#!/usr/local/bin/bdmctrl 
#
# m548x board initialization for bdmctrl 
#
open $1
reset
wait

# set VBR
write-ctrl 0x0801 0x00000000
dump-register VBR

# Turn on MBAR at 0xFF00_0000
write-ctrl 0x0C0F 0xFF000000
dump-register MBAR

# Turn on RAMBAR0 at address FF10_0000 
write-ctrl 0x0C04 0xFF100007

# Turn on RAMBAR1 at address FF10_1000 (disabled - not mapped by bdm currently)
write-ctrl 0x0C05 0xFF101001

#
# Init CS0 (BootFLASH @ E000_0000 - E03F_FFFF 4Mbytes)
write 0xFF000500 0xE0000000 4
write 0xFF000508 0x00041180 4
write 0xFF000504 0x003F0001 4

# SDRAM Initialization @ 0000_0000 - 03FF_FFFF 64 Mbytes
write 0xFF000004 0x000002AA 4 # SDRAMDS configuration
write 0xFF000020 0x00000019 4 # SDRAM CS0 configuration (128Mbytes 0000_0000 - 07FF_FFFF)
write 0xFF000024 0x08000000 4 # SDRAM CS1 configuration (128Mbytes 0800_0000 - 0FFF_FFFF)
write 0xFF000028 0x10000000 4 # SDRAM CS2 configuration (128Mbytes 1000_0000 - 17FF_FFFF)
write 0xFF00002C 0x18000000 4 # SDRAM CS3 configuration (128Mbytes 1800_0000 - 1FFF_FFFF)
write 0xFF000108 0x73711630 4 # SDCFG1
write 0xFF00010C 0x46370000 4 # SDCFG2

write 0xFF000104 0xE10B0002 4 # SDCR + IPALL
write 0xFF000100 0x40010000 4 # SDMR (write to LEMR)
write 0xFF000100 0x058D0000 4 # SDMR (write to LMR)
sleep 100
write 0xFF000104 0xE10D0002 4 # SDCR + IPALL
write 0xFF000104 0xE10D0004 4 # SDCR + IREF (first refresh)
write 0xFF000104 0xE10D0004 4 # SDCR + IREF (first refresh)
write 0xFF000100 0x018D0000 4 # SDMR (write to LMR)
write 0xFF000104 0x710D0F00 4 # SDCR (lock SDMR and enable refresh)
sleep 10


# use system sdram as flashlib scratch area.
# TODO: plugin flashing seems to work o.k. now for smaller binaries, while it doesn't for larger ones (EmuTOS) yet.
# This seems to be related to large flash buffers and PC-relative adressing of the plugin
#flash-plugin 0x1000 0xf000 flash29.plugin
# notify flashlib that we have flash at address 0xE0000000, length 0x7FFFFF, plugin is flash29
flash 0xE0000000 flashintelc3

# Erase flash from 0xE0000000 to 0xE00FFFFF (reserved space for BaS)
#
# Caution: sector offset numbers need to be the ones from the x16 address range
# column and they vary in size - needs to be exactly as in the data sheet (p. 9)
#
# contrary to documentation, it seems we need to erase-wait after each sector

erase 0xE0000000 -1
#erase 0xE0000000 0x01000
#erase 0xE0000000 0x02000
#erase 0xE0000000 0x03000
#erase 0xE0000000 0x04000
#erase 0xE0000000 0x05000
#erase 0xE0000000 0x06000
#erase 0xE0000000 0x07000
#erase 0xE0000000 0x08000
#erase 0xE0000000 0x10000
#erase-wait 0xe0000000
#blank-chk 0xE0000000 0x10000
load -v m5484lite/bas.elf
wait