From 3101237277004e0e8607ddeb97cbece45c01022f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Markus=20Fr=C3=B6schle?= Date: Sun, 18 Nov 2012 09:29:36 +0000 Subject: [PATCH] deleted cfg directory which is not needed for gcc --- BaS_gcc/cfg/DDRAM.cfg | 57 ------------------------------------------- BaS_gcc/cfg/DDRAM.mem | 47 ----------------------------------- BaS_gcc/cfg/flash.cfg | 11 --------- BaS_gcc/cfg/mem.cfg | 48 ------------------------------------ BaS_gcc/cfg/mem.mem | 38 ----------------------------- 5 files changed, 201 deletions(-) delete mode 100644 BaS_gcc/cfg/DDRAM.cfg delete mode 100644 BaS_gcc/cfg/DDRAM.mem delete mode 100644 BaS_gcc/cfg/flash.cfg delete mode 100644 BaS_gcc/cfg/mem.cfg delete mode 100644 BaS_gcc/cfg/mem.mem diff --git a/BaS_gcc/cfg/DDRAM.cfg b/BaS_gcc/cfg/DDRAM.cfg deleted file mode 100644 index 7545850..0000000 --- a/BaS_gcc/cfg/DDRAM.cfg +++ /dev/null @@ -1,57 +0,0 @@ -; This is the board specific initialization file used in CodeWarrior Embedded product for ColdFire architecture -; $RCSfile: M5475EVB.cfg,v $ -; $Revision: 1.4 $ $Date: 2008/01/09 11:46:41 $ -; Please do NOT modifiy this file. If you wish to modify this file, please keep a backup copy of this file. - -ResetHalt - -;Set VBR - debugger must know this in order -; to do exception capture -writecontrolreg 0x0801 0x00000000 - -; If MBAR changes all following writes must change -; and if a memory configuration file is used, -; the reserved areas in the register block must -; change also. -;Turn on MBAR at 0xFF00_0000 -writecontrolreg 0x0C0F 0xFF000000 - -;Turn on RAMBAR0 at address FF10_0000 -writecontrolreg 0x0C04 0xFF100035 - -;Turn on RAMBAR1 at address FF10_1000 -writecontrolreg 0x0C05 0xFF101035 - -;Init CS0 (BootFLASH @ E000_0000 - E07F_FFFF 8Mbytes) -writemem.l 0xFF000500 0xE0000000; -writemem.l 0xFF000508 0x00101980; 16-bit port -writemem.l 0xFF000504 0x007F0001; - -;SDRAM Initialization @ 0000_0000 - 1FFF_FFFF 512Mbytes -writemem.l 0xFF000004 0x000002AA; SDRAMDS configuration -writemem.l 0xFF000020 0x0000001A; SDRAM CS0 configuration (128Mbytes 0000_0000 - 07FF_FFFF) -writemem.l 0xFF000024 0x0800001A; SDRAM CS1 configuration (128Mbytes 0800_0000 - 0FFF_FFFF) -writemem.l 0xFF000028 0x1000001A; SDRAM CS2 configuration (128Mbytes 1000_0000 - 07FF_FFFF) -writemem.l 0xFF00002C 0x1800001A; SDRAM CS3 configuration (128Mbytes 1800_0000 - 1FFF_FFFF) -;writemem.l 0xFF000108 0x73611730; SDCFG1 -writemem.l 0xFF000108 0x53611730; SDCFG1 -;writemem.l 0xFF00010C 0x46770000; SDCFG2 -writemem.l 0xFF00010C 0x24730000; SDCFG2 - -;writemem.l 0xFF000104 0xE10D0002; SDCR + IPALL -writemem.l 0xFF000104 0xE10F0002; SDCR + IPALL -writemem.l 0xFF000100 0x40010000; SDMR (write to LEMR) -;writemem.l 0xFF000100 0x048D0000; SDMR (write to LMR) -writemem.l 0xFF000100 0x04890000; SDMR (write to LMR) -;writemem.l 0xFF000104 0xE10D0002; SDCR + IPALL -writemem.l 0xFF000104 0xE10F0002; SDCR + IPALL -;writemem.l 0xFF000104 0xE10D0004; SDCR + IREF (first refresh) -writemem.l 0xFF000104 0xE10F0004; SDCR + IREF (first refresh) -;writemem.l 0xFF000104 0xE10D0004; SDCR + IREF (second refresh) -writemem.l 0xFF000104 0xE10F0004; SDCR + IREF (first refresh) -;writemem.l 0xFF000100 0x008D0000; SDMR (write to LMR) -writemem.l 0xFF000100 0x00890000; SDMR (write to LMR) -;writemem.l 0xFF000104 0x71100F00; SDCR (lock SDMR and enable refresh) -writemem.l 0xFF000104 0x71100F00; SDCR (lock SDMR and enable refresh) - -delay 1000 diff --git a/BaS_gcc/cfg/DDRAM.mem b/BaS_gcc/cfg/DDRAM.mem deleted file mode 100644 index 1bc400b..0000000 --- a/BaS_gcc/cfg/DDRAM.mem +++ /dev/null @@ -1,47 +0,0 @@ -// Memory Configuration File -// -// Description: -// A memory configuration file contains commands that define the legally accessible -// areas of memory for your specific board. Useful for example when the debugger -// tries to display the content of a "char *" variable, that has not yet been initialized. -// In this case the debugger may try to read from a bogus address, which could cause a -// bus error. -// -// Board: -// LogicPD COLDARI1 -// -// Reference: -// MCF5475RM.pdf - - -// All reserved ranges read back 0xBABA... -reservedchar 0xBA - -address MBAR_BASE 0xFF000000 -address MMUBAR_BASE 0xFF040000 - -usederivative "MCF5475" - -// Memory Map: -// ---------------------------------------------------------------------- -range 0x00000000 0x1FFFFFFF 4 ReadWrite // 512MB DDR SDRAM -reserved 0x20000000 0x5FFFFFFF - -range 0x60000000 0x7FFFFFFF 4 ReadWrite - -range 0x80000000 0xCFFFFFFF 4 ReadWrite - -range 0xD0000000 0xFBFFFFFF 4 ReadWrite - -reserved 0xFC000000 $MBAR_BASE-1 - - $MBAR_BASE $MBAR_BASE+0x3FFFF // Memory Mapped Registers -range $MBAR_BASE+0x10000 $MBAR_BASE+0x17FFC 4 ReadWrite // 32K Internal SRAM - -range $MMUBAR_BASE $MMUBAR_BASE+0xFFFF -reserved $MMUBAR_BASE+1x0000 0xFF0FFFFF // Added to fill gap in MMR - -range 0xFF100000 0xFF100FFF 4 ReadWrite // 4K SRAM0 (RAMBAR0) -range 0xFF101000 0xFFFFFFFF 4 ReadWrite // 4K SRAM1 (RAMBAR1) - - diff --git a/BaS_gcc/cfg/flash.cfg b/BaS_gcc/cfg/flash.cfg deleted file mode 100644 index cfa2772..0000000 --- a/BaS_gcc/cfg/flash.cfg +++ /dev/null @@ -1,11 +0,0 @@ -; This is the board specific initialization file used in CodeWarrior Embedded product for ColdFire architecture -; $RCSfile: M5475EVB.cfg,v $ -; $Revision: 1.4 $ $Date: 2008/01/09 11:46:41 $ -; Please do NOT modifiy this file. If you wish to modify this file, please keep a backup copy of this file. - - -;Init CS0 (BootFLASH @ FE00_0000 - FE7F_FFFF 8Mbytes) -writemem.l 0xFF000500 0xFE000000; -writemem.l 0xFF000508 0x00101980; 16-bit port -writemem.l 0xFF000504 0x007F0001; - diff --git a/BaS_gcc/cfg/mem.cfg b/BaS_gcc/cfg/mem.cfg deleted file mode 100644 index 20830c0..0000000 --- a/BaS_gcc/cfg/mem.cfg +++ /dev/null @@ -1,48 +0,0 @@ -; This is the board specific initialization file used in CodeWarrior Embedded product for ColdFire architecture -; $RCSfile: M5475EVB.cfg,v $ -; $Revision: 1.4 $ $Date: 2008/01/09 11:46:41 $ -; Please do NOT modifiy this file. If you wish to modify this file, please keep a backup copy of this file. - -ResetHalt - -;Set VBR - debugger must know this in order -; to do exception capture -writecontrolreg 0x0801 0x00000000 - -; If MBAR changes all following writes must change -; and if a memory configuration file is used, -; the reserved areas in the register block must -; change also. -;Turn on MBAR at 0xFF00_0000 -writecontrolreg 0x0C0F 0xFF000000 - -;Turn on RAMBAR0 at address FF10_0000 -writecontrolreg 0x0C04 0xFF100035 - -;Turn on RAMBAR1 at address FF10_1000 -writecontrolreg 0x0C05 0xFF101035 - -;Init CS0 (BootFLASH @ E000_0000 - E07F_FFFF 8Mbytes) -writemem.l 0xFF000500 0xE0000000; -writemem.l 0xFF000508 0x00001180; 16-bit port -writemem.l 0xFF000504 0x007F0001; - -;SDRAM Initialization @ 0000_0000 - 1FFF_FFFF 512Mbytes -writemem.l 0xFF000004 0x000002AA; SDRAMDS configuration -writemem.l 0xFF000020 0x0000001A; SDRAM CS0 configuration (128Mbytes 0000_0000 - 07FF_FFFF) -writemem.l 0xFF000024 0x0800001A; SDRAM CS1 configuration (128Mbytes 0800_0000 - 0FFF_FFFF) -writemem.l 0xFF000028 0x1000001A; SDRAM CS2 configuration (128Mbytes 1000_0000 - 17FF_FFFF) -writemem.l 0xFF00002C 0x1800001A; SDRAM CS3 configuration (128Mbytes 1800_0000 - 1FFF_FFFF) -writemem.l 0xFF000108 0x53722938; SDCFG1 -writemem.l 0xFF00010C 0x24330000; SDCFG2 - -writemem.l 0xFF000104 0xE10F0002; SDCR + IPALL -writemem.l 0xFF000100 0x40010000; SDMR (write to LEMR) -writemem.l 0xFF000100 0x05890000; SDRM (write to LMR) -writemem.l 0xFF000104 0xE10F0002; SDCR + IPALL -writemem.l 0xFF000104 0xE10F0004; SDCR + IREF (first refresh) -writemem.l 0xFF000104 0xE10F0004; SDCR + IREF (second refresh) -writemem.l 0xFF000100 0x01890000; SDMR (write to LMR) -writemem.l 0xFF000104 0x710F0F00; SDCR (lock SDMR and enable refresh) - -delay 1000 diff --git a/BaS_gcc/cfg/mem.mem b/BaS_gcc/cfg/mem.mem deleted file mode 100644 index 46bda65..0000000 --- a/BaS_gcc/cfg/mem.mem +++ /dev/null @@ -1,38 +0,0 @@ -// Memory Configuration File -// -// Description: -// A memory configuration file contains commands that define the legally accessible -// areas of memory for your specific board. Useful for example when the debugger -// tries to display the content of a "char *" variable, that has not yet been initialized. -// In this case the debugger may try to read from a bogus address, which could cause a -// bus error. -// -// Board: -// LogicPD COLDARI1 -// -// Reference: -// MCF5475RM.pdf - - -// All reserved ranges read back 0xBABA... -reservedchar 0xBA - -address MBAR_BASE 0xFF000000 -address MMUBAR_BASE 0xFF040000 - -usederivative "MCF5475" - -// Memory Map: -// ---------------------------------------------------------------------- -range 0x00000000 0x1FFFFFFF 4 ReadWrite // 512MB DDR SDRAM -reserved 0x20000000 $MBAR_BASE-1 - - $MBAR_BASE $MBAR_BASE+0x3FFFF 4 ReadWrite // Memory Mapped Registers -range $MBAR_BASE+0x10000 $MBAR_BASE+0x17FFC 4 ReadWrite // 32K Internal SRAM -reserved $MBAR_BASE+0x17FFD $MBAR_BASE+0x1FFBF - - $MMUBAR_BASE $MMUBAR_BASE+0x001B -reserved $MMUBAR_BASE+0x001C 0xFF0FFFFF - -range 0xFF100000 0xFF100FFF 4 ReadWrite // 4K SRAM0 (RAMBAR0) -range 0xFF101000 0xFF101FFF 4 ReadWrite // 4K SRAM1 (RAMBAR1)