modified comments

BaS_gcc/run_bas.bdm

@@ -1,4 +1,4 @@
-#!/usr/local/bin/bdmctrl -D2
+#!/usr/local/bin/bdmctrl -D2 -v9 -d9
 #
 # firebee board initialization for bdmctrl 
 #
@@ -6,44 +6,36 @@ open $1
 reset
 sleep 10
 
-wait
-
 # set VBR
-#write-ctrl 0x0801 0x00000000
-sleep 10
+write-ctrl 0x0801 0x00000000
 # Turn on MBAR at 0xFF00_0000
 write-ctrl 0x0C0F 0xFF000000
-
-# Turn on MMUBAR at 0xFF04_0000
-write-ctrl 0x0008	0xFF040001
-
 # Turn on RAMBAR0 at address FF10_0000 
 write-ctrl 0x0C04 0xFF100007
-sleep 10
 # Turn on RAMBAR1 at address FF10_1000 
 write-ctrl 0x0C05 0xFF101001
-sleep 10
 
 # Init CS0 (BootFLASH @ E000_0000 - E07F_FFFF 8Mbytes)
 write 0xFF000500 0xE0000000 4
-write 0xFF000508 0x00001180 4
+write 0xFF000508 0x00041180 4
 write 0xFF000504 0x007F0001 4
+
 # Init CS1 (Atari I/O address range)
-write 0xFF00050C 0xFFF00000 4
-write 0xFF000514 0x00002180 4
-write 0xFF000510 0x000F0001 4
+#write 0xFF00050C 0xFFF00000 4
+#write 0xFF000514 0x00002180 4
+#write 0xFF000510 0x000F0001 4
 # Init CS2 (FireBee 32 bit I/O address range)
-write 0xFF000518 0xF0000000 4
-write 0xFF000520 0x00002100 4
-write 0xFF00051C 0x07FF0001 4
+#write 0xFF000518 0xF0000000 4
+#write 0xFF000520 0x00002100 4
+#write 0xFF00051C 0x07FF0001 4
 # Init CS3 (FireBee 16 bit I/O address range)
-write 0xFF000524 0xF8000000 4
-write 0xFF00052C 0x00000180 4
-write 0xFF000528 0x03FF0001 4
+#write 0xFF000524 0xF8000000 4
+#write 0xFF00052C 0x00000180 4
+#write 0xFF000528 0x03FF0001 4
 # Init CS4 (FireBee video address range)
-write 0xFF000530 0x40000000 4
-write 0xFF000538 0x00000018 4
-write 0xFF000534 0x003F0001 4
+#write 0xFF000530 0x40000000 4
+#write 0xFF000538 0x00000018 4
+#write 0xFF000534 0x003F0001 4
 
 
 # SDRAM Initialization @ 0000_0000 - 1FFF_FFFF 512Mbytes
@@ -64,9 +56,7 @@ write 0xFF000104 0xE10D0004 4	# SDCR + IREF (first refresh)
 write 0xFF000100 0x008D0000 4	# SDMR (write to LMR)
 write 0xFF000104 0x710D0F00 4	# SDCR (lock SDMR and enable refresh)
 
-write 0xFF000240 0x80000000 4	# disable watchdog arbiter
-
 load -v ram.elf
 wait
-sleep 100
+sleep 10
 execute

BaS_gcc/sources/init_fpga.c

@@ -38,8 +38,8 @@
  */
 void init_fpga(void)
 {
-	register uint8_t *fpga_data;
-	register int i;
+	uint8_t *fpga_data;
+	int i;
 
 	xprintf("FPGA load config... ");
 
@@ -93,6 +93,7 @@ void init_fpga(void)
 		}
 	} while ((!(MCF_GPIO_PPDSDR_FEC1L & FPGA_CONF_DONE)) && (fpga_data < (uint8_t *) FPGA_FLASH_DATA_END));
 
+#ifdef _NOT_USED_ /* doesn't seem to be needed */
 	if (fpga_data < (uint8_t *) FPGA_FLASH_DATA_END)
 	{
 		while (fpga_data++ < (uint8_t *) FPGA_FLASH_DATA_END)
@@ -108,4 +109,5 @@ void init_fpga(void)
 	{
 		xprintf("FAILED!\r\n");
 	}
+#endif /* _NOT_USED_ */
 }

BaS_gcc/sources/mmu.S

@@ -84,28 +84,28 @@ _mmu_init:
 		move.l	d2,-(sp)
 
  		clr.l	d0
-		movec	d0,ASID				// ASID allways 0
-		move.l	d0,_rt_asid			// sichern
+		movec	d0,ASID				// ASID always 0
+		move.l	d0,_rt_asid			// save
 		
 		move.l	#0xC03FC040,d0		// data r/w precise  c000'0000-ffff'ffff
 		movec	d0,ACR0
-		move.l	d0,_rt_acr0			// sichern
+		move.l	d0,_rt_acr0			// save
 		
 		move.l	#0x601FC000,d0		// data r/w wt 6000'0000-7fff'ffff
 		movec	d0,ACR1
-		move.l	d0,_rt_acr1			// sichern
+		move.l	d0,_rt_acr1			// save
 		
 		move.l	#0xe007C400,d0		// instruction r wt e000'0000-e07f'ffff
 		movec	d0,ACR2
-		move.l	d0,_rt_acr2			// sichern
+		move.l	d0,_rt_acr2			// save
 
-		clr.l	d0					// acr3 aus
+		clr.l	d0					// acr3 off
 		movec	d0,ACR3
-		move.l	d0,_rt_acr3			// sichern
+		move.l	d0,_rt_acr3			// save
 
 		move.l	#__MMUBAR+1,d0
-		movec	d0,MMUBAR			//mmubar setzen
-		move.l	d0,_rt_mmubar		// sichern
+		movec	d0,MMUBAR			// set MMUBAR
+		move.l	d0,_rt_mmubar		// save
 		
 		nop
 		
@@ -188,8 +188,8 @@ _mmutr_miss:
 		or.l	#cb_mmudr,d0		
 		move.l	d0,MCF_MMU_MMUDR
 		moveq.l	#mmuord_d,d0					// MMU update data
-		move.l	d0,MCF_MMU_MMUOR				// setzen  
+		move.l	d0,MCF_MMU_MMUOR				// set
 		moveq.l	#mmuord_i,d0					// MMU update instruction
-		move.l	d0,MCF_MMU_MMUOR				// setzen  
+		move.l	d0,MCF_MMU_MMUOR				// set
 		move.l	(sp)+,d0
 		rte