
if (!(CardType & CT_BLOCK)) sector *= 512; /* LBA ==> BA conversion (byte addressing cards) */
if (count == 1) { /* Single sector write */
if ((send_cmd(CMD24, sector) == 0) /* WRITE_BLOCK */
&& xmit_datablock(buff, 0xFE))
count = 0;
}
else { /* Multiple sector write */
if (CardType & CT_SDC) send_cmd(ACMD23, count); /* Predefine number of sectors */
if (send_cmd(CMD25, sector) == 0) { /* WRITE_MULTIPLE_BLOCK */
do {
if (!xmit_datablock(buff, 0xFC)) break;
buff += 512;
} while (--count);
if (!xmit_datablock(0, 0xFD)) /* STOP_TRAN token */
count = 1;
}
}
deselect();
return count ? RES_ERROR : RES_OK; /* Return result */
}
#endif
/*-----------------------------------------------------------------------*/
/* Miscellaneous drive controls other than data read/write */
/*-----------------------------------------------------------------------*/
#if _USE_IOCTL
DRESULT disk_ioctl (
uint8_t drv, /* Physical drive number (0) */
uint8_t ctrl, /* Control command code */
void *buff /* Pointer to the conrtol data */
)
{
DRESULT res;
uint8_t n, csd[16], *ptr = buff;
uint32_t *dp, st, ed, csize;
if (drv) return RES_PARERR; /* Check parameter */
if (Stat & STA_NOINIT) return RES_NOTRDY; /* Check if drive is ready */
res = RES_ERROR;
switch (ctrl) {
case CTRL_SYNC : /* Wait for end of internal write process of the drive */
if (select()) {
deselect();
res = RES_OK;
}
break;
case GET_SECTOR_COUNT : /* Get drive capacity in unit of sector (DWORD) */
if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) {
if ((csd[0] >> 6) == 1) { /* SDC ver 2.00 */
csize = csd[9] + ((uint16_t)csd[8] << 8) + ((uint32_t)(csd[7] & 63) << 16) + 1;
*(uint32_t*)buff = csize << 10;
} else { /* SDC ver 1.XX or MMC ver 3 */
n = (csd[5] & 15) + ((csd[10] & 128) >> 7) + ((csd[9] & 3) << 1) + 2;
csize = (csd[8] >> 6) + ((uint16_t)csd[7] << 2) + ((uint16_t)(csd[6] & 3) << 10) + 1;
*(uint32_t*)buff = csize << (n - 9);
}
res = RES_OK;
}
break;
case GET_SECTOR_SIZE : /* Get sector size in unit of byte (WORD) */
*(uint16_t*)buff = 512;
res = RES_OK;
break;
case GET_BLOCK_SIZE : /* Get erase block size in unit of sector (DWORD) */
if (CardType & CT_SD2) { /* SDC ver 2.00 */
if (send_cmd(ACMD13, 0) == 0) { /* Read SD status */
xchg_spi(0xFF);
if (rcvr_datablock(csd, 16)) { /* Read partial block */
for (n = 64 - 16; n; n--) xchg_spi(0xFF); /* Purge trailing data */
*(uint32_t*)buff = 16UL << (csd[10] >> 4);
res = RES_OK;
}
}
} else { /* SDC ver 1.XX or MMC */
if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) { /* Read CSD */
if (CardType & CT_SD1) { /* SDC ver 1.XX */
*(uint32_t*)buff = (((csd[10] & 63) << 1) + ((uint16_t)(csd[11] & 128) >> 7) + 1) << ((csd[13] >> 6) - 1);
} else { /* MMC */
*(uint32_t*)buff = ((uint16_t)((csd[10] & 124) >> 2) + 1) * (((csd[11] & 3) << 3) + ((csd[11] & 224) >> 5) + 1);
}
res = RES_OK;
}
}
break;
case CTRL_ERASE_SECTOR : /* Erase a block of sectors (used when _USE_ERASE == 1) */
if (!(CardType & CT_SDC)) break; /* Check if the card is SDC */
if (disk_ioctl(drv, MMC_GET_CSD, csd)) break; /* Get CSD */
if (!(csd[0] >> 6) && !(csd[10] & 0x40)) break; /* Check if sector erase can be applied to the card */
dp = buff; st = dp[0]; ed = dp[1]; /* Load sector block */
if (!(CardType & CT_BLOCK)) {
st *= 512; ed *= 512;
}
if (send_cmd(CMD32, st) == 0 && send_cmd(CMD33, ed) == 0 && send_cmd(CMD38, 0) == 0 && wait_ready(30000)) /* Erase sector block */
res = RES_OK; /* FatFs does not check result of this command */
break;
/* Following command are not used by FatFs module */
case MMC_GET_TYPE : /* Get MMC/SDC type (BYTE) */
*ptr = CardType;
res = RES_OK;
break;
case MMC_GET_CSD : /* Read CSD (16 bytes) */
if (send_cmd(CMD9, 0) == 0 /* READ_CSD */
&& rcvr_datablock(ptr, 16))
res = RES_OK;
break;
case MMC_GET_CID : /* Read CID (16 bytes) */
if (send_cmd(CMD10, 0) == 0 /* READ_CID */
&& rcvr_datablock(ptr, 16))
res = RES_OK;
break;
case MMC_GET_OCR : /* Read OCR (4 bytes) */
if (send_cmd(CMD58, 0) == 0) { /* READ_OCR */
for (n = 4; n; n--) *ptr++ = xchg_spi(0xFF);
res = RES_OK;
}
break;
case MMC_GET_SDSTAT : /* Read SD status (64 bytes) */
if (send_cmd(ACMD13, 0) == 0) { /* SD_STATUS */
xchg_spi(0xFF);
if (rcvr_datablock(ptr, 64))
res = RES_OK;
}
break;
default:
res = RES_PARERR;
break;
}
deselect();
return res;
}
#endif
/*-----------------------------------------------------------------------*/
/* Device timer function */
/*-----------------------------------------------------------------------*/
/* This function must be called from timer interrupt routine in period
/ of 1 ms to generate card control timing.
*/
#ifdef _NOT_USED_
void disk_timerproc (void)
{
uint8_t s;
s = Stat;
if (WP) /* Write protected */
s |= STA_PROTECT;
else /* Write enabled */
s &= ~STA_PROTECT;
//if (INS) /* Card is in socket */
s &= ~STA_NODISK;
//else /* Socket empty */
// s |= (STA_NODISK | STA_NOINIT);
Stat = s;
}
#endif /* _NOT_USED_ */
Reference in New Issue View Git Blame Copy Permalink