// Memory Configuration File
//
// Description:
//  A memory configuration file contains commands that define the legally accessible
//  areas of memory for your specific board. Useful for example when the debugger
//  tries to display the content of a "char *" variable, that has not yet been initialized.
//  In this case the debugger may try to read from a bogus address, which could cause a
//  bus error.
//
// Board:
//  LogicPD COLDARI1
//
// Reference:
//  MCF5475RM.pdf


// All reserved ranges read back 0xBABA...
reservedchar 0xBA

address 	MBAR_BASE 		0xFF000000 
address 	MMUBAR_BASE 	0xFF040000

usederivative "MCF5475"

//         Memory Map:
//         ----------------------------------------------------------------------
range		0x00000000 			0x1FFFFFFF 				4 ReadWrite		// 512MB DDR SDRAM
reserved	0x20000000 			0x5FFFFFFF

range		0x60000000			0x7FFFFFFF				4 ReadWrite

range		0x80000000			0xCFFFFFFF				4 ReadWrite			

range		0xD0000000			0xFBFFFFFF				4 ReadWrite
			
reserved	0xFC000000			$MBAR_BASE-1			

 			$MBAR_BASE 			$MBAR_BASE+0x3FFFF						// Memory Mapped Registers
range		$MBAR_BASE+0x10000	$MBAR_BASE+0x17FFC		4 ReadWrite		// 32K Internal SRAM

range		$MMUBAR_BASE		$MMUBAR_BASE+0xFFFF
reserved	$MMUBAR_BASE+1x0000	0xFF0FFFFF	     						// Added to fill gap in MMR

range      	0xFF100000 			0xFF100FFF 				4 ReadWrite		// 4K SRAM0 (RAMBAR0)
range      	0xFF101000 			0xFFFFFFFF 				4 ReadWrite		// 4K SRAM1 (RAMBAR1)