diff --git a/5474.gdb b/5474.gdb
new file mode 100644
index 0000000..64620a9
--- /dev/null
+++ b/5474.gdb
@@ -0,0 +1,50 @@
+#
+# GDB Init script for the Coldfire 5206 processor.
+#
+# The main purpose of this script is to configure the 
+# DRAM controller so code can be loaded.
+#
+#
+
+define addresses
+set $mbar  = 0xFF000000
+set $vbr   = 0x00000000
+set $rambar0 = 0xFF100000
+set $rambar1 = 0xFF101000
+end
+
+#
+# Setup the DRAM controller.
+#
+
+define setup-dram
+# Init CS0 (BootFLASH @ E000_0000 - E07F_FFFF 8Mbytes)
+set *((long *) 0xFF000500) = 0xE0000000
+set *((long *) 0xFF000508) = 0x00001180
+set *((long *) 0xFF000504) = 0x007F0001
+
+# SDRAM Initialization @ 0000_0000 - 1FFF_FFFF 512Mbytes
+# SDRAMDS configuration
+set *((long *) 0xFF000004) = 0x000002AA
+# SDRAM CS0 configuration (128Mbytes 0000_0000 - 07FF_FFFF)	
+set *((long *) 0xFF000020) = 0x0000001A
+# SDRAM CS1 configuration (128Mbytes 0800_0000 - 0FFF_FFFF)
+set *((long *) 0xFF000024) = 0x0800001A
+# SDRAM CS2 configuration (128Mbytes 1000_0000 - 17FF_FFFF)
+set *((long *) 0xFF000028) = 0x1000001A
+# SDRAM CS3 configuration (128Mbytes 1800_0000 - 1FFF_FFFF)
+set *((long *) 0xFF00002C) = 0x1800001A
+# SDCFG1
+set *((long *) 0xFF000108) = 0x53722938
+# SDCFG2
+set *((long *) 0xFF00010C) = 0x24330000
+end
+
+#
+# Wake up the board
+#
+
+define initBoard
+addresses
+setup-dram
+end
\ No newline at end of file