diff --git a/BaS_GNU/sources/startcf.c b/BaS_GNU/sources/startcf.c
index 9376197..916295c 100644
--- a/BaS_GNU/sources/startcf.c
+++ b/BaS_GNU/sources/startcf.c
@@ -1,77 +1,35 @@
-/*
- *    CF_Startup.c - Default init/startup/termination routines for
- *                     Embedded Metrowerks C++
- *
- *    Copyright � 1993-1998 Metrowerks, Inc. All Rights Reserved.
- *    Copyright � 2005 Freescale semiConductor Inc. All Rights Reserved.
- *
- *
- *    THEORY OF OPERATION
- *
- *    This version of thestartup code is intended for linker relocated
- *    executables.  The startup code will assign the stack pointer to
- *    __SP_INIT, assign the address of the data relative base address
- *    to a5, initialize the .bss/.sbss sections to zero, call any
- *    static C++ initializers and then call main.  Upon returning from
- *    main it will call C++ destructors and call exit to terminate.
- */
-
 #include <MCF5475.h>
 
-/* imported data */
-
-extern uint32_t _SP_INIT, _SDA_BASE;
-extern uint32_t _START_BSS, _END_BSS;
-extern uint32_t _START_SBSS, _END_SBSS;
-extern uint32_t __DATA_RAM, __DATA_ROM, __DATA_END;
-extern uint32_t __Bas_base;
-
-extern uint32_t __SUP_SP,__BOOT_FLASH;
-extern uint32_t rt_mbar;
-
-/* imported routines */
-
-extern int BaS(int, char **);
-
-/* exported routines */
-extern void __initialize_hardware(void);
-extern void init_slt(void);
-
-
 void _startup(void)
 {
-#ifdef _NOT_USED_
 	asm("\n\t"
-	"bra			warmstart\n\t"
-	"jmp			__BOOT_FLASH + 8					// ist zugleich reset vector\n\t"
-	"/* disable interrupts */\n\t"
+	"bra	warmstart\n\t"
+	"jmp	__BOOT_FLASH + 8 | ist zugleich reset vector\n\t"
+	"| disable interrupts\n\t"
 "warmstart:\n\t"
-	"// disable interrupts\n\t"
-	"move.w     	#0x2700,sr\n\t"
-	"// Initialize MBAR\n\t"
-	"MOVE.L		#__MBAR,D0\n\t"
-	"MOVEC		D0,MBAR\n\t"
-	"MOVE.L		D0,rt_mbar\n\t"
-"// mmu off\n\t"
-	"move.l		#__MMUBAR+1,d0\n\t"
-	movec		d0,MMUBAR				//mmubar setzen
-	clr.l		d0
-	move.l		d0,MCF_MMU_MMUCR		// mmu off
-        /* Initialize RAMBARs: locate SRAM and validate it */ \
-   	move.l 		#__RAMBAR0 + 0x7,d0		// supervisor only
-   	movec      	d0,RAMBAR0
-   	move.l 		#__RAMBAR1 + 0x1,d0		// on for all
-   	movec      	d0,RAMBAR1
-   	
-// STACKPOINTER AUF ENDE SRAM1
-	lea 			__SUP_SP,a7
-	
-// instruction cache on
-	move.l		#0x000C8100,d0
- 	movec		d0,cacr
- 	nop
-// initialize any hardware specific issues 
-	bra          __initialize_hardware   
-");
-#endif /* _NOT_USED_ */
+	"| disable interrupts\n\t"
+	"move.w #0x2700,sr\n\t"
+	"|// Initialize MBAR\n\t"
+	"MOVE.L	#__MBAR,D0\n\t"
+	"MOVEC	D0,MBAR\n\t"
+	"MOVE.L	D0,rt_mbar\n\t"
+	"| mmu off\n\t"
+	"move.l	#__MMUBAR+1,d0\n\t"
+	"movec	d0,MMUBAR	| mmubar setzen\n\t"
+	"clr.l	d0\n\t"
+	"move.l	d0,MCF_MMU_MMUCR\n\t | mmu off"
+    "|/* Initialize RAMBARs: locate SRAM and validate it */\n\t"
+   	"move.l	#__RAMBAR0 + 0x7,d0\n\t | supervisor only"
+   	"movec  d0,RAMBAR0\n\t"
+   	"move.l #__RAMBAR1 + 0x1,d0\n\t"""
+   	"movec  d0,RAMBAR1\n\t"
+	"| STACKPOINTER AUF ENDE SRAM1\n\t"
+	"lea 	__SUP_SP,a7\n\t"
+	"| instruction cache on\n\t"
+	"move.l	#0x000C8100,d0\n\t"
+ 	"movec	d0,cacr\n\t"
+ 	"nop\n\t"
+	"| initialize any hardware specific issues\n\t"
+	"bra    __initialize_hardware\n\t"
+);
 }