modified to enable remote debugging of basflash.s19.

basflash.s19 does not work in this version (hang)!

.gdbinit

@@ -1,12 +1,10 @@
 #set disassemble-next-line on
-define tr
+define pdtr
 	target remote | m68k-bdm-gdbserver pipe /dev/bdmcf3
+	monitor bdm-reset
 end
-define tbtr
+define tr
 	target remote | m68k-bdm-gdbserver pipe /dev/tblcf3
 end
-
-tr
-
 source mcf5474.gdb
 

Makefile

@@ -35,8 +35,8 @@ CFLAGS=-mcpu=5474\
 	   -g\
 	   -Wno-multichar\
 	   -Winline\
-	   -Os\
+	   -O \
-	   -fomit-frame-pointer\
+	   -fno-omit-frame-pointer\
 	   -fno-strict-aliasing\
 	   -ffreestanding\
 	   -fleading-underscore\
@@ -107,7 +107,7 @@ $(RAM_EXEC): TARGET_ADDRESS=0x10000000
 $(RAM_EXEC): LDCFILE=ram.lk
 $(RAM_EXEC): MAPFILE=ram.map
 
-$(BASFLASH_EXEC): TARGET_ADDRESS=0x00040000
+$(BASFLASH_EXEC): TARGET_ADDRESS=0x00100000
 $(BASFLASH_EXEC): LDCFILE=basflash.lk
 $(BASFLASH_EXEC): MAPFILE=basflash.map
 

bas.lk.in

@@ -1,6 +1,6 @@
 MEMORY
 {
-   bas_rom (RX) : ORIGIN = TARGET_ADDRESS, LENGTH = 0x00200000
+   bas_rom (RX) : ORIGIN = TARGET_ADDRESS, LENGTH = 0x00100000
    bas_ram (WX) : ORIGIN = 0x1FE00000, LENGTH = 0x00100000		/* target to copy BaS to */
 }
 

mcf5474.gdb

@@ -61,4 +61,6 @@ define ib
 	setup-dram
 end
 
+tr
 ib
+load

sources/BaS.c

@@ -205,8 +205,6 @@ void BaS(void)
 	vec_init();
 	xprintf("finished\r\n");
 
-	enable_coldfire_interrupts();
-
 	MCF_MMU_MMUCR = MCF_MMU_MMUCR_EN;	/* MMU on */
 
 	xprintf("IDE reset: ");
@@ -241,7 +239,6 @@ void BaS(void)
 	xprintf("finished\r\n");
 
 	sd_card_init();
-	srec_execute("BASFLASH.S19");
 
 	/*
 	 * memory setup
@@ -295,6 +292,8 @@ void BaS(void)
 		__asm__ __volatile__("move.w #0x0700,sr	\n\t" : : : "memory");
 	}
 
+	srec_execute("BASFLASH.S19");
+
 	/* Jump into the OS */
 	typedef void void_func(void);
 	typedef struct {
@@ -303,6 +302,7 @@ void BaS(void)
 	} ROM_HEADER;
 
 	xprintf("Call OS. BaS initialization finished...\r\n");
+	enable_coldfire_interrupts();
 
 	ROM_HEADER* os_header = (ROM_HEADER*)TOS;
 	os_header->initial_pc();

sources/basflash.c

@@ -308,8 +308,8 @@ err_t srec_load(char *flash_filename)
 
 void basflash(void)
 {
-	const char *basflash_str = "\\BASFLASH\\";
+	const char *basflash_str = "\\BASFLASH";
-	const char *bastest_str = "\\BASTEST\\";
+	const char *bastest_str = "\\BASTEST";
 	DRESULT res;
 	FRESULT fres;
 	FATFS fs;
@@ -351,6 +351,7 @@ void basflash(void)
 							strcpy(path, bastest_str);
 							strncat(path, fileinfo.fname, 13);
 
+							xprintf("loading file %s\n", path);
 							/*
 							 * load file
 							 */

sources/basflash_start.c

@@ -5,10 +5,22 @@
  *      Author: mfro
  */
 
+#include <stdint.h>
 
+static uint32_t ownstack[4096];
+static uint32_t *stackptr = &ownstack[4095];
+
+/*
+ * setup our own stack in SDRAM to prevent clashing BaS's in SRAM (size limited).
+ */
 void startup(void)
 {
-	void basflash(void);
+	static uint32_t oldstack;
 
+	void basflash(void);
+	__asm__ __volatile__("move.l	sp,%0\n\t" : "=g"(oldstack) : :);
+	__asm__ __volatile__("move.l	%0,sp\n\t" : : "g"(stackptr) : );
 	basflash();
+	__asm__ __volatile__("move.l	%0,sp\n\t" : : "g"(oldstack) :);
+	(void) stackptr; /* make compiler happy about unused variables */
 }

sources/s19reader.c

@@ -32,6 +32,7 @@
 #include "diskio.h"
 #include "ff.h"
 #include "s19reader.h"
+#include "cache.h"
 
 /*
  * Yes, I know. The following doesn't really look like code should look like...
@@ -390,6 +391,7 @@ void srec_execute(char *flasher_filename)
 							xprintf("target successfully written and verified. Start address: %p\r\n", start_address);
 
 							func = start_address;
+							flush_and_invalidate_caches();
 							(*func)();
 						}
 						else

sources/startcf.S

@@ -46,6 +46,7 @@ _rom_entry:
 
 		/* set stack pointer to end of SRAM1 */
 		lea 	__SUP_SP,a7
+		move.l	#0,(sp)
 
 		/* Initialize the processor caches.
 		 * The instruction cache is fully enabled.