Firebee/FireBee_SVN
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fix consistancy (#ifdef, #if defined(), #if)

Browse Source
This commit is contained in:
Markus Fröschle
2015-11-19 19:00:44 +00:00
parent ba0f01d09c
commit 86d141b577
2 changed files with 13 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
BaS_gcc/sys/sysinit.c
View File

@@ -126,13 +126,13 @@ static void init_gpio(void)
* /PCIBG1 used as /PCIBG1
* /PCIBG0 used as /PCIBG0
*/
#if MACHINE_FIREBEE
#if defined(MACHINE_FIREBEE)
MCF_PAD_PAR_PCIBG = MCF_PAD_PAR_PCIBG_PAR_PCIBG4_TBST |
MCF_PAD_PAR_PCIBG_PAR_PCIBG3_GPIO |
MCF_PAD_PAR_PCIBG_PAR_PCIBG2_PCIBG2 |
MCF_PAD_PAR_PCIBG_PAR_PCIBG1_PCIBG1 |
MCF_PAD_PAR_PCIBG_PAR_PCIBG0_PCIBG0;
#elif MACHINE_M5484LITE
#elif defined(MACHINE_M5484LITE)
MCF_PAD_PAR_PCIBG = MCF_PAD_PAR_PCIBG_PAR_PCIBG4_PCIBG4 |
MCF_PAD_PAR_PCIBG_PAR_PCIBG3_PCIBG3 |
MCF_PAD_PAR_PCIBG_PAR_PCIBG2_PCIBG2 |
@@ -218,10 +218,10 @@ static void init_serial(void)
MCF_PSC0_PSCSICR = 0; /* PSC control register: select UART mode */
MCF_PSC0_PSCCSR = 0xDD; /* use TX and RX baud rate from PSC timer */
MCF_PSC0_PSCCTUR = 0x00; /* =\ */
#ifdef MACHINE_FIREBEE
#if defined(MACHINE_FIREBEE)
MCF_PSC0_PSCCTLR = 36; /* divide sys_clk by 36 => BAUD RATE = 115200 bps */
#endif
#ifdef MACHINE_M5484LITE
#if defined(MACHINE_M5484LITE)
MCF_PSC0_PSCCTLR = 27; /* LITE board has 100 MHz sys_clk only */
#endif
MCF_PSC0_PSCCR = 0x20; /* reset receiver and RxFIFO */
@@ -242,7 +242,7 @@ static void init_serial(void)
MCF_PSC0_PSCOPSET = 0x01;
MCF_PSC0_PSCCR = 0x05;
#ifdef MACHINE_FIREBEE /* PSC3 is not connected to anything on the LITE board */
#if defined(MACHINE_FIREBEE) /* PSC3 is not connected to anything on the LITE board */
/* PSC3: PIC */
MCF_PSC3_PSCSICR = 0; // UART
MCF_PSC3_PSCCSR = 0xDD;
@@ -296,7 +296,7 @@ static bool init_ddram(void)
*/
MCF_SDRAMC_SDRAMDS = 0x000002AA;/* SDRAMDS configuration */
#if MACHINE_FIREBEE
#if defined(MACHINE_FIREBEE)
MCF_SDRAMC_CS0CFG = 0x0000001A; /* SDRAM CS0 configuration (128Mbytes 0000_0000 - 07FF_FFFF) */
MCF_SDRAMC_CS1CFG = 0x0800001A; /* SDRAM CS1 configuration (128Mbytes 0800_0000 - 0FFF_FFFF) */
MCF_SDRAMC_CS2CFG = 0x1000001A; /* SDRAM CS2 configuration (128Mbytes 1000_0000 - 07FF_FFFF) */
@@ -339,7 +339,7 @@ static bool init_ddram(void)
MCF_SDRAMC_SDMR = 0x008D0000; /* SDMR (write to LMR) */
MCF_SDRAMC_SDCR = 0x710D0F00; /* SDCR (lock SDMR and enable refresh) */
#elif MACHINE_M5484LITE
#elif defined(MACHINE_M5484LITE)
MCF_SDRAMC_CS0CFG = 0x00000019; /* SDRAM CS0 configuration (64 Mbytes 0000_0000 - 03FF_FFFF) */
MCF_SDRAMC_CS1CFG = 0x00000000; /* SDRAM CS1 configuration - off */
MCF_SDRAMC_CS2CFG = 0x00000000; /* SDRAM CS2 configuration - off */
@@ -635,7 +635,7 @@ void init_usb(void)
xprintf("finished (found %d USB controller(s))\r\n", usb_found);
}
#ifdef MACHINE_FIREBEE
#if defined(MACHINE_FIREBEE)
static bool i2c_transfer_finished(void)
{
@@ -943,7 +943,7 @@ static void clear_bss_segment(void)
void initialize_hardware(void)
{
/* Test for FireTOS switch: DIP switch #5 up */
#ifdef MACHINE_FIREBEE
#if defined(MACHINE_FIREBEE)
if (!(DIP_SWITCH & (1 << 6))) {
/* Minimal hardware initialization */
init_gpio();
@@ -976,7 +976,7 @@ void initialize_hardware(void)
xprintf("\n\n");
xprintf("%s BASIS system (BaS) v %d.%d (%s, %s)\r\n\r\n",
#if MACHINE_FIREBEE
#if defined(MACHINE_FIREBEE)
"Firebee"
#elif MACHINE_M5484LITE
"m5484 LITEKIT"
@@ -1117,7 +1117,7 @@ void initialize_hardware(void)
}
#if MACHINE_FIREBEE
#if defined(MACHINE_FIREBEE)
fpga_configured = init_fpga();
init_pll();