/*
* BaS
*
* This file is part of BaS_gcc.
*
* BaS_gcc is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* BaS_gcc is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with BaS_gcc. If not, see .
*
* Copyright 2010 - 2012 F. Aschwanden
* Copyright 2011 - 2012 V. Riviere
* Copyright 2012 M. Froeschle
*/
#include
#include "MCF5475.h"
#include "startcf.h"
#include "sysinit.h"
#include "util.h"
#include "cache.h"
#include "bas_printf.h"
#include "bas_string.h"
#include "bas_types.h"
#include "bas_utils.h"
#include "sd_card.h"
#include "wait.h"
#include "ff.h"
#include "s19reader.h"
#include "mmu.h"
#include "dma.h"
#include "net.h"
#include "eth.h"
#include "nbuf.h"
#include "nif.h"
#include "fec.h"
#include "bootp.h"
#include "interrupts.h"
#include "exceptions.h"
#include "net_timer.h"
#include "pci.h"
#include "usb.h"
#include "video.h"
#include "driver_mem.h"
// #define DEBUG
#include "debug.h"
/* imported routines */
extern int vec_init();
extern void set_ide_access_mode(void);
/* Symbols from the linker script */
extern uint8_t _STRAM_END[];
#define STRAM_END ((uint32_t)_STRAM_END)
extern uint8_t _TOS[];
#define TOS ((uint32_t)_TOS) /* final TOS location */
extern uint8_t _FASTRAM_END[];
#define FASTRAM_END ((uint32_t)_FASTRAM_END)
extern uint8_t _EMUTOS[];
#define EMUTOS ((uint32_t)_EMUTOS) /* where EmuTOS is stored in flash */
extern uint8_t _EMUTOS_SIZE[];
#define EMUTOS_SIZE ((uint32_t)_EMUTOS_SIZE) /* size of EmuTOS, in bytes */
bool fpga_configured = false; /* for FPGA JTAG configuration */
extern volatile long _VRAM; /* start address of video ram from linker script */
#if defined(MACHINE_FIREBEE)
static bool i2c_transfer_finished(void)
{
if (MCF_I2C_I2SR & MCF_I2C_I2SR_IIF)
return true;
return false;
}
static void wait_i2c_transfer_finished(void)
{
waitfor(1000, i2c_transfer_finished); /* wait until interrupt bit has been set */
MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF; /* clear interrupt bit (byte transfer finished */
}
static bool i2c_bus_free(void)
{
return (MCF_I2C_I2SR & MCF_I2C_I2SR_IBB);
}
/*
* TFP410 (DVI) on
*/
static void dvi_on(void)
{
uint8_t receivedByte;
uint8_t dummyByte; /* only used for a dummy read */
int num_tries = 0;
xprintf("DVI digital video output initialization: ");
MCF_I2C_I2FDR = 0x3c; /* divide system clock by 1280: 100kHz standard */
do
{
/* disable all i2c interrupt routing targets */
MCF_I2C_I2ICR = 0x0; // ~(MCF_I2C_I2ICR_IE | MCF_I2C_I2ICR_RE | MCF_I2C_I2ICR_TE | MCF_I2C_I2ICR_BNBE);
/* disable i2c, disable i2c interrupts, slave, receive, i2c = acknowledge, no repeat start */
MCF_I2C_I2CR = 0x0;
/* repeat start, transmit acknowledge */
MCF_I2C_I2CR = MCF_I2C_I2CR_RSTA | MCF_I2C_I2CR_TXAK;
receivedByte = MCF_I2C_I2DR; /* read a byte */
MCF_I2C_I2SR = 0x0; /* clear status register */
MCF_I2C_I2CR = 0x0; /* clear control register */
MCF_I2C_I2ICR = MCF_I2C_I2ICR_IE; /* route i2c interrupts to cpu */
/* i2c enable, master mode, transmit acknowledge */
MCF_I2C_I2CR = MCF_I2C_I2CR_IEN | MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX;
MCF_I2C_I2DR = 0x7a; /* send data: address of TFP410 */
wait_i2c_transfer_finished();
if (MCF_I2C_I2SR & MCF_I2C_I2SR_RXAK) /* next try if no acknowledge */
goto try_again;
MCF_I2C_I2DR = 0x00; /* send data: SUB ADRESS 0 */
wait_i2c_transfer_finished();
MCF_I2C_I2CR |= MCF_I2C_I2CR_RSTA; /* repeat start */
MCF_I2C_I2DR = 0x7b; /* begin read */
wait_i2c_transfer_finished();
if (MCF_I2C_I2SR & MCF_I2C_I2SR_RXAK) /* next try if no acknowledge */
goto try_again;
#ifdef _NOT_USED_
MCH_I2C_I2CR &= ~MCF_I2C_I2CR_MTX; /* FIXME: not clear where this came from ... */
#endif /* _NOT_USED_ */
MCF_I2C_I2CR &= 0xef; /* ... this actually disables the I2C module... */
dummyByte = MCF_I2C_I2DR; /* dummy read */
wait_i2c_transfer_finished();
MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK; /* transmit acknowledge enable */
receivedByte = MCF_I2C_I2DR; /* read a byte */
wait_i2c_transfer_finished();
MCF_I2C_I2CR = MCF_I2C_I2CR_IEN; /* stop */
dummyByte = MCF_I2C_I2DR; // dummy read
if (receivedByte != 0x4c)
goto try_again;
MCF_I2C_I2CR = 0x0; // stop
MCF_I2C_I2SR = 0x0; // clear sr
waitfor(10000, i2c_bus_free);
MCF_I2C_I2CR = 0xb0; // on tx master
MCF_I2C_I2DR = 0x7A;
wait_i2c_transfer_finished();
if (MCF_I2C_I2SR & MCF_I2C_I2SR_RXAK)
goto try_again;
MCF_I2C_I2DR = 0x08; // SUB ADRESS 8
wait_i2c_transfer_finished();
MCF_I2C_I2DR = 0xbf; // ctl1: power on, T:M:D:S: enable
wait_i2c_transfer_finished();
MCF_I2C_I2CR = 0x80; // stop
dummyByte = MCF_I2C_I2DR; // dummy read
MCF_I2C_I2SR = 0x0; // clear sr
waitfor(10000, i2c_bus_free);
MCF_I2C_I2CR = 0xb0;
MCF_I2C_I2DR = 0x7A;
wait_i2c_transfer_finished();
if (MCF_I2C_I2SR & MCF_I2C_I2SR_RXAK)
goto try_again;
MCF_I2C_I2DR = 0x08; // SUB ADRESS 8
wait_i2c_transfer_finished();
MCF_I2C_I2CR |= 0x4; // repeat start
MCF_I2C_I2DR = 0x7b; // beginn read
wait_i2c_transfer_finished();
if (MCF_I2C_I2SR & MCF_I2C_I2SR_RXAK)
goto try_again;
MCF_I2C_I2CR &= 0xef; // switch to rx
dummyByte = MCF_I2C_I2DR; // dummy read
wait_i2c_transfer_finished();
MCF_I2C_I2CR |= 0x08; // txak=1
wait(50);
receivedByte = MCF_I2C_I2DR;
wait_i2c_transfer_finished();
MCF_I2C_I2CR = 0x80; // stop
dummyByte = MCF_I2C_I2DR; // dummy read
try_again:
num_tries++;
} while ((receivedByte != 0xbf) && (num_tries < 10));
if (num_tries >= 10)
{
xprintf("FAILED!\r\n");
}
else
{
xprintf("finished\r\n");
}
(void) dummyByte; /* Avoid warning */
}
/*
* AC97
*/
static void init_ac97(void)
{
// PSC2: AC97 ----------
int i;
int zm;
int va;
int vb;
int vc;
xprintf("AC97 sound chip initialization: ");
MCF_PAD_PAR_PSC2 = MCF_PAD_PAR_PSC2_PAR_RTS2_RTS // PSC2=TX,RX BCLK,CTS->AC'97
| MCF_PAD_PAR_PSC2_PAR_CTS2_BCLK
| MCF_PAD_PAR_PSC2_PAR_TXD2
| MCF_PAD_PAR_PSC2_PAR_RXD2;
MCF_PSC2_PSCMR1 = 0x0;
MCF_PSC2_PSCMR2 = 0x0;
MCF_PSC2_PSCIMR = 0x0300;
MCF_PSC2_PSCSICR = 0x03; //AC97
MCF_PSC2_PSCRFCR = 0x0f000000;
MCF_PSC2_PSCTFCR = 0x0f000000;
MCF_PSC2_PSCRFAR = 0x00F0;
MCF_PSC2_PSCTFAR = 0x00F0;
for (zm = 0; zm < 100000; zm++) // wiederholen bis synchron
{
MCF_PSC2_PSCCR = 0x20;
MCF_PSC2_PSCCR = 0x30;
MCF_PSC2_PSCCR = 0x40;
MCF_PSC2_PSCCR = 0x05;
// MASTER VOLUME -0dB
MCF_PSC2_PSCTB_AC97 = 0xE0000000; //START SLOT1 + SLOT2, FIRST FRAME
MCF_PSC2_PSCTB_AC97 = 0x02000000; //SLOT1:WR REG MASTER VOLUME adr 0x02
for (i = 2; i < 13; i++)
{
MCF_PSC2_PSCTB_AC97 = 0x0; //SLOT2-12:WR REG ALLES 0
}
// read register
MCF_PSC2_PSCTB_AC97 = 0xc0000000; //START SLOT1 + SLOT2, FIRST FRAME
MCF_PSC2_PSCTB_AC97 = 0x82000000; //SLOT1:master volume
for (i = 2; i < 13; i++)
{
MCF_PSC2_PSCTB_AC97 = 0x00000000; //SLOT2-12:RD REG ALLES 0
}
wait(50);
va = MCF_PSC2_PSCTB_AC97;
if ((va & 0x80000fff) == 0x80000800) {
vb = MCF_PSC2_PSCTB_AC97;
vc = MCF_PSC2_PSCTB_AC97;
/* FIXME: that looks more than suspicious (Fredi?) */
/* fixed with parentheses to avoid compiler warnings, but this looks still more than wrong to me */
if (((va & 0xE0000fff) == 0xE0000800) & (vb == 0x02000000) & (vc == 0x00000000)) {
goto livo;
}
}
}
xprintf(" NOT");
livo:
// AUX VOLUME ->-0dB
MCF_PSC2_PSCTB_AC97 = 0xE0000000; //START SLOT1 + SLOT2, FIRST FRAME
MCF_PSC2_PSCTB_AC97 = 0x16000000; //SLOT1:WR REG AUX VOLUME adr 0x16
MCF_PSC2_PSCTB_AC97 = 0x06060000; //SLOT1:VOLUME
for (i = 3; i < 13; i++) {
MCF_PSC2_PSCTB_AC97 = 0x0; //SLOT2-12:WR REG ALLES 0
}
// line in VOLUME +12dB
MCF_PSC2_PSCTB_AC97 = 0xE0000000; //START SLOT1 + SLOT2, FIRST FRAME
MCF_PSC2_PSCTB_AC97 = 0x10000000; //SLOT1:WR REG MASTER VOLUME adr 0x02
for (i = 2; i < 13; i++) {
MCF_PSC2_PSCTB_AC97 = 0x0; //SLOT2-12:WR REG ALLES 0
}
// cd in VOLUME 0dB
MCF_PSC2_PSCTB_AC97 = 0xE0000000; //START SLOT1 + SLOT2, FIRST FRAME
MCF_PSC2_PSCTB_AC97 = 0x12000000; //SLOT1:WR REG MASTER VOLUME adr 0x02
for (i = 2; i < 13; i++) {
MCF_PSC2_PSCTB_AC97 = 0x0; //SLOT2-12:WR REG ALLES 0
}
// mono out VOLUME 0dB
MCF_PSC2_PSCTB_AC97 = 0xE0000000; //START SLOT1 + SLOT2, FIRST FRAME
MCF_PSC2_PSCTB_AC97 = 0x06000000; //SLOT1:WR REG MASTER VOLUME adr 0x02
MCF_PSC2_PSCTB_AC97 = 0x00000000; //SLOT1:WR REG MASTER VOLUME adr 0x02
for (i = 3; i < 13; i++) {
MCF_PSC2_PSCTB_AC97 = 0x0; //SLOT2-12:WR REG ALLES 0
}
MCF_PSC2_PSCTFCR |= MCF_PSC_PSCTFCR_WFR; //set EOF
MCF_PSC2_PSCTB_AC97 = 0x00000000; //last data
xprintf(" finished\r\n");
}
#endif /* MACHINE_FIREBEE */
#ifdef MACHINE_FIREBEE
static void wait_pll(void)
{
int32_t trgt = MCF_SLT0_SCNT - 100000;
do
{
;
} while ((* (volatile int16_t *) 0xf0000800 < 0) && MCF_SLT0_SCNT > trgt);
}
static volatile uint8_t *pll_base = (volatile uint8_t *) 0xf0000600;
static void init_pll(void)
{
xprintf("FPGA PLL initialization: ");
wait_pll();
* (volatile uint16_t *) (pll_base + 0x48) = 27; /* loopfilter r */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x08) = 1; /* charge pump 1 */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x00) = 12; /* N counter high = 12 */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x40) = 12; /* N counter low = 12 */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x114) = 1; /* ck1 bypass */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x118) = 1; /* ck2 bypass */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x11c) = 1; /* ck3 bypass */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x10) = 1; /* ck0 high = 1 */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x50) = 1; /* ck0 low = 1 */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x144) = 1; /* M odd division */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x44) = 1; /* M low = 1 */
wait_pll();
* (volatile uint16_t *) (pll_base + 0x04) = 145; /* M high = 145 = 146 MHz */
wait_pll();
* (volatile uint8_t *) 0xf0000800 = 0; /* set */
xprintf("finished\r\n");
}
/*
* INIT VIDEO DDR RAM
*/
static void init_video_ddr(void) {
xprintf("init video RAM: ");
* (volatile uint16_t *) 0xf0000400 = 0xb; /* set cke = 1, cs=1, config = 1 */
NOP();
_VRAM = 0x00050400; /* IPALL */
NOP();
_VRAM = 0x00072000; /* load EMR pll on */
NOP();
_VRAM = 0x00070122; /* load MR: reset pll, cl=2, burst=4lw */
NOP();
_VRAM = 0x00050400; /* IPALL */
NOP();
_VRAM = 0x00060000; /* auto refresh */
NOP();
_VRAM = 0x00060000; /* auto refresh */
NOP();
/* FIXME: what's this? */
_VRAM = 0x00070022; /* load MR dll on */
NOP();
* (uint32_t *) 0xf0000400 = 0x01070082; /* fifo on, refresh on, ddrcs und cke on, video dac on, Falcon shift mode on */
xprintf("finished\r\n");
}
#endif /* MACHINE_FIREBEE */
/*
* check if it is possible to transfer data to PIC
*/
static inline bool pic_txready(void)
{
if (MCF_PSC3_PSCSR & MCF_PSC_PSCSR_TXRDY)
{
return true;
}
return false;
}
/*
* check if it is possible to receive data from PIC
*/
static inline bool pic_rxready(void)
{
if (MCF_PSC3_PSCSR & MCF_PSC_PSCSR_RXRDY)
{
return true;
}
return false;
}
void write_pic_byte(uint8_t value)
{
/*
* Wait until the transmitter is ready or 1000us are passed
*/
waitfor(1000, pic_txready);
/*
* Transmit the byte
*/
*(volatile uint8_t*)(&MCF_PSC3_PSCTB_8BIT) = value; // Really 8-bit
}
uint8_t read_pic_byte(void)
{
/*
* Wait until a byte has been received or 1000us are passed
*/
waitfor(1000, pic_rxready);
/*
* Return the received byte
*/
return * (volatile uint8_t *) (&MCF_PSC3_PSCTB_8BIT); // Really 8-bit
}
void pic_init(void)
{
char answer[4] = "OLD";
xprintf("initialize the PIC: ");
/*
* Send the PIC initialization string
*/
write_pic_byte('A');
write_pic_byte('C');
write_pic_byte('P');
write_pic_byte('F');
/*
* Read the 3-char answer string. Should be "OK!".
*/
answer[0] = read_pic_byte();
answer[1] = read_pic_byte();
answer[2] = read_pic_byte();
answer[3] = '\0';
if (answer[0] != 'O' || answer[1] != 'K' || answer[2] != '!')
{
dbg("PIC initialization failed. Already initialized?\r\n");
}
else
{
xprintf("%s\r\n", answer);
}
}
void nvram_init(void)
{
int i;
xprintf("Restore the NVRAM data: ");
/* Request for NVRAM backup data */
write_pic_byte(0x01);
/* Check answer type */
if (read_pic_byte() != 0x81)
{
// FIXME: PIC protocol error
xprintf("FAILED\r\n");
return;
}
/* Restore the NVRAM backup to the FPGA */
for (i = 0; i < 64; i++)
{
uint8_t data = read_pic_byte();
* (volatile uint8_t*) 0xffff8961 = i;
* (volatile uint8_t*) 0xffff8963 = data;
}
xprintf("finished\r\n");
}
#define KBD_ACIA_CONTROL * ((uint8_t *) 0xfffffc00)
#define MIDI_ACIA_CONTROL * ((uint8_t *) 0xfffffc04)
#define MFP_INTR_IN_SERVICE_A * ((uint8_t *) 0xfffffa0f)
#define MFP_INTR_IN_SERVICE_B * ((uint8_t *) 0xfffffa11)
void acia_init()
{
xprintf("init ACIA: ");
/* init ACIA */
KBD_ACIA_CONTROL = 3; /* master reset */
NOP();
MIDI_ACIA_CONTROL = 3; /* master reset */
NOP();
KBD_ACIA_CONTROL = 0x96; /* clock div = 64, 8N1, RTS low, TX int disable, RX int enable */
NOP();
MFP_INTR_IN_SERVICE_A = 0xff;
NOP();
MFP_INTR_IN_SERVICE_B = 0xff;
NOP();
xprintf("finished\r\n");
}
void enable_coldfire_interrupts()
{
xprintf("enable interrupts: ");
#if defined(MACHINE_FIREBEE)
FBEE_INTR_CONTROL = 0L; /* disable all interrupts */
#endif /* MACHINE_FIREBEE */
MCF_EPORT_EPPAR = 0xaaa8; /* all interrupts on falling edge */
#ifdef _NOT_USED_
#if defined(MACHINE_FIREBEE)
/*
* TIN0 on the Coldfire is connected to the FPGA. TIN0 triggers every write
* access to 0xff8201 (vbasehi), i.e. everytime the video base address is written
*/
MCF_GPT0_GMS = MCF_GPT_GMS_ICT(1) | /* timer 0 on, video change capture on rising edge */
MCF_GPT_GMS_IEN |
MCF_GPT_GMS_TMS(1); /* route GPT0 interrupt on interrupt controller */
MCF_INTC_ICR62 = MCF_INTC_ICR_IL(7) |
MCF_INTC_ICR_IP(6); /* interrupt level 7, interrupt priority 6 */
MCF_INTC_IMRH = 0xbffffffe; /* psc3 and timer 0 int on */
#endif
#endif
xprintf("finished\r\n");
}
void enable_pci_interrupts()
{
dbg("enable PCI interrupts\r\n");
MCF_EPORT_EPIER = 0xfe; /* int 1-7 on */
MCF_EPORT_EPFR = 0xff; /* clear all pending interrupts */
MCF_INTC_IMRL = 0xffffff00; /* int 1-7 on */
MCF_INTC_IMRH = 0;
#if defined(MACHINE_FIREBEE)
FBEE_INTR_ENABLE = FBEE_INTR_INT_IRQ7 | /* enable pseudo bus error */
FBEE_INTR_INT_MFP_IRQ6 | /* enable MFP interrupts */
FBEE_INTR_INT_FPGA_IRQ5 | /* enable Firebee (PIC, PCI, ETH PHY, DVI, DSP) interrupts */
FBEE_INTR_INT_VSYNC_IRQ4 | /* enable vsync interrupts */
FBEE_INTR_PCI_INTA | /* enable PCI interrupts */
FBEE_INTR_PCI_INTB |
FBEE_INTR_PCI_INTC |
FBEE_INTR_PCI_INTD;
;
#elif defined(MACHINE_M5484LITE) || defined(MACHINE_M5475EVB)
/*
* MCF 5484 interrupts are configured at the CPLD for the FireEngine
*/
/* TODO: enable PCI interrupts on the LITEKIT */
#elif defined(MACHINE_M54455)
/* MCF 54455 interrupts are configured at the FPGA */
/* TODO: enable PCI interrupts on the MCF54455 */
#else
#error unknown machine!
#endif
}
void disable_coldfire_interrupts()
{
#if defined(MACHINE_FIREBEE)
FBEE_INTR_ENABLE = 0; /* disable all interrupts */
#endif /* MACHINE_FIREBEE */
MCF_EPORT_EPIER = 0x0;
MCF_INTC_IMRL = 0xfffffffe;
MCF_INTC_IMRH = 0xffffffff;
}
NIF nif1;
#if defined(MACHINE_M5484LITE) || defined(MACHINE_M5475EVB)
/*
* on the MCF 5484 LITEKIT, the second FEC interface is usable
*/
NIF nif2;
#endif
bool spurious_interrupt_handler(void *arg1, void *arg2)
{
err("spurious interrupt\r\n");
err("IMRH=%lx, IMRL=%lx\r\n", MCF_INTC_IMRH, MCF_INTC_IMRL);
err("IPRH=%lx, IPRL=%lx\r\n", MCF_INTC_IPRH, MCF_INTC_IPRL);
err("IRLR=%x\r\n", MCF_INTC_IRLR);
return true;
}
/*
* initialize the interrupt handler tables to dispatch interrupt requests from Coldfire devices
*/
void init_isr(void)
{
isr_init(); /* need to call that explicitely, otherwise isr table might be full */
/*
* register spurious interrupt handler
*/
if (!isr_register_handler(24, 6, 6, spurious_interrupt_handler, NULL, NULL))
{
dbg("unable to register spurious interrupt handler\r\n");
}
/*
* register the FEC interrupt handler
*/
if (!isr_register_handler(64 + INT_SOURCE_FEC0, 5, 1, fec0_interrupt_handler, NULL, (void *) &nif1))
{
dbg("unable to register isr for FEC0\r\n");
}
/*
* Register the DMA interrupt handler
*/
if (!isr_register_handler(64 + INT_SOURCE_DMA, 5, 3, dma_interrupt_handler, NULL, NULL))
{
dbg("unable to register isr for DMA\r\n");
}
#if defined(MACHINE_FIREBEE)
/*
* register GPT0 timer interrupt vector
*/
if (!isr_register_handler(64 + INT_SOURCE_GPT0, 5, 2, gpt0_interrupt_handler, NULL, NULL))
{
dbg("unable to register isr for GPT0 timer\r\n");
}
/*
* register the PIC interrupt handler
*/
if (!isr_register_handler(64 + INT_SOURCE_PSC3, 5, 5, pic_interrupt_handler, NULL, NULL))
{
dbg("Error: unable to register ISR for PSC3\r\n");
}
#endif /* MACHINE_FIREBEE */
/*
* register the XLB PCI interrupt handler
*/
if (!isr_register_handler(64 + INT_SOURCE_XLBPCI, 3, 0, xlbpci_interrupt_handler, NULL, NULL))
{
dbg("Error: unable to register isr for XLB PCI interrupts\r\n");
}
/*
* initialize arbiter timeout registers
*/
MCF_XLB_XARB_ADRTO = 0x1fffff;
MCF_XLB_XARB_DATTO = 0x1fffff;
MCF_XLB_XARB_BUSTO = 0xffffff;
MCF_XLB_XARB_IMR = MCF_XLB_XARB_IMR_SEAE | /* slave error acknowledge interrupt */
MCF_XLB_XARB_IMR_MME | /* multiple master at prio 0 interrupt */
MCF_XLB_XARB_IMR_TTAE | /* TT address only interrupt */
MCF_XLB_XARB_IMR_TTRE | /* TT reserved interrupt enable */
MCF_XLB_XARB_IMR_ECWE | /* external control word interrupt */
MCF_XLB_XARB_IMR_TTME | /* TBST/TSIZ mismatch interrupt */
MCF_XLB_XARB_IMR_BAE; /* bus activity tenure timeout interrupt */
if (!isr_register_handler(64 + INT_SOURCE_PCIARB, 5, 0, pciarb_interrupt_handler, NULL, NULL))
{
dbg("Error: unable to register isr for PCIARB interrupts\r\n");
return;
}
MCF_PCIARB_PACR = MCF_PCIARB_PACR_EXTMINTEN(0x1f) | /* external master broken interrupt */
MCF_PCIARB_PACR_INTMINTEN; /* internal master broken interrupt */
if (!isr_register_handler(64 + INT_SOURCE_XLBARB, 7, 1, xlbarb_interrupt_handler, NULL, NULL))
{
dbg("Error: unable to register isr for XLB ARB interrupts\r\n");
}
}
void ide_init(void)
{
/* IDE reset */
* (volatile uint8_t *) (0xffff8802 - 2) = 14;
* (volatile uint8_t *) (0xffff8802 - 0) = 0x80;
wait_ms(1);
* (volatile uint8_t *) (0xffff8802 - 0) = 0;
set_ide_access_mode();
}
/*
* probe for NEC compatible USB host controller and install if found
*/
void init_usb(void)
{
extern struct pci_device_id ohci_usb_pci_table[];
extern struct pci_device_id ehci_usb_pci_table[];
struct pci_device_id *board;
int32_t handle;
int usb_found = 0;
int index = 0;
/*
* disabled for now
*/
return;
inf("USB controller initialization:\r\n");
do
{
handle = pci_find_classcode(PCI_CLASS_SERIAL_USB | PCI_FIND_BASE_CLASS | PCI_FIND_SUB_CLASS, index++);
dbg("handle 0x%02x\r\n", handle);
if (handle > 0)
{
long id;
long pci_class;
xprintf("serial USB found at bus=0x%x, dev=0x%x, fnc=0x%x (0x%x)\r\n",
PCI_BUS_FROM_HANDLE(handle),
PCI_DEVICE_FROM_HANDLE(handle),
PCI_FUNCTION_FROM_HANDLE(handle),
handle);
id = swpl(pci_read_config_longword(handle, PCIIDR));
pci_class = swpl(pci_read_config_longword(handle, PCIREV));
if (pci_class >> 8 == PCI_CLASS_SERIAL_USB_EHCI)
{
board = ehci_usb_pci_table;
while (board->vendor)
{
if ((board->vendor == PCI_VENDOR_ID(id)) && board->device == PCI_DEVICE_ID(id))
{
if (usb_init(handle, board) >= 0)
{
usb_found++;
}
}
board++;
}
}
if (pci_class >> 8 == PCI_CLASS_SERIAL_USB_OHCI)
{
board = ohci_usb_pci_table;
while (board->vendor)
{
if ((board->vendor == PCI_VENDOR_ID(id)) && board->device == PCI_DEVICE_ID(id))
{
if (usb_init(handle, board) >= 0)
usb_found++;
}
board++;
}
}
}
} while (handle >= 0);
xprintf("finished (found %d USB controller(s))\r\n", usb_found);
}
/* Jump into the OS */
typedef void void_func(void);
struct rom_header
{
void *initial_sp;
void_func *initial_pc;
};
/*
* fix ST RAM header (address 0x0 and 0x4). FreeMiNT uses these vectors on CTRL-ALT-DEL.
*
* Beware: Newer compilers refuse to dereference pointers to NULL and abort (trap #7) if the following
* attribute isn't set.
*/
static void fix_stram_header() __attribute__((optimize("no-delete-null-pointer-checks")));
static void fix_stram_header()
{
struct rom_header *bas_header = (struct rom_header *) TARGET_ADDRESS;
struct rom_header *stram_header = (struct rom_header *) 0x0;
*stram_header = *bas_header;
}
void BaS(void)
{
uint8_t *src;
uint8_t *dst = (uint8_t *) TOS;
#if defined(MACHINE_FIREBEE) // initialize FireBee specific hardware components */
fpga_configured = init_fpga();
init_pll();
init_video_ddr();
dvi_on();
init_ac97();
pic_init();
nvram_init();
#endif /* MACHINE_FIREBEE */
driver_mem_init();
xprintf("initialize MMU: ");
mmu_init();
xprintf("finished\r\n");
xprintf("initialize Coldfire DMA: ");
dma_init();
xprintf("finished\r\n");
xprintf("copy EmuTOS: ");
/* copy EMUTOS */
src = (uint8_t *) EMUTOS;
memcpy(dst, src, EMUTOS_SIZE);
xprintf("finished\r\n");
xprintf("flush caches: ");
flush_and_invalidate_caches();
xprintf("finished\r\n");
xprintf("initialize exception vector table: ");
vec_init();
xprintf("finished\r\n");
memset((void *) 0x0200, 0x0, 0x0400);
#if defined(MACHINE_FIREBEE)
xprintf("IDE reset: \r\n");
ide_init();
xprintf("finished\r\n");
xprintf("enable MMU: ");
MCF_MMU_MMUCR = MCF_MMU_MMUCR_EN; /* MMU on */
NOP(); /* force pipeline sync */
xprintf("finished\r\n");
xprintf("enable video: ");
/*
* ATARI video modes "modeline"
*
* horizontal:
* high word: h_total
* low word: hsync_start
*
* vertical:
* high word v_total
* low word vsync_start
*
* can be calculated with umc ("universal modeline generator")
*
*/
struct atari_video_timing
{
uint16_t total;
uint16_t sync_start;
};
static volatile struct atari_video_timing *hor_640x480 = (volatile struct atari_video_timing *) 0xf0000410;
static volatile struct atari_video_timing *ver_640x480 = (volatile struct atari_video_timing *) 0xf0000414;
static volatile struct atari_video_timing *hor_320x240 = (volatile struct atari_video_timing *) 0xf0000418;
static volatile struct atari_video_timing *ver_320x240 = (volatile struct atari_video_timing *) 0xf000041c;
#undef VIDEO_25MHZ
#ifdef VIDEO_25MHZ
hor_640x480->total = 0x320; /* 800 */
hor_640x480->sync_start = 0x2ba; /* 698 */
ver_640x480->total = 0x20c; /* 524 */
ver_640x480->sync_start = 0x20a; /* 522 */
hor_320x240->total = 0x190; /* 400 */
hor_320x240->sync_start = 0x15d; /* 349 */
ver_320x240->total = 0x20c; /* 524 */
ver_320x240->sync_start = 0x20a; /* 522 */
#else /* 32 MHz */
hor_640x480->total = 0x370; /* 880 */
hor_640x480->sync_start = 0x2ba; /* 698 */
ver_640x480->total = 0x20d; /* 525 */
ver_640x480->sync_start = 0x20a; /* 522 */
hor_320x240->total = 0x2a0; /* 672 */
hor_320x240->sync_start = 0x1e0; /* 480 */
ver_320x240->total = 0x5a0; /* 480 */
ver_320x240->sync_start = 0x160; /* 352 */
#endif
/* fifo on, refresh on, ddrcs and cke on, video dac on */
* (volatile uint32_t *) 0xf0000400 = 0x01070082;
xprintf("finished\r\n");
#endif /* MACHINE_FIREBEE */
sd_card_init();
#if defined(MACHINE_FIREBEE)
/* set Falcon bus control register */
/* sets bit 3 and 6. Both are undefined on an original Falcon? */
* (volatile uint8_t *) 0xffff8007 = 0x48;
#endif /* MACHINE_FIREBEE */
/* ST RAM */
* (uint32_t *) 0x42e = STRAM_END; /* phystop TOS system variable */
* (uint32_t *) 0x420 = 0x752019f3; /* memvalid TOS system variable */
* (uint32_t *) 0x43a = 0x237698aa; /* memval2 TOS system variable */
* (uint32_t *) 0x51a = 0x5555aaaa; /* memval3 TOS system variable */
/* TT-RAM */
* (uint32_t *) 0x5a4 = FASTRAM_END; /* ramtop TOS system variable */
* (uint32_t *) 0x5a8 = 0x1357bd13; /* ramvalid TOS system variable */
#if defined(MACHINE_FIREBEE) /* m5484lite has no ACIA and no dip switch... */
acia_init();
#endif /* MACHINE_FIREBEE */
srec_execute("BASFLASH.S19");
xprintf("BaS initialization finished, enable interrupts\r\n");
init_isr();
enable_coldfire_interrupts();
MCF_INTC_IMRH = 0;
MCF_INTC_IMRL = 0;
dma_irq_enable();
fec_irq_enable(0, 5, 1);
enable_pci_interrupts();
init_pci();
video_init();
/* initialize USB devices */
// init_usb();
set_ipl(7); /* disable interrupts */
/*
* start FireTOS if DIP switch is set accordingly
*/
if (!(DIP_SWITCH & (1 << 6)))
{
extern uint8_t _FIRETOS[];
#define FIRETOS ((uint32_t)_FIRETOS) /* where FireTOS is stored in flash */
/* make sure MMU is disabled */
MCF_MMU_MMUCR = 0; /* MMU off */
NOP(); /* force pipeline sync */
/* ST RAM */
* (uint32_t *) 0x42e = STRAM_END; /* phystop TOS system variable */
* (uint32_t *) 0x420 = 0x752019f3; /* memvalid TOS system variable */
* (uint32_t *) 0x43a = 0x237698aa; /* memval2 TOS system variable */
* (uint32_t *) 0x51a = 0x5555aaaa; /* memval3 TOS system variable */
/* TT-RAM */
* (uint32_t *) 0x5a4 = FASTRAM_END; /* ramtop TOS system variable */
* (uint32_t *) 0x5a8 = 0x1357bd13; /* ramvalid TOS system variable */
xprintf("call FireTOS\r\n");
/* Jump into FireTOS */
void_func* FireTOS = (void_func*) FIRETOS;
FireTOS(); // Should never return
}
/*
* fix initial pc/sp in ST RAM for FreeMiNT. It expects valid values there
* like on original STs (where these values reside in ROM) and uses them on
* CTRL-ALT-DELETE reboots.
*/
fix_stram_header();
xprintf("call EmuTOS\r\n");
struct rom_header *os_header = (struct rom_header *) TOS;
os_header->initial_pc();
}